i
Spectrum Talent Management
Filter interviews by
I applied via Referral and was interviewed before Jun 2022. There were 2 interview rounds.
Solar panels work by converting sunlight into electricity through photovoltaic cells.
Solar panels absorb sunlight using photovoltaic cells
The photovoltaic cells convert sunlight into direct current (DC) electricity
An inverter then converts the DC electricity into alternating current (AC) electricity for use in homes or businesses
Excess electricity can be stored in batteries or fed back into the grid
Solar panels require...
There are three main types of solar power plants: photovoltaic, concentrated solar power, and solar thermal.
Photovoltaic solar power plants convert sunlight directly into electricity using solar panels.
Concentrated solar power plants use mirrors or lenses to concentrate sunlight onto a small area, which generates heat to produce electricity.
Solar thermal power plants use the sun's heat to generate steam, which drives a
Top trending discussions
I applied via Referral and was interviewed in Nov 2023. There were 3 interview rounds.
I expect a competitive salary based on my experience, skills, and the industry standard.
Research industry standards for site engineer salaries
Consider your level of experience and skills
Be prepared to negotiate based on the job responsibilities and location
I applied via Approached by Company and was interviewed in Mar 2023. There were 2 interview rounds.
TMT stands for Thermo-Mechanically Treated reinforcement bars used in construction.
TMT bars are made by subjecting mild steel bars to a combination of heat treatment and mechanical deformation.
This process imparts greater strength and ductility to the bars, making them ideal for use in construction.
TMT bars are widely used in reinforced concrete structures such as buildings, bridges, and dams.
They offer superior corros...
500D means the yield strength of TMT bars is 500 MPa.
500D is a grade of TMT bars used in construction.
The 'D' stands for ductility, which is the ability of the material to deform without breaking.
The yield strength of 500D TMT bars is 500 MPa.
These bars are commonly used in high-rise buildings, bridges, and other structures that require high strength and durability.
The required steel at the percentage concrete depends on the design and specifications of the structure.
The amount of steel reinforcement needed in concrete is determined by the design and specifications of the structure.
Factors such as the size and shape of the structure, the loads it will bear, and the desired strength and durability of the concrete will all affect the required steel percentage.
The steel percentage c...
Stress is the force applied per unit area, while strain is the deformation caused by stress.
Stress is a measure of the internal forces within a material, while strain is the measure of the deformation of the material.
Stress is expressed in units of force per unit area, while strain is expressed as a ratio of the change in length or shape to the original length or shape.
Stress and strain are related by the material's el...
The stress failure at brick wall can be due to compressive or tensile stress.
Compressive stress failure occurs when the brick wall is unable to withstand the weight or load placed on it.
Tensile stress failure occurs when the brick wall is unable to withstand the forces that pull it apart.
Cracking, bulging, or collapse of the wall can be signs of stress failure.
Reinforcing the wall with steel bars or using thicker brick
White marble is a metamorphic rock composed of recrystallized carbonate minerals, mainly calcite or dolomite.
It is commonly used in construction and sculpture.
It is formed from limestone or dolomite that has undergone heat and pressure.
It is often found in quarries in countries such as Italy, Greece, and India.
Standard coarse sand size ranges from 2.0mm to 4.75mm.
Standard coarse sand is commonly used in construction and civil engineering projects.
It is typically graded between 2.0mm to 4.75mm in size.
This type of sand is often used as a base material for concrete and asphalt.
It can also be used for drainage systems and as a bedding material for pipes.
The size and shape of the sand particles can affect the strength and durabi
I applied via Naukri.com and was interviewed before Jan 2023. There was 1 interview round.
The size of a slump cone is a tool used in concrete testing to measure the consistency of fresh concrete.
The size of a slump cone is typically 12 inches in height.
The base diameter of a slump cone is usually 8 inches.
The top diameter of a slump cone is typically 4 inches.
The size of a slump cone may vary depending on specific testing requirements or standards.
The dimensions of a slump cone are important for accurate me...
To estimate aggregate quantity for a 200sqmt slab, calculate the volume of concrete required and then determine the aggregate quantity based on the mix ratio.
Calculate the volume of concrete required for the slab
Determine the mix ratio of concrete (e.g., 1:2:4)
Calculate the volume of aggregates needed based on the mix ratio
Consider the bulk density of aggregates to convert volume to weight
Account for wastage and add a
Before casting, civil engineers need to check the quality of various elements.
Quality of concrete mix
Quality of reinforcement bars
Quality of formwork
Quality of water used in the mix
Quality of curing process
The number of cubes required for 250 cubic meters of concrete depends on the size of the cubes.
The size of the cubes needs to be specified to determine the number required.
The volume of each cube needs to be calculated.
Divide the total volume of concrete (250 cubic meters) by the volume of each cube to get the number of cubes required.
For example, if the cubes are 1 cubic meter in size, then 250 cubes would be needed.
Post concrete quality inspection involves evaluating the quality of concrete after it has been placed and hardened.
Inspect the concrete for any visible defects such as cracks, honeycombing, or segregation.
Check the concrete strength by conducting compressive strength tests on samples taken from the structure.
Assess the concrete's durability by examining its resistance to factors like freeze-thaw cycles or chemical expo...
I applied via Approached by Company and was interviewed before Jul 2021. There was 1 interview round.
based on 1 interview
Interview experience
Consultant
98
salaries
| ₹1.8 L/yr - ₹4.3 L/yr |
HR Consultant
70
salaries
| ₹2 L/yr - ₹3.6 L/yr |
Senior Consultant
52
salaries
| ₹2.5 L/yr - ₹5.5 L/yr |
HR Recruiter
45
salaries
| ₹1.4 L/yr - ₹3.7 L/yr |
Team Lead
45
salaries
| ₹3 L/yr - ₹6 L/yr |
Team Lease
Quess
Kelly Services
Randstad