Filter interviews by
I applied via Campus Placement
I am a recent graduate with a degree in engineering, eager to learn and grow in a professional setting.
Graduated with a Bachelor's degree in Engineering
Strong problem-solving skills
Experience with internships or projects related to engineering
Motivated to learn and develop new skills
I applied via Campus Placement and was interviewed in Feb 2023. There were 2 interview rounds.
Genaral aptitude test held online , pretty easy to clear
Yes, I am good with Hindi. I can describe my project in Hindi.
मेरे परियोजना का नाम 'ऑटोमेटेड वाहन ट्रैफिक मैनेजमेंट सिस्टम' है।
इस परियोजना का उद्देश्य शहरी ट्रैफिक को सुगम और सुरक्षित बनाना है।
हमने इस परियोजना में वाहनों के लिए स्वचालित सिग्नल सिस्टम विकसित किया है।
यह सिस्टम वाहनों की गति, यातायात दिशा और यातायात दिशा के आधार पर सिग्नल को स्वचालित रूप से नियंत्रित करता है।
I applied via Campus Placement and was interviewed in Jan 2022. There were 2 interview rounds.
Core aptitude MCQs from the particular department
I applied via Campus Placement and was interviewed before Apr 2021. There were 3 interview rounds.
Questions were asked from Reasoning, Quantitative aptitude and English.
This one is a tricky round. A lot of factors come into play like the group in which you are placed, the mood and attentiveness of the evaluator. So what I would suggest to make sure you put your points briefly and do not repeat the points put forward by other members. Start first if you get chance. Also do not forget to invite someone if he/she is not participating actively. This will reflect your team work and mutual understanding. Speak two to three times during the discussion and do not interrupt anyone in the middle. Also avoid direct confrontation. Even if you do not agree with someone keep your views it politely. So thats it all the best!
suzuki motor gujarat interview questions for designations
I applied via Campus Placement and was interviewed before Nov 2020. There were 5 interview rounds.
Top trending discussions
posted on 27 Jun 2017
I appeared for an interview in Jan 2017.
I am a recent graduate with a degree in engineering, eager to learn and contribute to a dynamic team.
Recent graduate with a degree in engineering
Passionate about learning and contributing to a team
Eager to apply theoretical knowledge in practical scenarios
My GPA is 3.8 out of 4.0, reflecting my strong academic performance.
My GPA is 3.8 out of 4.0
It demonstrates my consistent academic excellence
I have excelled in courses such as Engineering Mathematics and Thermodynamics
My final year project was designing and implementing a smart irrigation system using IoT technology.
Developed a system to monitor soil moisture levels and weather conditions in real-time
Implemented automated watering schedules based on data collected
Utilized IoT devices such as sensors and actuators for efficient water usage
Designed a user-friendly interface for remote monitoring and control
Conducted field tests to val
posted on 22 Dec 2021
I applied via Campus Placement and was interviewed in Jun 2021. There were 4 interview rounds.
SCR is a semiconductor device used for controlling high power circuits.
SCR stands for Silicon Control Rectifier.
It is a type of thyristor.
It is used for controlling high power circuits.
It has three terminals: anode, cathode, and gate.
It can be turned on by applying a small voltage to the gate terminal.
Once turned on, it will continue to conduct even if the gate voltage is removed.
It is commonly used in power electronic...
Primary and secondary I and V of transformer are related by the turns ratio.
The primary and secondary currents are inversely proportional to their respective turns ratios.
The primary and secondary voltages are directly proportional to their respective turns ratios.
The turns ratio is the ratio of the number of turns in the primary winding to the number of turns in the secondary winding.
The relationship between primary a...
Logic gates are electronic components that perform logical operations on one or more binary inputs.
They are the building blocks of digital circuits.
There are seven basic types of logic gates: AND, OR, NOT, NAND, NOR, XOR, and XNOR.
Logic gates can be combined to create more complex circuits.
They are used in computer processors, calculators, and other digital devices.
Logic gates operate on binary values, where 0 represen
A flip-flop is a digital circuit that can store one bit of information and has two stable states.
It is used in digital electronics to store binary data.
It has two stable states - SET and RESET.
It can be implemented using logic gates like NAND, NOR, etc.
Types of flip-flops include SR flip-flop, D flip-flop, JK flip-flop, and T flip-flop.
Example: A D flip-flop stores one bit of data and has a single input (D) and two out
A bridge rectifier is an electronic circuit that converts AC to DC voltage using diodes arranged in a bridge configuration.
It is used to convert AC voltage to DC voltage.
It consists of four diodes arranged in a bridge configuration.
The output of a bridge rectifier is a pulsating DC voltage.
It is commonly used in power supplies and battery chargers.
The bridge rectifier is more efficient than a half-wave rectifier.
Exampl...
Temperature in the range of 1000°C can be measured using thermocouples or optical pyrometers.
Thermocouples are made of two different metals that generate a voltage proportional to the temperature difference between the two junctions.
Optical pyrometers measure the intensity of the thermal radiation emitted by the object and convert it into temperature.
Both methods require calibration and consideration of environmental f...
posted on 18 Jun 2022
I applied via Campus Placement and was interviewed in May 2022. There were 3 interview rounds.
Diesel engines are more fuel-efficient and have higher torque, while petrol engines have higher power output and are more refined.
Diesel engines use compression ignition while petrol engines use spark ignition
Diesel engines have a higher compression ratio than petrol engines
Petrol engines have a higher power-to-weight ratio than diesel engines
Diesel engines are more suitable for heavy-duty vehicles while petrol engines...
posted on 19 Oct 2021
Newton's Second law of Motion states that the force acting on an object is directly proportional to its mass and acceleration.
The law is expressed as F = ma, where F is the force, m is the mass, and a is the acceleration.
The direction of the force is the same as the direction of the acceleration.
The law is used to calculate the force required to move an object of a certain mass at a certain acceleration.
Examples includ...
This is Newton's third law of motion which states that for every action, there is an equal and opposite reaction.
The law applies to all objects in motion, including those in the engineering field.
It is important to consider this law when designing structures or machines to ensure they are stable and safe.
Examples include the recoil of a gun after firing, the force exerted on a rocket during liftoff, and the impact of a...
posted on 25 Jan 2022
Force Motors is an Indian automotive company that manufactures commercial vehicles, personal vehicles, and engines.
Founded in 1958 as Bajaj Tempo Limited
Manufactures a range of vehicles including minibuses, vans, SUVs, and tractors
Supplies engines to BMW India for their 3 Series and 5 Series models
Has a joint venture with Rolls-Royce Power Systems to manufacture engines for power generation and rail applications
Headqua
Some of the top questions asked at the suzuki motor gujarat Graduate Engineer Trainee (Get) interview -
based on 4 interviews
Interview experience
based on 8 reviews
Rating in categories
Senior Executive
787
salaries
| ₹4 L/yr - ₹10.3 L/yr |
Junior Manager
712
salaries
| ₹4.9 L/yr - ₹14.8 L/yr |
Executive
622
salaries
| ₹3.2 L/yr - ₹8.5 L/yr |
Assistant Manager
591
salaries
| ₹5.9 L/yr - ₹16.6 L/yr |
Diploma Trainee Engineer
341
salaries
| ₹2.5 L/yr - ₹7.5 L/yr |
Escorts Kubota Limited
Sonalika Tractors
Ola Electric Mobility
Force Motors