Add office photos
Filter interviews by
UBC Impex Trainee Design Engineer Interview Questions, Process, and Tips
UBC Impex Trainee Design Engineer Interview Experiences
1 interview found
Ajay Ramagiri
I applied via Referral
Interview Questionnaire
11 Questions
- Q1. What is the difference between doubly reinforced beam and singly reinforced beam ?
- Ans.
Doubly reinforced beam has reinforcement in both tension and compression zones, while singly reinforced beam has reinforcement only in tension zone.
Doubly reinforced beam can withstand higher loads and bending moments.
Singly reinforced beam is simpler and cheaper to construct.
Doubly reinforced beam is used in structures with heavy loads or long spans.
Singly reinforced beam is used in structures with lighter loads or sh...
- Q2. Thin and thick cylinders
- Q3. What is shape factor and different types of beams in steel structures
- Ans.
Shape factor is a measure of the efficiency of a beam's cross-sectional shape in resisting bending. Different types of beams in steel structures include I-beams, H-beams, and C-beams.
Shape factor is calculated by dividing the moment of inertia of the beam's cross-section by the product of the beam's width and the cube of its depth.
I-beams are commonly used in construction due to their high strength-to-weight ratio.
H-be...
- Q4. Slope and deflections of cantilever and simply supported beams subjected to standard loading system
- Ans.
Slope and deflections of cantilever and simply supported beams under standard loading system.
Cantilever beams have fixed support at one end and free at the other.
Simply supported beams have support at both ends.
Standard loading system includes point load, uniformly distributed load, and triangular load.
Slope is the angle of deflection at a point on the beam.
Deflection is the displacement of a point on the beam from its
- Q5. What is point of contraflexure and where does it occurs in various beams
- Ans.
Point of contraflexure is where bending moment changes sign in a beam.
It is the point where bending moment is zero.
It occurs in simply supported beams at the center.
In cantilever beams, it occurs at the fixed end.
In overhanging beams, it occurs at the free end of the overhang.
It is important to consider in beam design to prevent failure.
- Q6. Sfd and bmd of cantilever, simply supported,fixed, continuous beams subjected to standard loads
- Q7. Maximum and minimum percentage of steel in columns
- Ans.
The maximum and minimum percentage of steel in columns depends on various factors such as the type of column, its height, and the load it needs to bear.
The percentage of steel in columns can range from 0.5% to 6% depending on the type of column.
For short columns, the percentage of steel can be as low as 0.5% while for tall columns, it can go up to 6%.
The load that the column needs to bear also plays a crucial role in d...
- Q8. Where do we use doubly reinforced beams
- Ans.
Doubly reinforced beams are used when the depth of the beam is limited and the load-bearing capacity needs to be increased.
Doubly reinforced beams are used in construction where the depth of the beam is limited and the load-bearing capacity needs to be increased
They are commonly used in bridges, high-rise buildings, and parking garages
Doubly reinforced beams have steel reinforcement bars in both the compression and ten...
- Q9. One way shear and two way shear
- Q10. About your projects
- Q11. Minimum percentage of steel in slab
- Ans.
The minimum percentage of steel in a slab depends on various factors such as load, span, and thickness.
The minimum percentage of steel in a slab is generally 0.15% to 0.2% of the cross-sectional area.
The percentage of steel may vary depending on the type of slab, such as one-way or two-way slab.
The thickness of the slab also plays a crucial role in determining the minimum percentage of steel.
The load and span of the sl...
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Anonymous
Selected
I applied via campus placement at Vidya Vardhaka College of Engineering, Mysore and was interviewed in Nov 2024. There were 2 interview rounds.
I am Manohara GC complete my graduation in Vidya vardhaka clg of engineering i know about AutoCAD CATIA and solid edge
"*****" this is mail id please share this link
(5 Questions)
- Q1. What was impact of Accenture?
- Ans.
Accenture has had a significant impact on the design engineering industry, particularly in the areas of technology innovation and digital transformation.
Accenture has helped design engineers leverage advanced technologies such as AI, IoT, and AR/VR to enhance product development processes.
Accenture's expertise in digital transformation has enabled design engineers to streamline operations, improve efficiency, and deliv...
- Q2. May i what to be doing this ur company?
- Ans.
Accenture is a global professional services company that specializes in information technology (IT) services and management consulting. They offer many career paths across different technologies, business areas, and industries.
- Q3. How to build my career?
- Ans.
To build your career as a Design Engineer, focus on gaining relevant education, experience, networking, and continuous learning.
Obtain a degree in engineering or a related field
Gain practical experience through internships or entry-level positions
Build a strong portfolio showcasing your design projects
Network with professionals in the industry and attend design events
Stay updated on the latest design trends and technol
- Q4. How to get the job in your company?
- Ans.
you need to pass Cognitive and Technical assessment. After passing these assessments, you will have to take the Coding Test. After Coding Test, you will have to give communication assessment and then, the Accenture interview round
- Q5. What is main contribute with me?
- Ans.
My main contribution would be my strong design skills and problem-solving abilities.
Strong design skills to create innovative and efficient solutions
Ability to analyze problems and come up with effective design solutions
Experience in using CAD software and other design tools
Collaboration with cross-functional teams to bring designs to life
Interview Preparation Tips
- AutoCAD
- Basic mechanical engineering
- Solid Works
I applied via Walk-in and was interviewed in Dec 2024. There was 1 interview round.
(4 Questions)
- Q1. Introduce yourself
- Q2. Explain your projects
- Q3. Basic hydraulics
- Q4. Materials
(2 Questions)
- Q1. Difference between flip flops and latch
- Ans.
Flip flops and latches are both sequential logic circuits, but flip flops are edge-triggered while latches are level-triggered.
Flip flops are edge-triggered, meaning they change state only on a clock edge.
Latches are level-triggered, meaning they change state as long as the enable signal is active.
Flip flops are more commonly used in synchronous systems for data storage and transfer.
Latches are simpler in design and fa...
- Q2. Difference between verilog and system verilog
- Ans.
Verilog is a hardware description language used for digital circuit design, while SystemVerilog is an extension that adds features for verification and design.
Verilog is used for digital circuit design, while SystemVerilog is used for verification and design
SystemVerilog includes features like classes, randomization, and assertions for verification purposes
Verilog is more focused on describing the behavior of hardware ...
Sajith sk
Selected
(2 Questions)
- Q1. What is stress strain curve
- Ans.
Stress strain curve shows the relationship between stress (force applied) and strain (resulting deformation) in a material.
It is a graphical representation of the behavior of a material under loading.
The curve typically consists of elastic, plastic, and fracture regions.
The slope of the curve in the elastic region is the material's Young's Modulus.
The ultimate tensile strength and yield strength can be determined from ...
- Q2. What is the process of production
- Ans.
The process of production involves converting raw materials into finished products through various stages.
Designing the product based on requirements and specifications
Selecting materials and components needed for production
Manufacturing the product using machinery and tools
Testing and quality control to ensure the product meets standards
Packaging and distribution of the finished product
I applied via Naukri.com and was interviewed in Aug 2024. There were 4 interview rounds.
Kindly arrange the aptitude test is Online mode
(3 Questions)
- Q1. Current work load
- Q2. About the company related work
- Q3. About working experience and current working details
(2 Questions)
- Q1. Family background & privious company background
- Q2. Salary & company policy
Metting with top management
Selected
I applied via Naukri.com and was interviewed in Jul 2024. There were 2 interview rounds.
(3 Questions)
- Q1. What is a Variable Frequency Drive (VFD) and what is its working principle?
- Q2. What is the process for calculating power load?
- Q3. What are MPCB and MCB?
(2 Questions)
- Q1. Can you describe your experience working at your previous company?
- Q2. What are your salary expectations?
Interview Preparation Tips
- Presentation Skills
(2 Questions)
- Q1. What is bgp protocol
- Q2. What is ospf protocol
(2 Questions)
- Q1. Hello, what is ur name, tell me
- Q2. How are you, tell me abt ur self
Interview Preparation Tips
Selected
I applied via Job Portal and was interviewed in Apr 2024. There were 2 interview rounds.
(1 Question)
- Q1. How much is your expectations?
(1 Question)
- Q1. Why Genpact for your carrier?
Interview Preparation Tips
UBC Impex Interview FAQs
Some of the top questions asked at the UBC Impex Trainee Design Engineer interview -
Tell us how to improve this page.
Interview Questions for Popular Designations
- Design Engineer Interview Questions
- Mechanical Engg. Design Interview Questions
- Senior Design Engineer Interview Questions
- Electrical Design Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Piping Designer Interview Questions
- Auto CAD Designer Interview Questions
- Junior Design Engineer Interview Questions
- Show more
Interview Questions from Similar Companies
UBC Impex Trainee Design Engineer Reviews and Ratings
based on 1 review
Rating in categories
TCS
Accenture
Wipro
Cognizant
- Home >
- Interviews >
- UBC Impex Interview Questions >
- UBC Impex Trainee Design Engineer Interview Questions
