Add office photos
Filter interviews by
Eclat Engineering Consultants Interview Questions, Process, and Tips
Top Eclat Engineering Consultants Interview Questions and Answers
- Q1. What is the ratio of M25asked in Project Engineer - Civil interview
- Q2. Work environment is on roads is it okay for youasked in Assistant Engineer interview
- Q3. Unit Weight of 12mm bar?asked in Junior Project Engineer interview
Eclat Engineering Consultants Interview Experiences
5 interviews found
(3 Questions)
- Q1. What is the FAR???
- Q2. Cement, Sand, Aggregate Ratio of M25
- Q3. Unit Weight of 12mm bar?
- Ans.
Unit weight of 12mm bar is approximately 0.89 kg/m.
Unit weight of 12mm bar is calculated by the formula: (d^2/162) where d is the diameter of the bar in mm.
For a 12mm bar, the unit weight is (12^2/162) = 0.89 kg/m.
Unit weight is important in construction for calculating material quantities and costs.
Junior Project Engineer Interview Questions asked at other Companies
Selected
I was interviewed before Jun 2023.
(2 Questions)
- Q1. What is the ratio of M25
- Ans.
The ratio of M25 concrete is 1:1:2
The ratio of M25 concrete is 1 part cement, 1 part sand, and 2 parts aggregate
This ratio is commonly used in construction for medium strength concrete
For example, to make 1 cubic meter of M25 concrete, you would need 1/4 cubic meters of cement, 1/4 cubic meters of sand, and 1/2 cubic meters of aggregate
- Q2. Checklist of shuttering
- Ans.
Checklist of shuttering includes materials, dimensions, alignment, bracing, and inspection.
Materials needed for shuttering such as plywood, steel props, and formwork ties
Dimensions of the formwork to be checked against the structural drawings
Alignment of the formwork to ensure it is level and plumb
Bracing to support the formwork and prevent any movement during concrete pouring
Inspection of the shuttering before concret...
Interview Preparation Tips
Project Engineer - Civil Interview Questions asked at other Companies
Selected
I applied via Approached by Company and was interviewed in Sep 2022. There were 3 interview rounds.
(1 Question)
- Q1. HR generally asks about Qualification, Disignation, Toatal Work Experience and pay Scale.
(1 Question)
- Q1. Mainly about Codal Provisions(IRC, IS, ASTM, AASHTO) , Testing procedures, Work Methodology and Preparation of Design Mixes.
Interview Preparation Tips
I applied via Campus Placement and was interviewed in Apr 2022. There were 2 interview rounds.
(1 Question)
- Q1. About Transport and Traffic Subject
Interview Preparation Tips
2.Speaking Skills
3.Time Management
4.Work Hard
5.Quick Learner
Assistant Engineer Interview Questions asked at other Companies
Eclat Engineering Consultants interview questions for popular designations
Selected
I applied via Walk-in and was interviewed before Aug 2022. There was 1 interview round.
(5 Questions)
- Q1. Our pay is low ?
- Ans. Pay means you raised a question that we will provide only internship ?
- Q2. Are you willing to work for low salary and 2 months salary will be holded ?
- Ans. 2 months holding on what basis
- Q3. Willing to relocate
- Q4. What is your family background
- Q5. Work environment is on roads is it okay for you
- Ans.
Yes, I am comfortable working in a road environment as an Assistant Engineer.
I am comfortable working in various environments, including on roads.
I am aware of the potential hazards and safety protocols when working on roads.
I have experience working in similar environments, such as construction sites or outdoor projects.
Interview Preparation Tips
Assistant Engineer Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
Selected
I applied via Company Website and was interviewed in Jul 2024. There were 2 interview rounds.
(4 Questions)
- Q1. What is your experience in the Record to Report (RTR) domain?
- Ans.
I have 3 years of experience in the Record to Report domain, including preparing financial statements and reconciling accounts.
Prepared monthly financial statements in compliance with GAAP standards
Performed account reconciliations to ensure accuracy of financial data
Assisted in the implementation of new accounting software for improved efficiency
Collaborated with cross-functional teams to streamline RTR processes
- Q2. Are you comfortable with shift work?
- Q3. Can you provide a brief introduction about yourself?
- Q4. What is your current cost to company (CTC)?
(10 Questions)
- Q1. Can you provide a brief self-introduction and describe your current work profile?
- Q2. What precautions should be taken when mentioning details in your CV to ensure you can answer questions related to them effectively during an interview?
- Q3. What is the difference between revenue expenditure and capital expenditure?
- Ans.
Revenue expenditure is for day-to-day expenses while capital expenditure is for long-term assets.
Revenue expenditure is incurred for maintaining the business operations and generating revenue.
Capital expenditure is for acquiring assets that will provide benefits over multiple years.
Revenue expenditure is recorded in the income statement and is fully deductible in the year it is incurred.
Capital expenditure is recorded ...
- Q4. What is the difference between amortisation and depreciation?
- Ans.
Amortisation is the allocation of the cost of intangible assets over their useful life, while depreciation is the allocation of the cost of tangible assets over their useful life.
Amortisation is used for intangible assets like patents, copyrights, and trademarks.
Depreciation is used for tangible assets like buildings, machinery, and vehicles.
Amortisation is typically calculated using the straight-line method or the dec...
- Q5. How would you rate yourself in relation to your teammates?
- Q6. How would you calculate a rate in Excel?
- Ans.
To calculate a rate in Excel, use the formula: Rate = (Value 1 / Value 2) * 100
Enter the values you want to calculate the rate for in separate cells
In a new cell, use the formula: Rate = (Value 1 / Value 2) * 100
Value 1 is the numerator and Value 2 is the denominator
Multiply the result by 100 to get the rate percentage
For example, if Value 1 is 50 and Value 2 is 100, the formula would be: (50 / 100) * 100 = 50%
- Q7. What is the process for passing journal entries related to prepaid expenses and accruals?
- Ans.
Journal entries for prepaid expenses and accruals involve recognizing expenses before they are paid or revenue before it is received.
Prepaid expenses are initially recorded as assets and then expensed over time as they are used up.
Accruals involve recognizing expenses or revenue before cash is exchanged.
For prepaid expenses, a journal entry would involve debiting an expense account and crediting a prepaid expense accou...
- Q8. What is your understanding of accrual and deferred accounting?
- Ans.
Accrual accounting recognizes revenue and expenses when they are incurred, regardless of when cash is exchanged. Deferred accounting recognizes revenue and expenses when cash is is exchanged.
Accrual accounting records revenue when it is earned and expenses when they are incurred, regardless of when cash is received or paid.
Deferred accounting involves postponing the recognition of revenue or expenses until a later date...
- Q9. What is a contingent liability?
- Ans.
A contingent liability is a potential liability that may occur depending on the outcome of a future event.
Contingent liabilities are not recorded on the balance sheet but disclosed in the footnotes.
Examples include pending lawsuits, warranties, and guarantees.
The likelihood of the contingent liability and the amount involved must be assessed.
- Q10. What information do you have about Genpact?
- Ans.
Genpact is a global professional services firm specializing in digital transformation, analytics, and process optimization.
Genpact was founded in 1997 as a business unit within General Electric.
It became an independent company in 2005 and is headquartered in New York City.
Genpact offers services in areas such as finance and accounting, procurement, supply chain, and customer service.
The company has a presence in over 3...
Interview Preparation Tips
Senior Technical Support Associate Interview Questions & Answers
Tech Mahindra
Anonymous
posted on 18 Dec 2024
Selected
I applied via Naukri.com and was interviewed in Dec 2024. There were 2 interview rounds.
(15 Questions)
- Q1. What is split horison? How can we resolve it?
- Q2. What is BGP? How BGP works?
- Q3. What are the type of BGP and their AD value?
- Q4. What is routing protocol? What are the types of routing protocol?
- Q5. What is ospf?
- Q6. How do we prevent loop avoidance in BGP?
- Q7. What is OSI model? What are the layers of OSI model?
- Q8. How does tracerout works?
- Q9. If we see "*****" in tracerout, what it means?
- Q10. What are the states in BGP?
- Q11. If there is a non tech guys on site to replace faulty router with new router, how do you configure the new router?
- Q12. What are CE and PE routers?
- Q13. What is the command to assign an IP address on Juniper router interface?
- Q14. What are the parameters should match in BGP neighbourship?
- Q15. What is tftp?
(8 Questions)
- Q1. What is loop avoidance mechanism in BGP?
- Q2. How tracerout works? What is source and destination IP?
- Q3. What is public IP and private IP?
- Q4. How can we configure and a router with support of non tech guy onsite?
- Q5. What is firewall?
- Q6. What are the difference between router and switch?
- Q7. What is mpls?
- Q8. How ftp and tftp works?
Chandru sharp
Selected
I applied via Walk-in and was interviewed in Dec 2024. There were 2 interview rounds.
Process planning refers to the methodical approach of determining the best possible way to manufacture a product or deliver a service by considering various aspects such as resources, timelines, and methodologies involved in production or execution.
(5 Questions)
- Q1. Explain about previous process
- Q2. Explain about my work experience
- Q3. Explain about my work standard
- Q4. Explain about my managing method
- Q5. Explain about my working style
Saloni Ghag
I applied via Naukri.com and was interviewed in Dec 2024. There was 1 interview round.
(6 Questions)
- Q1. What is the difference between a development dependency and a regular dependency in software development?
- Ans.
Development dependencies are needed for development and testing, while regular dependencies are needed for the application to run.
Development dependencies are used during the development process, such as testing frameworks or build tools.
Regular dependencies are required for the application to function properly in production.
Development dependencies are typically listed in the devDependencies section of package.json, w...
- Q2. What do the symbols ^ and ~ represent in the package.json file?
- Ans.
Symbols ^ and ~ in package.json represent version ranges for dependencies.
The symbol ^ represents a range that allows minor version updates.
The symbol ~ represents a range that allows only patch updates.
For example, ^1.2.3 allows any version from 1.2.3 to <2.0.0, while ~1.2.3 allows any version from 1.2.3 to <1.3.0.
- Q3. How can a 404 page be handled in React routing?
- Ans.
404 page can be handled in React routing by creating a Route component with a path of '*' at the end of all other routes.
Create a Route component with a path of '*' at the end of all other routes in the Switch component.
Inside the '*' Route component, render a custom 404 page component.
Use the Switch component to ensure that only one Route is rendered at a time.
- Q4. Some Javascript coding questions.
- Q5. What is the component lifecycle in functional components?
- Ans.
Component lifecycle in functional components involves useEffect hook for side effects.
Functional components use useEffect hook to handle side effects like fetching data, subscribing to events, etc.
useEffect hook can be used to mimic componentDidMount, componentDidUpdate, and componentWillUnmount lifecycle methods.
useEffect hook takes a callback function as its first argument and an optional array of dependencies as its...
- Q6. Explain redux data flow
- Ans.
Redux data flow is a unidirectional flow of data in React applications using a centralized store.
Actions are dispatched to the store
Reducers update the state based on the action
Components subscribe to the store to access the updated state
Interview Preparation Tips
- Javascript
- React.Js
I applied via Naukri.com and was interviewed in Dec 2024. There was 1 interview round.
(8 Questions)
- Q1. How much exp in docker?
- Ans.
I have 2 years of experience working with Docker in various projects.
2 years of experience working with Docker in various projects
Proficient in creating Docker containers, managing images, and orchestrating containers using Docker Compose
Familiar with Docker Swarm and Kubernetes for container orchestration
Experience in troubleshooting Docker-related issues and optimizing container performance
- Q2. Do you have exp in Kubernetes?
- Ans.
Yes, I have experience in Kubernetes.
I have worked on deploying and managing applications on Kubernetes clusters.
I am familiar with creating and managing Kubernetes resources such as pods, deployments, services, and ingresses.
I have experience in using tools like kubectl and Helm for interacting with Kubernetes clusters.
I have implemented CI/CD pipelines using Kubernetes for automated deployment and scaling of applicat
- Q3. What is OOP?
- Ans.
OOP stands for Object-Oriented Programming, a programming paradigm based on the concept of objects.
OOP focuses on creating objects that contain data and methods to manipulate that data.
Encapsulation, inheritance, and polymorphism are key principles of OOP.
Examples of OOP languages include Java, C++, and Python.
- Q4. Types of polymorphism
- Ans.
Polymorphism in Java refers to the ability of a method to do different things based on the object it is acting upon.
Types of polymorphism in Java include method overloading and method overriding.
Method overloading is when multiple methods have the same name but different parameters.
Method overriding is when a subclass provides a specific implementation of a method that is already defined in its superclass.
- Q5. Thread in java
- Ans.
Threads in Java allow multiple tasks to run concurrently within a single program.
Threads are lightweight sub-processes that share the same memory space.
They are used to improve performance by allowing tasks to run simultaneously.
Examples include creating a new thread using the Thread class or implementing the Runnable interface.
- Q6. Knowledge in which spring modules
- Q7. What is spring profile
- Ans.
Spring profile is a way to segregate parts of your application configuration and make it only available in certain environments.
Spring profiles allow you to define different configurations for different environments such as development, testing, and production.
You can use @Profile annotation to specify which beans should be loaded based on the active profile.
Profiles can be activated in various ways such as through app...
- Q8. What is @PreAuthorize and @PostAuthorize
- Ans.
Annotations used in Spring Security to apply authorization rules before and after a method is called.
Used in Spring Security to define authorization rules
@PreAuthorize is used to apply authorization rules before a method is called
@PostAuthorize is used to apply authorization rules after a method is called
Both annotations support SpEL expressions for defining rules
Interview Preparation Tips
- Basics in java
- Spring security
- Spring Boot
- Docker
- Cloud Computing
Eclat Engineering Consultants Interview FAQs
Tell us how to improve this page.
Eclat Engineering Consultants Interviews By Designations
Interview Questions for Popular Designations
People are getting interviews through
Interview Questions from Similar Companies
Eclat Engineering Consultants Reviews and Ratings
based on 14 reviews
Rating in categories
|
Assistant Engineer
13
salaries
|  ₹2.2 L/yr - ₹4 L/yr |
|
Project Engineer
5
salaries
| ₹3 L/yr - ₹5 L/yr |
|
Assistant Engineer - Civil
5
salaries
| ₹1.4 L/yr - ₹4.5 L/yr |
|
Project Manager
4
salaries
| ₹7 L/yr - ₹8 L/yr |
|
Accounts Manager
4
salaries
| ₹3 L/yr - ₹5.4 L/yr |
TCS
Infosys
Wipro
Tech Mahindra
Calculate your in-hand salary
- Home >
- Interviews >
- Eclat Engineering Consultants Interview Questions
