Upload Button Icon Add office photos

CLP India

Compare button icon Compare button icon Compare

Filter interviews by

CLP India Interview Questions and Answers

Updated 4 Feb 2024

CLP India Interview Experiences

Popular Designations

5 interviews found

I applied via Walk-in and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Switchyard schemes description
  • Ans. 

    Switchyard schemes are used to control and protect electrical power systems.

    • Switchyard schemes are designed to ensure safe and reliable operation of power systems.

    • They include various components such as circuit breakers, transformers, and protective relays.

    • Different types of switchyard schemes include single bus, double bus, and ring bus configurations.

    • Switchyard schemes can be used in both high voltage and low voltage...

  • Answered by AI
  • Q2. Generator protection description
  • Ans. 

    Generator protection is a system that ensures the safe and reliable operation of generators.

    • Generator protection systems monitor and protect generators from overloading, overvoltage, undervoltage, and other faults.

    • These systems use relays, sensors, and other devices to detect faults and trip the generator if necessary.

    • Common types of generator protection include overcurrent protection, differential protection, and dist...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and technically strong. They will shortlist based on resume.

Electrical Engineer Interview Questions asked at other Companies

Q1. What is the difference between Switch gear & Circuit Breakers ?
View answer (13)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I appeared for an interview before Feb 2023.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Why do you want to join this organization
  • Q2. What is performance of power plant. It runs on which cycle.why is it supercritical
  • Ans. 

    A power plant's performance is determined by its cycle. Supercritical cycles are used for higher efficiency.

    • The performance of a power plant is measured by its ability to convert fuel into electricity efficiently.

    • The cycle of a power plant refers to the thermodynamic process it uses to generate power.

    • Supercritical cycles operate at higher temperatures and pressures, resulting in improved efficiency.

    • Supercritical power ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be factual and to the point

Deputy Manager Interview Questions asked at other Companies

Q1. 1.WHAT IS SPECIAL OF UR HOME TOWN 2.Who is Main compitetor with us and which products...3.what is main business in your area and its functions...4 Previous comoany achevements 5.Your strengts and weakness.
View answer (72)

Deputy Manager Interview Questions & Answers

user image Satyabrat Satapathy

posted on 6 Oct 2023

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Previous work experience
Round 3 - Technical 

(1 Question)

  • Q1. Face to face interview

Deputy Manager Interview Questions asked at other Companies

Q1. 1.WHAT IS SPECIAL OF UR HOME TOWN 2.Who is Main compitetor with us and which products...3.what is main business in your area and its functions...4 Previous comoany achevements 5.Your strengts and weakness.
View answer (72)

Interview Questionnaire 

4 Questions

  • Q1. Is codes for concrete, bathing plant, reinforcement
  • Ans. 

    Yes, there are codes for concrete, batching plant, and reinforcement in civil engineering.

    • Codes for concrete include ACI 318, Eurocode 2, and BS 8110.

    • Codes for batching plant include ASTM C94 and ACI 304R.

    • Codes for reinforcement include ACI 318, Eurocode 2, and BS 8666.

    • These codes provide guidelines and standards for design, construction, and quality control in civil engineering projects.

  • Answered by AI
  • Q2. What is the procedure of NDT
  • Ans. 

    NDT stands for Non-Destructive Testing. It is a procedure used to inspect and evaluate materials without causing damage.

    • NDT involves various methods such as ultrasonic testing, radiography, magnetic particle testing, dye penetrant testing, and visual inspection.

    • The procedure is used to detect surface and subsurface defects, cracks, voids, and other imperfections in materials.

    • NDT is commonly used in industries such as a...

  • Answered by AI
  • Q3. What is the general safety procedures
  • Ans. 

    General safety procedures in civil engineering involve identifying hazards, implementing controls, and providing training.

    • Conducting regular safety inspections

    • Providing personal protective equipment (PPE)

    • Ensuring proper use of equipment and machinery

    • Implementing emergency response plans

    • Providing safety training to employees

    • Maintaining a clean and organized work environment

  • Answered by AI
  • Q4. Grade of concrete and design process
  • Ans. 

    Grade of concrete is a measure of its strength. Design process involves selecting the appropriate grade based on the intended use.

    • Grade of concrete is denoted by a number, such as M20 or M30, which represents its compressive strength in megapascals (MPa)

    • Design process involves determining the required strength, durability, and workability of the concrete based on the intended use and environmental conditions

    • Factors suc...

  • Answered by AI

Senior Civil Engineer Interview Questions asked at other Companies

Q1. Why reinforcement is provided alternative in column?
View answer (5)

CLP India interview questions for popular designations

 Deputy Manager

 (2)

 Electrical Technician

 (1)

 Electrical Engineer

 (1)

 Senior Civil Engineer

 (1)

Interview Preparation Tips

General Tips: This interview was a technical one but was majorly a stress test. It lasted for about 1 hour 10 minutes. The interviewer wanted to test both my knowledge and communication skills. Most of the questions asked to me were related to my B.Tech curriculum i.e. computer science related topics. He stressed a lot on the basics related to my project topic. Luckily I was able to answer most of the questions correctly. I tried to answer each question with examples and also used props on the table (like pens, paperweights, pen stands etc.) to explain my theories. It was my first offcampus interview, and I think I did pretty well for a fresher.
You need to stay calm and should apply presence of mind. Please go through the job description thoroughly word-by-word and recheck your resume to ensure that you are a best-fit for the position.

Electrical Technician Interview Questions asked at other Companies

Q1. Preventive Maintenance of All Kinds of H.V & LV Breakers, Motors, Voltage Up To 33 KV & 11 KV & 6.6.KV /2400 KW ,Transformer(15.75KV /230 KV ), Corrective Maintenance of HV/MV /LV Switches gears,VCB,ACB,MOCB,SF6 Breakers, Breake... read more
View answer (4)

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. What are the key aspects of turbine protection?
  • Ans. 

    Key aspects of turbine protection include overspeed protection, vibration monitoring, temperature monitoring, and lube oil system protection.

    • Overspeed protection is crucial to prevent catastrophic failure in case of excessive turbine speed.

    • Vibration monitoring helps detect any abnormal vibrations that could indicate potential issues with the turbine.

    • Temperature monitoring ensures that the turbine operates within safe t...

  • Answered by AI
  • Q2. Boiler light up?
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024.

Round 1 - HR 

(2 Questions)

  • Q1. What is your level of experience in the particular department?
  • Q2. What is your knowledge base?
  • Ans. 

    I possess a diverse knowledge base in management, operations, and team leadership, complemented by industry-specific insights.

    • Strong understanding of project management principles, demonstrated by successfully leading a cross-functional team to complete a project ahead of schedule.

    • Proficient in data analysis and reporting, utilizing tools like Excel and Tableau to drive informed decision-making.

    • Experience in budget man...

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Do you have knowledge of Microsoft Office?
  • Q2. How do you draft an email to share with a specific person?
  • Ans. 

    Drafting an email involves clarity, professionalism, and a clear purpose to effectively communicate with the recipient.

    • Use a clear subject line, e.g., 'Meeting Request for Project Update'.

    • Start with a polite greeting, e.g., 'Dear [Recipient's Name],'.

    • State the purpose of the email in the opening lines, e.g., 'I hope this message finds you well. I am writing to discuss...'.

    • Be concise and to the point, providing necessar...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - A fantastic work environment that emphasizes job security, opportunities for learning and development, teamwork, and flexible working arrangements.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

What is more important product quality and marketing

Round 2 - Technical 

(1 Question)

  • Q1. Tell me about self
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Boiler MFT, furnace purge Permissive, APH pa, sa and flue gas ratio, boiler losses etc.
  • Q2. Working drum elements system
  • Ans. 

    A working drum elements system is a mechanism that allows for the efficient and effective movement of drums.

    • The system should be designed to handle drums of various sizes and weights

    • It should include components such as rollers, conveyors, and lifters

    • The system should be automated to reduce manual labor and increase productivity

    • Regular maintenance and inspections are necessary to ensure the system is functioning properl

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Aug 2023. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Ask basic questions about your work profile.
Round 2 - Technical 

(1 Question)

  • Q1. Ask basic questions about your work profile.
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion and working profile details.

CLP India Interview FAQs

How many rounds are there in CLP India interview?
CLP India interview process usually has 2 rounds. The most common rounds in the CLP India interview process are Technical, Resume Shortlist and One-on-one Round.
How to prepare for CLP India interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at CLP India. The most common topics and skills that interviewers at CLP India expect are Business Reporting, Civil, Construction, Construction Management and Corporate Communication.
What are the top questions asked in CLP India interview?

Some of the top questions asked at the CLP India interview -

  1. Is codes for concrete, bathing plant, reinforcem...read more
  2. What is performance of power plant. It runs on which cycle.why is it supercriti...read more
  3. What is the general safety procedu...read more

Tell us how to improve this page.

CLP India Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more

Interview Questions from Similar Companies

R.K.M Powergen Interview Questions
4.0
 • 19 Interviews
SHV Energy Interview Questions
3.8
 • 13 Interviews
Enercon Interview Questions
3.8
 • 9 Interviews
View all

CLP India Reviews and Ratings

based on 86 reviews

4.3/5

Rating in categories

4.0

Skill development

4.3

Work-life balance

3.9

Salary

4.4

Job security

4.3

Company culture

3.5

Promotions

4.2

Work satisfaction

Explore 86 Reviews and Ratings
Deputy Manager
64 salaries
unlock blur

₹9 L/yr - ₹19 L/yr

Assistant Manager
28 salaries
unlock blur

₹6 L/yr - ₹10 L/yr

Senior Manager
8 salaries
unlock blur

₹25.4 L/yr - ₹30 L/yr

Manager
7 salaries
unlock blur

₹11.5 L/yr - ₹23 L/yr

Senior Engineer
7 salaries
unlock blur

₹5.8 L/yr - ₹6.2 L/yr

Explore more salaries
Compare CLP India with

Dhoot Transmission

3.6
Compare

R.K.M Powergen

4.0
Compare

SHV Energy

3.8
Compare

New Allenberry Works

3.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview