i
DRA Homes
Filter interviews by
Calculate the weight of steel in a structure based on its dimensions and density
Determine the dimensions of the steel components (length, width, height)
Calculate the volume of each steel component using the formula: Volume = Length x Width x Height
Multiply the volume of each steel component by the density of steel (usually around 7850 kg/m^3) to get the weight
Sum up the weights of all steel components to get the total
I applied via Recruitment Consulltant and was interviewed before Jan 2023. There were 2 interview rounds.
DMC method is a pile foundation technique that involves driving piles into the ground using a drop hammer.
DMC stands for Drop Hammer Compaction method.
It is a commonly used technique in civil engineering for constructing pile foundations.
In this method, a pile is driven into the ground using a drop hammer, which is lifted and then dropped onto the pile.
The repeated impact of the drop hammer compacts the soil around the...
Waterproofing methodology involves various techniques to prevent water penetration and damage to structures.
Identify the source of water leakage or potential areas of water penetration
Select appropriate waterproofing materials based on the type of structure and water exposure
Prepare the surface by cleaning and repairing any cracks or damages
Apply waterproofing membranes or coatings to create a barrier against water
Ensu...
Cement and steel consumption for slab depends on the design, dimensions, and load requirements.
Cement consumption is determined by the thickness of the slab and the mix design.
Steel consumption is influenced by the span, load capacity, and reinforcement requirements.
For example, a 100mm thick slab may require around 0.5 cubic meters of cement per square meter.
Steel consumption can vary from 0.5% to 2% of the total slab...
Top trending discussions
posted on 29 Jan 2024
I applied via Campus Placement and was interviewed in Dec 2023. There was 1 interview round.
The density of steel is approximately 7.85 grams per cubic centimeter.
The density of steel is a measure of how much mass is contained in a given volume of steel.
It is commonly expressed in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).
The density of steel can vary depending on the specific type and composition of the steel alloy.
For example, the density of carbon steel is typically around 7.85...
Men are dominant in site work due to various societal and cultural factors.
Historically, construction and site work have been male-dominated industries.
Stereotypes and biases have led to fewer women pursuing careers in civil engineering and related fields.
Physical demands and safety concerns associated with site work may discourage some women from entering the field.
Lack of representation and mentorship for women in si...
I applied via Indeed and was interviewed in Oct 2023. There was 1 interview round.
Yes, standard codes are used for concrete mix design to ensure quality and safety.
Standard codes provide guidelines for selecting materials, proportions, and testing procedures for concrete mix design.
Examples of standard codes include ACI 318 for structural concrete and ASTM C94 for ready-mixed concrete.
Following standard codes helps ensure the durability, strength, and workability of the concrete mix.
I applied via Walk-in and was interviewed in Apr 2022. There were 3 interview rounds.
I applied via Walk-in and was interviewed before Jul 2023. There were 3 interview rounds.
General maths, logical reasoning
I will execute the structures by following the design plans, coordinating with various teams, ensuring quality control, and adhering to safety regulations.
Follow the design plans provided by the structural engineers
Coordinate with other teams such as architects, contractors, and subcontractors
Ensure quality control throughout the construction process
Adhere to safety regulations and standards
Regularly inspect the constr...
Some hurdles in execution include delays, budget constraints, unforeseen site conditions, and coordination issues.
Delays in obtaining permits or approvals
Budget constraints leading to value engineering or scope reductions
Unforeseen site conditions such as poor soil quality or environmental issues
Coordination issues with subcontractors or other project stakeholders
I applied via Approached by Company and was interviewed in Aug 2023. There were 4 interview rounds.
Written/Aptitude test: The first round for most of the companies is written round. ...
Concrete batch time affects the temperature of heat produced during the curing process.
The batch time of concrete refers to the duration for which the concrete ingredients are mixed together.
A longer batch time can lead to higher temperatures being produced during the curing process.
The heat generated during curing is important as it affects the strength and durability of the concrete.
Proper monitoring and control of b...
Types of footing include spread footings, mat foundations, pile foundations, and drilled caissons.
Spread footings are used for shallow foundations and distribute the load over a larger area.
Mat foundations are used for heavy loads and distribute the load over a larger area.
Pile foundations are used when soil conditions are poor and transfer the load to deeper, more stable soil layers.
Drilled caissons are used for heavy...
Yes, bricks absorb water due to their porous nature.
Bricks have small pores that allow water to seep in.
Water absorption can lead to deterioration of bricks over time.
Bricks with high absorption rates may not be suitable for certain climates or applications.
I applied via Walk-in and was interviewed in Aug 2024. There were 2 interview rounds.
General knowledge skills
Worked as a Project Engineer at a construction company for 5 years.
Managed multiple civil engineering projects simultaneously
Coordinated with architects, contractors, and clients to ensure project success
Performed site inspections and quality control checks
Prepared project schedules and budgets
Resolved any issues or conflicts that arose during construction
I was interviewed before Dec 2019.
General aptitude test where each question was related to the previous question, if you answered one wrong, others would go wrong too.
RERA act is a real estate regulatory act passed by the Indian parliament in 2016.
RERA stands for Real Estate (Regulation and Development) Act.
It aims to protect the interests of homebuyers and ensure timely completion of projects.
It mandates that all real estate projects must be registered with the regulatory authority.
Developers must deposit 70% of the funds collected from buyers in a separate bank account to ensure t...
based on 3 interviews
Interview experience
based on 2 reviews
Rating in categories
Project Engineer
14
salaries
| ₹0 L/yr - ₹0 L/yr |
Sales Manager
9
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
7
salaries
| ₹0 L/yr - ₹0 L/yr |
PRE Sales Executive
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Executive
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Prestige Group
Sobha
Godrej Properties
DLF