Add office photos
Filter interviews by
Varaha Infra Structural Engineer Interview Questions and Answers
Varaha Infra Structural Engineer Interview Experiences
2 interviews found
I was interviewed in Jan 2021.
Interview Questionnaire
2 Questions
- Q1. What is your responsibility in civil construction work?
- Q2. What is your qualifications ?
Interview Preparation Tips
I applied via Referral and was interviewed before Aug 2020. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. As a Engineer what you prefer first?
- Q2. Gradient in highway?
- Ans.
Gradient in highway refers to the slope or incline of the road surface.
Gradient is measured in percentage or ratio of rise to run.
It affects the speed and safety of vehicles on the road.
Highway gradients are designed to ensure proper drainage and prevent water accumulation.
Steep gradients may require additional safety measures such as warning signs or speed limits.
Examples of highway gradients include uphill and downhi
- Q3. What is lapping length?
- Ans.
Lapping length is the length of overlap between two reinforcing bars in a concrete structure.
It is necessary to provide lapping length to ensure continuity of reinforcement.
The length of lapping depends on the diameter of the bars and the grade of concrete.
Lapping length is specified in the design drawings or codes.
Improper lapping can lead to structural failure or reduced strength of the structure.
Example: For a 20mm ...
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via campus placement at Birla Institute of Technology and Science (BITS), Pilani and was interviewed in Jul 2024. There were 3 interview rounds.
Social media connecting people
(2 Questions)
- Q1. Timoshenko beam theory
- Q2. Sfd and bmd diagram
- Ans.
Sfd and bmd diagrams show the variation of shear force and bending moment along the length of a structural member.
SFD (Shear Force Diagram) shows the variation of shear force along the length of a beam or structural member.
BMD (Bending Moment Diagram) shows the variation of bending moment along the length of a beam or structural member.
SFD and BMD are essential for analyzing the internal forces and moments in a structu...
(2 Questions)
- Q1. Introduce yourself
- Ans.
I am a structural engineer with 5 years of experience in designing and analyzing buildings and bridges.
Graduated with a degree in Civil Engineering
Worked on various projects including high-rise buildings and pedestrian bridges
Proficient in software such as AutoCAD and SAP2000
- Q2. Preference of job location
- Ans.
I am open to job locations that offer opportunities for growth and development.
I am willing to relocate for the right job opportunity
I prefer job locations with good transportation options
I am open to both urban and rural locations depending on the job requirements
Interview Preparation Tips
Structural Engineer Interview Questions & Answers
McDermott International
Anonymous
posted on 3 Jan 2025
(1 Question)
- Q1. Basics of civil engineering
(2 Questions)
- Q1. What is dual case in finding R value in EQ
- Ans.
Dual case in finding R value in EQ refers to considering both the worst-case scenario and the best-case scenario.
Dual case involves analyzing the structure's response to both maximum and minimum loads.
It helps in determining the range of possible outcomes for the structure.
For example, in seismic design, dual case analysis considers both the maximum and minimum seismic forces that the structure may experience.
- Q2. Why you are shifting your job
Interview Preparation Tips
Structural Engineer Interview Questions & Answers
H.G. Infra Engineering
Anonymous
posted on 15 Sep 2023
Selected
I applied via Job Portal
About Previous experience and some site questions
(1 Question)
- Q1. Civil and Highway Structure related Question
Interview Preparation Tips
Structural Engineer Interview Questions & Answers
Consulting Engineers Group
Anonymous
posted on 10 May 2024
Selected
I applied via Campus Placement and was interviewed before May 2023. There was 1 interview round.
(1 Question)
- Q1. I was shortlisted to the interview through my university. The interview was quite friendly and questions such as basic SFD and BMD were asked, losses of prestress were asked to explain, details about India...
Structural Engineer Interview Questions & Answers
McDermott International
Anonymous
posted on 4 May 2022
I applied via Walk-in and was interviewed before May 2021. There were 2 interview rounds.
(2 Questions)
- Q1. Written technical of 3 questions
- Q2. 1. Find weight and COG of an irrrgular shape. Unit weight of member was given. 2. Calculate force required for COG shift. W load was applied at center of rectangle and we had to calculate forces at all fou...
- Ans.
Interview questions for Structural Engineer
For irregular shape, find volume and multiply by unit weight to get weight. Divide moment of each part by total weight to get COG.
To calculate force required for COG shift, use moment equation. Sum of moments about any point should be equal to zero.
For SFD and BMD, use equations of equilibrium and moment. Draw free body diagram to show all forces acting on the portal.
Understan...
(1 Question)
- Q1. Explain barge and lifting analysis with full procedure. Various lifting factors. Support condition in barge and lifting analysis. Local check of equipment supporting beam.
- Ans.
Barge and lifting analysis involves determining the support conditions and lifting factors for equipment on a barge.
Barge and lifting analysis is used to ensure that equipment on a barge is properly supported and can be safely lifted.
The procedure involves analyzing the support conditions of the barge and the equipment, as well as determining the lifting factors required to safely lift the equipment.
Various factors mus...
Interview Preparation Tips
(2 Questions)
- Q1. Design of base plate
- Ans.
Base plate design involves determining the size, thickness, and material of the plate to support the structural load.
Consider the load requirements and dimensions of the column being supported
Calculate the required thickness and size of the base plate based on the load
Select a suitable material for the base plate, such as steel or concrete
Ensure proper anchorage and connection details for the base plate
- Q2. Roughly draw a base plate connection
- Ans.
A base plate connection is a structural element used to connect a steel column to a concrete foundation.
Base plate connections are typically used in steel structures to transfer loads from the column to the foundation.
The base plate is usually welded to the bottom of the column and anchored to the concrete foundation using anchor bolts.
The base plate connection design must consider factors such as load transfer, bendin...
Structural Engineer Interview Questions & Answers
McDermott International
Anonymous
posted on 10 Nov 2019
I applied via Walk-in and was interviewed in May 2019. There was 1 interview round.
Interview Questionnaire
4 Questions
- Q1. Basic structural behaviour for different type Of loads like BMD and SFD and previous Work experience related questions.
- Q2. Dynamic and static analysis of structure and foundations
- Ans.
Dynamic and static analysis of structures and foundations is essential for ensuring their stability and safety.
Dynamic analysis involves studying the behavior of structures under dynamic loads such as earthquakes or wind.
Static analysis focuses on the response of structures to static loads like gravity or applied forces.
Both analyses help in determining the structural integrity, performance, and design optimization.
Dyn...
- Q3. Knowledge of codes like DNV , American and indian
- Q4. Software used in past projects and SACS learned or not
- Ans.
Yes, I have experience using software such as ETABS, SAP2000, and SAFE. I have also worked with SACS.
I have used ETABS for the design of high-rise buildings
I have used SAP2000 for the analysis of complex structures
I have used SAFE for the design of foundation systems
I have experience working with SACS for offshore structures
Interview Preparation Tips
2) Accept if you don't answer
3) Show attitude that learning keeps you exiating and happy in working
Varaha Infra Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Civil Structural Engineer Interview Questions
- Senior Structural Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Junior Structural Engineer Interview Questions
- Senior Structural Design Engineer Interview Questions
- Structural Engineer Trainee Interview Questions
- Civil Structural Designer Interview Questions
- Structural Steel Detailer Interview Questions
- Show more
People are getting interviews through
Structural Engineer Interview Questions from Similar Companies
Varaha Infra Structural Engineer Reviews and Ratings
based on 2 reviews
Rating in categories
|
Highway Engineer
13
salaries
|  ₹3.3 L/yr - ₹4.8 L/yr |
|
Structural Engineer
10
salaries
| ₹2 L/yr - ₹5.4 L/yr |
|
Executive Accountant
8
salaries
| ₹3 L/yr - ₹3.6 L/yr |
|
Project Manager
8
salaries
| ₹18 L/yr - ₹36.1 L/yr |
|
HR Officer
5
salaries
| ₹2.4 L/yr - ₹2.6 L/yr |
Larsen & Toubro Limited
Tata Projects
GMR Group
Reliance Infrastructure
Calculate your in-hand salary
- Home >
- Interviews >
- Varaha Infra Interview Questions >
- Varaha Infra Structural Engineer Interview Questions
