Subros DET Operator Interview Questions and Answers

Q1. Glass manufacturing process
Ans. 
Glass manufacturing involves melting raw materials, shaping the molten glass, and cooling it to form the final product.
• Raw materials such as silica sand, soda ash, and limestone are melted in a furnace at high temperatures.

• The molten glass is then shaped using various techniques like blowing, pressing, or drawing.

• The shaped glass is cooled slowly in an annealing oven to relieve internal stresses and strengthen the glas...read more
Answered by AI
View 1 more answer
Q2. Glass inspection process
Add your answer

Q1. What is salary in your company
Add your answer
Q2. Which type experience
Add your answer

Q1. Where did you last work?
Ans. 
I last worked at a marketing agency specializing in digital advertising.
• Worked at a marketing agency

• Specialized in digital advertising
Answered by AI
Add your answer
Q2. How much your experience is?
Ans. 
I have over 5 years of experience in the field.
• 5+ years of experience in the industry

• Extensive knowledge and skills acquired over the years

• Proven track record of successful projects

• Familiarity with industry trends and best practices
Answered by AI
Add your answer

Q1. What is an advantage of mass production?
Ans. 
Mass production allows for lower costs due to economies of scale.
• Lower production costs per unit

• Increased efficiency in production processes

• Ability to meet high demand quickly

• Consistent quality control measures

• Examples: assembly line production in automotive industry, electronics manufacturing
Answered by AI
View 1 more answer
Q2. How to indicate fundamental deviation of hole in BIS system?
Ans. 
Fundamental deviation of hole in BIS system can be indicated by specifying the tolerance zone and the position of the hole.
• Specify the tolerance zone for the hole based on the BIS system standards.

• Measure the actual position of the hole and compare it to the specified tolerance zone.

• If the actual position of the hole falls outside the tolerance zone, indicate it as a fundamental deviation.
Answered by AI
Add your answer

Q1. What mechanism is used to convert linear motion of plunger to rotary motion of pointer in D.T.I?
Ans. 
A rack and pinion mechanism is used to convert linear motion of plunger to rotary motion of pointer in D.T.I.
• Rack and pinion mechanism consists of a gear (pinion) that meshes with a linear gear (rack) to convert linear motion into rotary motion.

• As the plunger moves linearly, it engages with the rack which in turn rotates the pinion, causing the pointer to move.

• This mechanism is commonly used in devices like dial indica...read more
Answered by AI
View 1 more answer

Q1. What is g code
Ans. 
G code is a programming language used to control CNC machines.
• G code is a standardized language used to instruct CNC machines on how to perform specific tasks.

• It consists of letters and numbers that represent different commands and parameters.

• For example, G00 is a rapid move command that tells the machine to move quickly to a specified position.

• G01 is a linear interpolation command that tells the machine to move in a s...read more
Answered by AI
Add your answer
Q2. What is m code
Ans. 
M code is a standard set of machine codes used to control CNC machines.
• M codes are used to activate or deactivate certain functions on a CNC machine.

• They are typically used for tool changes, coolant control, spindle speed, and other machine functions.

• Examples of M codes include M06 for tool change and M08 for coolant on.
Answered by AI
Add your answer

Q1. Haw to give offset
Ans. 
To give offset in CNC machining, adjust the tool position relative to the workpiece.
• Access the offset settings on the CNC machine control panel.

• Enter the desired offset values for length, width, and height adjustments.

• Verify the offset adjustments by running a test program on scrap material.

• Make fine adjustments as needed to achieve the desired machining results.
Answered by AI
Add your answer
Q2. Haw to start cnc
Ans. 
To start a CNC machine, power on the machine, load the program, set the workpiece, and press the start button.
• Power on the CNC machine by flipping the switch

• Load the program into the machine's control panel

• Set the workpiece securely in place on the machine bed

• Press the start button to begin the machining process
Answered by AI
Add your answer

Q1. Basic of company culture
Add your answer
Q2. Work for experience only
Add your answer

Q1. My future goal and myself
Ans. My future goal iss successful business woman and myself my name pooja rawat and I am 21 year dynamic girl I come from uttarakhand and currently aya nagar my educational I have completed intermediate and I am addmission in b.com and proud of my myself
Answered Anonymously
Add your answer
Q2. Any think my life experience
Add your answer
Q3. Any questions of my life experience
Add your answer

G code and m code
Solid works, cad, cam
Fanuc series 21 programming, mazatrol programming

Q1. Family background
Add your answer
Q2. Diploma branch and percentage
Add your answer