Upload Button Icon Add office photos

Filter interviews by

B. G. Shirke Construction Technology Junior Engineer Civil Interview Questions and Answers

Updated 12 Nov 2022

B. G. Shirke Construction Technology Junior Engineer Civil Interview Experiences

1 interview found

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What do you know about bar bending schedule.
  • Ans. 

    Bar bending schedule is a document that provides details of reinforcement steel bars, their shape, size, length, and quantity required for construction.

    • It is used by civil engineers and contractors for estimating the amount of steel required for a construction project.

    • It includes information about the diameter, length, and shape of each bar, as well as the number of bars required for each section of the structure.

    • It he...

  • Answered by AI
  • Q2. Prepare a bar bending schedule for footing .
  • Ans. 

    A bar bending schedule is a document that provides details of reinforcement steel bars, their shape, size, quantity, and placement in a concrete structure.

    • Determine the size and shape of the footing

    • Calculate the total length of steel required for the footing

    • Determine the spacing and diameter of the steel bars

    • Prepare a detailed drawing of the footing with the steel bars marked

    • List the steel bars in a table with their si

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Give your 100% best. Don't take tension. Answer every question confidently.

Interview questions from similar companies

I applied via Company Website and was interviewed in Jan 2022. There was 1 interview round.

Round 1 - HR 

(1 Question)

  • Q1. Tell me about yourself.

Interview Preparation Tips

Topics to prepare for L&T Energy Hydrocarbon Junior Engineer Civil interview:
  • Civil Engineering
  • Pile Foundation
  • Stone column
  • Steel fabricated
  • Send column
Interview preparation tips for other job seekers - My interview lasted 40 minutes and all the questions were asked. Three people attended this interview for me regarding my work.So after asking all the questions in my interview and writing the answer to it for me

I applied via Referral and was interviewed in May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. PSC girder design, BBS

Interview Preparation Tips

Interview preparation tips for other job seekers - One of the Best company for future, Ask high salary
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Assignment 

Main question will be on structures bases and finding quantity of shuttering, concrete, and some software like autocad, revit related basic questions

Round 3 - Technical 

(2 Questions)

  • Q1. Learn basic of software tools like autocad,revit and mostly excel
  • Q2. When come to pure cire be prepare with concept of reinforcement,types of curing,density if steel, labouratry test like initial and final setting of cement,slump cone test,many more

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare before interview regarding your resume, the company background,and technical question
Mostly question will comes related to which type of work the company will deal.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. 1) different between diafraam wall and retaining wall
  • Ans. 

    Diaphragm walls are used to create a barrier while retaining walls are used to hold back soil.

    • Diaphragm walls are underground walls that are used to create a barrier to prevent water from entering a construction site.

    • Retaining walls are used to hold back soil and prevent it from sliding or eroding.

    • Diaphragm walls are typically made of reinforced concrete and are used in deep excavations.

    • Retaining walls can be made of v...

  • Answered by AI
  • Q2. Which type of material used for shuttering
  • Ans. 

    Plywood, steel, aluminum, and plastic are commonly used materials for shuttering.

    • Plywood is the most commonly used material for shuttering due to its durability and affordability.

    • Steel is used for heavy-duty construction projects as it can withstand high pressure and weight.

    • Aluminum is lightweight and easy to handle, making it ideal for small-scale projects.

    • Plastic is a cost-effective option for simple construction pro...

  • Answered by AI
  • Q3. Calculate the bbs of 4 by 3m footing, d = 300mm , dia of steel = 12mm
  • Ans. 

    Calculate the bbs of a 4x3m footing with d=300mm and 12mm dia steel.

    • Calculate the total length of steel required

    • Determine the spacing between the bars

    • Prepare a detailed bar bending schedule

  • Answered by AI
  • Q4. Hot to calculate the quantity of concrete for trapezoidal footing
  • Ans. 

    To calculate the quantity of concrete for trapezoidal footing, we need to use the formula for volume of a trapezoidal prism.

    • Measure the length, width, and height of the trapezoidal footing

    • Calculate the area of the trapezoidal base using the formula (a+b)/2 * h

    • Calculate the volume of the trapezoidal prism using the formula area of base * height

    • Multiply the volume by the number of trapezoidal footings needed

    • Add an additi

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and tell about your experience then they ask questions from you work experience

I applied via Naukri.com and was interviewed in Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Shuttering area,RMC pour card etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Work culture is very tough, so if u are joining then be ready

I applied via Company Website and was interviewed in Jun 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Technical questions regarding our branch and field work
Round 3 - HR 

(1 Question)

  • Q1. Regarding experience and salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - This is just a formal advice to everyone those who are looking for PSP project limited joining their 2 round interview will be held one is our technical round and another one is hr round.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Building structure
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Technical 

(3 Questions)

  • Q1. Bar Bending Schedule
  • Q2. Find out shuttering Area
  • Ans. 

    Shuttering area can be calculated by finding the total surface area of the formwork used for concrete construction.

    • Calculate the surface area of each individual formwork used for the concrete structure

    • Add up the surface areas of all formworks to get the total shuttering area

    • Consider any openings or gaps in the formwork when calculating the area

  • Answered by AI
  • Q3. Semi circle area formula
  • Ans. 

    The formula for the area of a semi-circle is (1/2) * pi * r^2, where r is the radius of the semi-circle.

    • The formula for the area of a semi-circle is (1/2) * pi * r^2

    • The radius (r) is half the diameter of the circle

    • Example: If the radius of a semi-circle is 5 cm, the area would be (1/2) * 3.14 * 5^2 = 39.25 cm^2

  • Answered by AI
Round 2 - HR 

(3 Questions)

  • Q1. Why u want to join this company ?
  • Q2. Why u want to quit Your present company
  • Q3. About my Salary
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Assignment 

About any road ways and types of bridges and classification of is codes for building construction

Round 2 - Group Discussion 

About any road ways and classification of turnouts.

Interview Preparation Tips

Topics to prepare for AECOM Junior Engineer interview:
  • Salary
Interview preparation tips for other job seekers - Going to Job and there have safely. Be careful and keep safe.And be strong and be happy.

B. G. Shirke Construction Technology Interview FAQs

How many rounds are there in B. G. Shirke Construction Technology Junior Engineer Civil interview?
B. G. Shirke Construction Technology interview process usually has 2 rounds. The most common rounds in the B. G. Shirke Construction Technology interview process are Resume Shortlist and Technical.
How to prepare for B. G. Shirke Construction Technology Junior Engineer Civil interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at B. G. Shirke Construction Technology. The most common topics and skills that interviewers at B. G. Shirke Construction Technology expect are Billing, Building Construction, Civil Engineering, Commercial and Construction Engineering.
What are the top questions asked in B. G. Shirke Construction Technology Junior Engineer Civil interview?

Some of the top questions asked at the B. G. Shirke Construction Technology Junior Engineer Civil interview -

  1. What do you know about bar bending schedu...read more
  2. Prepare a bar bending schedule for footin...read more

Tell us how to improve this page.

B. G. Shirke Construction Technology Junior Engineer Civil Salary
based on 317 salaries
₹1.2 L/yr - ₹5 L/yr
At par with the average Junior Engineer Civil Salary in India
View more details

B. G. Shirke Construction Technology Junior Engineer Civil Reviews and Ratings

based on 45 reviews

4.4/5

Rating in categories

4.0

Skill development

3.8

Work-life balance

3.8

Salary

4.5

Job security

4.1

Company culture

3.6

Promotions

3.7

Work satisfaction

Explore 45 Reviews and Ratings
Junior Engineer Civil
317 salaries
unlock blur

₹1.2 L/yr - ₹5 L/yr

Junior Engineer
175 salaries
unlock blur

₹1.7 L/yr - ₹7.1 L/yr

Assistant Engineer
106 salaries
unlock blur

₹3.5 L/yr - ₹8.5 L/yr

Assistant Engineer - Civil
92 salaries
unlock blur

₹3 L/yr - ₹7.1 L/yr

Senior Engineer
81 salaries
unlock blur

₹4.5 L/yr - ₹10 L/yr

Explore more salaries
Compare B. G. Shirke Construction Technology with

L&T Energy Hydrocarbon

3.8
Compare

AECOM

4.2
Compare

Sam Higginbottom Institute of Agriculture, Technology and Sciences

4.1
Compare

Apco Infratech

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview