Upload Button Icon Add office photos

Filter interviews by

Sekisui Dljm Molding Interview Questions, Process, and Tips for Experienced

Updated 13 Jun 2024

Top Sekisui Dljm Molding Interview Questions and Answers for Experienced

View all 9 questions

Sekisui Dljm Molding Interview Experiences for Experienced

Popular Designations

7 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. About your self
  • Q2. Why you changed your last company
  • Q3. Experience and last company location

Interview Preparation Tips

Topics to prepare for Sekisui Dljm Molding Senior Production Engineer interview:
  • Plastic Injection Molding
  • Materials
  • Process
  • Robotics
  • Core molds
  • MIS
  • PPM
  • Mould knowledge
  • New mold trial
Interview preparation tips for other job seekers - Prepare of him for interview always 24*7*365 days.

Senior Production Engineer Interview Questions asked at other Companies

Q1. What are different IS codes follow to fabricate open web girders?
View answer (1)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. About to Thermocouple Types
  • Q2. How Many Gate in Mould
  • Ans. 

    The number of gates in a mould depends on the design and size of the mould, typically ranging from 1 to 16 or more.

    • Number of gates in a mould can vary based on the complexity of the part being produced.

    • Common numbers of gates include 1, 2, 4, 8, or 16.

    • More gates may be used for larger parts or to ensure even distribution of material.

    • The location of gates is important for proper filling and cooling of the mould.

    • Gate des...

  • Answered by AI
  • Q3. What process of HRTC in a Mould
  • Ans. 

    HRTC (Hot Runner Temperature Controller) is a system used in moulds to control the temperature of the hot runner system.

    • HRTC helps in maintaining consistent temperature in the hot runner system of the mould.

    • It ensures proper flow of molten material and prevents premature solidification.

    • HRTC can be programmed to adjust temperature settings based on the specific requirements of the mould and material being used.

    • Examples ...

  • Answered by AI
  • Q4. What is the Set-up valve Pin
  • Ans. 

    The set-up valve pin is a tool used in the set-up process of machinery to ensure proper alignment and positioning.

    • The set-up valve pin is a precision tool used to align components during the set-up process.

    • It is typically made of hardened steel to withstand wear and tear.

    • The set-up valve pin is inserted into designated holes or slots to ensure accurate positioning of parts.

    • It helps in maintaining the correct alignment ...

  • Answered by AI
  • Q5. How to Polish in Tool
  • Ans. 

    Polishing in tool involves using abrasive materials to remove imperfections and create a smooth surface.

    • Start by selecting the appropriate abrasive material for the type of tool and desired finish

    • Secure the tool in a vice or clamp to prevent movement during polishing

    • Apply the abrasive material to the tool surface using a polishing wheel or by hand

    • Use a consistent pressure and motion to ensure even polishing

    • Inspect the ...

  • Answered by AI

Top Sekisui Dljm Molding Tool Room Technician Interview Questions and Answers

Q1. What process of HRTC in a Mould
View answer (1)

Tool Room Technician Interview Questions asked at other Companies

Q1. What process of HRTC in a Mould
View answer (1)
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Machining working procedure and processes
  • Ans. 

    Machining working procedure and processes involve cutting, shaping, and finishing materials to create a desired product.

    • Machining involves removing material from a workpiece using cutting tools.

    • Common machining processes include turning, milling, drilling, and grinding.

    • Precision is crucial in machining to ensure accurate dimensions and surface finish.

    • CNC machines are commonly used in modern machining operations for inc...

  • Answered by AI
  • Q2. Painting processes

Interview Preparation Tips

Interview preparation tips for other job seekers - This is not good company where person has work with free mind.Suggest not to prefer this company

Assistant General Manager Operations and Plant Head Interview Questions asked at other Companies

Q1. Machining working procedure and processes
View answer (1)
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. About to Process
  • Q2. Process Defects
Round 3 - HR 

(4 Questions)

  • Q1. Personal Details
  • Q2. Salary Discussion
  • Q3. Notice period and joining details
  • Q4. Company Policy like medical facilities etc

Interview Preparation Tips

Interview preparation tips for other job seekers - good

Sekisui Dljm Molding interview questions for popular designations

 Diploma Trainee Engineer

 (2)

 Assistant General Manager Operations and Plant Head

 (1)

 Business Development

 (1)

 Engineer

 (1)

 Junior Engineer

 (1)

 Paint Shop Sr.Engineer

 (1)

 Production DET

 (1)

 Production Engineer

 (1)

I applied via Referral and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(6 Questions)

  • Q1. Tel me about yourself
  • Ans. What is your rol in your company
  • Answered Anonymously
  • Q2. What what things you handle
  • Q3. Do you know about Pareto analysis
  • Ans. 

    Pareto analysis is a problem-solving technique that prioritizes the most important issues to address.

    • It is based on the Pareto principle, which states that 80% of the effects come from 20% of the causes.

    • It involves identifying and ranking the issues based on their frequency and impact.

    • The top 20% of the issues are then addressed first, as they are responsible for the majority of the problems.

    • It is commonly used in qual...

  • Answered by AI
  • Q4. Do you know about 7QC tool
  • Ans. 

    7QC tools are a set of basic quality control tools used to identify and solve quality problems.

    • The tools include: Pareto chart, cause-and-effect diagram, check sheet, control chart, histogram, scatter diagram, and flowchart.

    • They are used to analyze data and identify the root cause of quality problems.

    • The tools are commonly used in Six Sigma and Lean methodologies.

    • For example, a Pareto chart can be used to identify the ...

  • Answered by AI
  • Q5. Do you know about MSA
  • Q6. Explain MSA in own word
  • Ans. 

    MSA stands for Measurement System Analysis. It is a statistical method used to determine the accuracy and precision of a measurement system.

    • MSA helps to identify the sources of variation in a measurement system

    • It involves analyzing the data collected from the measurement system to determine its capability

    • MSA is used to ensure that the measurement system is reliable and can produce accurate results

    • Examples of measuremen...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Sekisui Dljm Molding Senior QA Engineer interview:
  • Technical Support
Interview preparation tips for other job seekers - Smoothly give answer to interviewer
Interviewer see your confidence level
Please don't hesitate at interview time

Senior QA Engineer Interview Questions asked at other Companies

Q1. Combination SumYou are given an array/list ARR of N distinct positive integers. You are also given a non-negative integer B. Your task is to find all unique combinations in the array whose sum is equal to B. A number can be chosen any numbe... read more
View answer (2)

Engineer Interview Questions & Answers

user image Anonymous

posted on 11 Aug 2021

Interview Questionnaire 

1 Question

  • Q1. Why why Analysis,7Qc tool,process and product Audit,SPC, molding defects and its cause, implitations of Qc tool,Nc reports and non concerning, Document work SPC, control plan,WI prepration and correction,F...

Engineer Interview Questions asked at other Companies

Q1. ❖ If a team member is unable to carry out his work, he is doing it repetitively, how would you handle it?, would you like to work only on lifing of components, or would you be ready to shift to other departments?
View answer (5)

Interview Questionnaire 

1 Question

  • Q1. Which type oil use in MTC
  • Ans. 

    The question is unclear and lacks context. MTC could refer to multiple things.

    • More information is needed to answer the question accurately.

    • MTC could refer to a company, a machine, or a type of vehicle.

    • The type of oil used would depend on the specific application and manufacturer's recommendations.

    • Without additional context, it is impossible to provide a definitive answer.

  • Answered by AI

Diploma Trainee Engineer Interview Questions asked at other Companies

Q1. Wich of the following laws states that: in any electrical network the algebraic sum of the current meeting at a poin is zero ?
View answer (6)

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Jul 2020. There were 2 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Proper knowledge of your CV
  • Q2. Basic Questions of Your Work
  • Q3. Mechanical Items
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Tell me about yourself?
  • Q2. What is your salary expectation?
Interview experience
2
Poor
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What is SMPS (switch mode power supply)
  • Ans. 

    SMPS is a power supply that uses high-frequency switching to convert AC voltage to DC voltage.

    • SMPS is more efficient than traditional linear power supplies

    • It uses a switching regulator to control the output voltage

    • SMPS can be found in computers, TVs, and other electronic devices

    • It can be designed to work with different input voltages and frequencies

  • Answered by AI
  • Q2. What is HMI (human machine interface)
  • Ans. 

    HMI is the interface between a human operator and a machine that allows for control and monitoring of the machine's functions.

    • HMI is used in various industries such as manufacturing, transportation, and energy

    • It includes components such as touchscreens, buttons, and indicators

    • HMI can display real-time data and provide alerts for potential issues

    • Examples of HMI include the dashboard in a car and the control panel in a f

  • Answered by AI
  • Q3. What is MTBF and MTTR
  • Ans. 

    MTBF is Mean Time Between Failures and MTTR is Mean Time To Repair.

    • MTBF is the average time between two consecutive failures of a system or component.

    • MTTR is the average time taken to repair a failed system or component.

    • MTBF and MTTR are important metrics in maintenance engineering to measure system reliability and availability.

    • MTBF can be calculated by dividing the total operating time by the number of failures.

    • MTTR c...

  • Answered by AI
  • Q4. How many types of maintenance are there
  • Ans. 

    There are generally 4 types of maintenance: corrective, preventive, predictive, and condition-based.

    • Corrective maintenance involves fixing a problem after it has occurred.

    • Preventive maintenance involves scheduled maintenance to prevent problems from occurring.

    • Predictive maintenance involves using data and analytics to predict when maintenance is needed.

    • Condition-based maintenance involves monitoring equipment and perfo...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for OEN India Maintenance Engineer interview:
  • What is the series connection
Interview preparation tips for other job seekers - Automation Engineering maintenance
Automation department

Skills evaluated in this interview

Sekisui Dljm Molding Interview FAQs

How many rounds are there in Sekisui Dljm Molding interview for experienced candidates?
Sekisui Dljm Molding interview process for experienced candidates usually has 1-2 rounds. The most common rounds in the Sekisui Dljm Molding interview process for experienced candidates are Technical, Resume Shortlist and HR.
What are the top questions asked in Sekisui Dljm Molding interview for experienced candidates?

Some of the top questions asked at the Sekisui Dljm Molding interview for experienced candidates -

  1. Do you know about Pareto analy...read more
  2. Do you know about 7QC t...read more
  3. What process of HRTC in a Mo...read more
How long is the Sekisui Dljm Molding interview process?

The duration of Sekisui Dljm Molding interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

People are getting interviews through

based on 3 Sekisui Dljm Molding interviews
Referral
Job Portal
33%
33%
34% candidates got the interview through other sources.
Moderate Confidence
?
Moderate Confidence means the data is based on a sufficient number of responses received from the candidates

Interview Questions from Similar Companies

UNO Minda Interview Questions
4.0
 • 154 Interviews
Faurecia Interview Questions
3.9
 • 58 Interviews
Rane (Madras) Interview Questions
4.0
 • 31 Interviews
Plastic Omnium Interview Questions
3.7
 • 23 Interviews
View all

Sekisui Dljm Molding Reviews and Ratings

based on 245 reviews

4.0/5

Rating in categories

3.8

Skill development

3.7

Work-Life balance

3.6

Salary & Benefits

3.7

Job Security

3.6

Company culture

3.5

Promotions/Appraisal

3.7

Work Satisfaction

Explore 245 Reviews and Ratings
Engineer
79 salaries
unlock blur

₹2 L/yr - ₹6.3 L/yr

Assistant Manager
58 salaries
unlock blur

₹5.4 L/yr - ₹9 L/yr

Assistant Engineer
56 salaries
unlock blur

₹2 L/yr - ₹4.1 L/yr

Production Engineer
48 salaries
unlock blur

₹2 L/yr - ₹5.6 L/yr

Senior Engineer
47 salaries
unlock blur

₹3.7 L/yr - ₹7.4 L/yr

Explore more salaries
Compare Sekisui Dljm Molding with

Brose India Automotive Systems

3.8
Compare

Plastic Omnium

3.7
Compare

Samvardhana Motherson Group

3.8
Compare

Faurecia

3.9
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview