Rubberwala Housing & Infrastructure Project Manager Interview Questions and Answers for Experienced

Q1. Self introduction
Add your answer
Q2. Experience in the concern field
Add your answer

Q1. They will ask about your previous experience
Add your answer
Q2. Will ask about previous salary
Add your answer

Q1. No competence person during interview process
Add your answer
Q2. Just established new department so no interview
Add your answer

Q1. Salary discussion
Add your answer
Q2. Non technical ompetene person
Add your answer

Q1. Questions related to Project Management and Critical works handled, Float
Add your answer

Q1. Notice period, Salary negotiation, reasons for relocation
Add your answer

Q1. Total Qty of steel in OHT.
Ans. 
The total quantity of steel in OHT is calculated by summing up the individual quantities of steel used in the construction.
• Calculate the quantity of steel used in each component of the OHT (e.g. beams, columns, slabs, etc.)

• Sum up the individual quantities to get the total quantity of steel in OHT

• Consider any additional steel reinforcements or accessories used in the construction
Answered by AI
Add your answer
Q2. But fusion joint for pipeline
Ans. 
Fusion joint is a method used to join pipes in a pipeline by heating the ends and pressing them together to create a strong bond.
• Fusion joint involves heating the ends of the pipes to a specific temperature

• The heated ends are then pressed together to form a strong bond

• This method is commonly used in industries like oil and gas for pipeline construction
Answered by AI
Add your answer

Q1. Project Monitoring, scheduling Analyze projects, budget, cash flow, coordination with contractors, Consultant and allied services, construction, resource management, quality control and quality assurance, ...read more
Add your answer

Already talked to you

Q1. Two types of pavent 1:- Flexible pavement 2:-rigid pavement Types of progect 1:- New progect 2:- Realigment of road
Ans. 
Flexible pavement and rigid pavement are two types of pavements used in different types of road projects.
• Flexible pavement is made of multiple layers of materials that can flex under traffic loads.

• Rigid pavement is made of a single layer of concrete or asphalt that is rigid and does not flex.

• New projects involve constructing roads from scratch, while realignment projects involve changing the alignment of existing roads...read more
Answered by AI
View 2 more amswers
Q2. Constrution process:- surveying, enchrochment ,NGL, OGL
View 3 more amswers
Q3. Flexibile road :- 1:- Embankment as per site now taken thickness 3M , Large size of soil particles75mm lumps& cloud , liquid index<50% , plastic limit <25% , Swelling &shrinkage <50% , effective cbr as per...read more
Add your answer
Q4. 3:- confinement layer or new blanket
Add your answer
Q5. 4:- WMM:- It is mixture of aggregate and binding material, aggregate size4.75mm to 20mm. Binding material used stone dust ,morum,flyash, total compacted 300mm. Two layer 150mm &150mm. It is mix in pre mix...read more
Add your answer
Q6. (a) Prime coat:- low viscous cut back bitumen on wmm surface area fil up pores and void. (b) Tack coat:- Light application bitumen, ashphalt,emulsion,and dilute water applied on the prim coat.
Ans. 
The question describes the application of prime coat and tack coat on a WMM surface.
• Prime coat is a low viscous cut back bitumen used to fill up pores and voids on a WMM surface.

• Tack coat is a light application of bitumen, asphalt, emulsion, or dilute water applied on the prime coat.

• The purpose of the prime coat is to bond the WMM surface with the subsequent layers of asphalt.

• The tack coat helps in providing a strong b...read more
Answered by AI
Add your answer
Q7. 5 :- DBM:- It is total thickness 150mm. Compacted in two layer 100mm & 50mm Aggregate size 20mm to 28mm ,bitumen viscous grade VG30 grade bitumen mixture.
Add your answer
Q8. Tack coat :- light application bitumen ,Asphalt, emulsion,and diluted water on the surface area of DBM.
Add your answer
Q9. 6:- BC :- It is total thicness 50 mm compacted. It is mixture of aggregate size 13.1mm bitumen VG30 grade viscous.
Add your answer
Q10. 7:- Seal :- 6mm to 8mm thickness grvel or coarse sand mix with bitumen on BC course .provided camber on flexble pavement 1in 40 to 1in 40.
Add your answer
Q11. RIGID PAVEMENT :- All the process of embankment to GSB is same. DLC:- Specification 1 :- Aggregate size 26.5 mm 2:-water absorption<2% 3 :- soundness test :- Naso4 12% ...read more
Add your answer
Q12. DESIGIN PROCEDURE :- DLC thickness 150mm. 1:- use M15 grade concrete,max aggregate cement ratio 12:1 2:-The minimum cement content 150kg per cum. If flayash is more than >20% the mini.mum cement content. ...read more
Ans. 
Design procedure for 150mm DLC thickness using M15 grade concrete with specific requirements for cement content, testing, mixing, transportation, compaction, and curing.
• Use M15 grade concrete with maximum aggregate cement ratio of 12:1

• Minimum cement content of 150kg per cum, or 120kg per cum if flyash is more than 20%

• Perform 5 sample cube test after 7 day curing with strength of 10 MPA, and 1 sample cube test after 7 d...read more
Answered by AI
View 2 more amswers
Q13. PQC:- TOTAL THICKNESS 300MM Aggregate size 31.5mm. All specificition is same as DLC.
Add your answer
Q14. Design procedure :- 1 :- The minimum cement content 360 kg per cum.if the fly ash is more than 20% the minimum cement content 310 kg per cum. 2 :-The flexure strength of cement concrete after 28 days cur...read more
Ans. 
Design procedure for Senior Project Manager role including cement content, strength, joint design, and surface finishing.
• Minimum cement content of 360 kg per cum, or 310 kg per cum if fly ash is more than 20%

• Flexure strength of cement concrete after 28 days curing is 4.5 MPA

• Compressive strength of cement concrete after 28 days curing is 40 MPA

• Dowel bar provided for expansion joint vehicle load transfer between slabs

• Tie...read more
Answered by AI
Add your answer
Q15. CBR:- Developed by calforina division state highway to classiy soil sub grade &GSB CBR=3%-25% CLAY<8% SAND 15% -35% GRAVEL>25% THICKNESS OF PAVEMENT T=( 1.75P/CBR - A/3.14)
Add your answer

Q1. Base practices in ASPICE
Add your answer
Q2. Scope management and schedule
Add your answer