Add office photos
Filter interviews by
Rij Engineering Interview Questions and Answers for Experienced
Rij Engineering Interview Experiences for Experienced
4 interviews found
I applied via Referral and was interviewed before Jan 2023. There was 1 interview round.
(2 Questions)
- Q1. What is the torsion
- Ans.
Torsion is the twisting or rotational deformation of an object due to the application of torque.
Torsion occurs when a force is applied to an object causing it to twist or rotate.
It is commonly observed in structures such as beams, shafts, and springs.
Torsional deformation can be calculated using the formula T = kθ, where T is the torque, k is the torsional stiffness, and θ is the angle of twist.
Torsion can have both be...
- Q2. What will be the effects of runout on ⚙️
- Ans.
Runout can cause misalignment, vibration, and reduced performance of ⚙️
Runout refers to the deviation of a rotating component from its intended axis of rotation
It can lead to misalignment of gears, resulting in inefficient power transmission
Runout can cause vibration, noise, and premature wear of gears
It can also lead to reduced performance and decreased lifespan of the ⚙️
Examples of runout effects include gear teeth d...
Interview Preparation Tips
Senior Engineer Interview Questions asked at other Companies
Interview Questionnaire
1 Question
- Q1. Gear manufacturing process, machines, TIN, Module, Standards
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. Releted EHS
EHS Supervisor Interview Questions asked at other Companies
Interview Questionnaire
3 Questions
- Q1. Job profile related
- Q2. SAP Related
- Q3. Store activity
Rij Engineering interview questions for popular designations
Top trending discussions
Interview questions from similar companies
Selected
I applied via Recruitment Consulltant and was interviewed in Jul 2024. There were 2 interview rounds.
(4 Questions)
- Q1. What is limit switch.
- Ans.
A limit switch is a device that is used to detect the presence or absence of an object within a certain range of motion.
Limit switches are commonly used in industrial applications to control machinery and equipment.
They consist of an actuator that is mechanically linked to a set of contacts, which are opened or closed depending on the position of the actuator.
Limit switches can be used to stop the motion of a machine w...
- Q2. Types of cooling use in dies.
- Ans.
Types of cooling used in dies include water cooling, air cooling, and oil cooling.
Water cooling: uses water to remove heat from the die
Air cooling: uses air to cool the die
Oil cooling: uses oil to dissipate heat from the die
- Q3. Material and hrc of die parts.
- Ans.
Material and hrc of die parts are crucial for determining the durability and performance of the parts.
Material selection for die parts depends on factors like strength, wear resistance, and thermal conductivity.
Common materials used for die parts include tool steels like H13, D2, and A2.
Hardness of die parts is typically measured using Rockwell Hardness Scale (HRC).
Higher HRC values indicate greater hardness and wear r...
- Q4. What type of breakdown in dies on machine.
- Ans.
Breakdown in dies on machine can be due to wear and tear, misalignment, overheating, or material defects.
Wear and tear from continuous use can lead to cracks or breakage in the dies.
Misalignment of the dies can cause them to wear unevenly or break prematurely.
Overheating of the dies can weaken their structure and lead to failure during operation.
Material defects in the dies, such as impurities or weak spots, can cause ...
(3 Questions)
- Q1. Introduction and family background.
- Q2. Do you now anyone in Ahresty.
- Q3. Salary discussion.
Interview Preparation Tips
(2 Questions)
- Q1. About experience
- Q2. About product development
(2 Questions)
- Q1. Product specification
- Q2. Product development
Interview Preparation Tips
Dispatch Officer Interview Questions & Answers
GKN Sinter Metals
Sagar Rajaram Rathod
posted on 18 Jun 2024
Selected
I was interviewed in May 2024.
(2 Questions)
- Q1. Tell me about Excel? What formulas you used?
- Ans.
Excel is a spreadsheet program used for data organization and analysis. Commonly used formulas include SUM, VLOOKUP, and IF.
Excel is a powerful tool for organizing and analyzing data
Commonly used formulas include SUM, VLOOKUP, and IF
SUM formula is used to add up numbers in a range, e.g. =SUM(A1:A10)
VLOOKUP formula is used to search for a value in a table, e.g. =VLOOKUP(A2, B1:C10, 2, FALSE)
IF formula is used for condit
- Q2. In export documents what are drawbacks of RoDTEP?
- Ans.
RoDTEP does not cover all export products, leading to potential drawbacks in export documents.
RoDTEP does not cover all export products, leaving some products ineligible for benefits.
The rates under RoDTEP may not fully offset the taxes/duties paid on inputs for export products.
There may be delays in processing RoDTEP claims, affecting cash flow for exporters.
Exporters need to carefully track and document RoDTEP benefi...
Interview Preparation Tips
Skills evaluated in this interview
(4 Questions)
- Q1. Based on experience.
- Q2. Recruitment steps
- Q3. Training procedure
- Ans.
Training procedure involves identifying training needs, designing training programs, delivering training sessions, and evaluating training effectiveness.
Identify training needs by conducting a training needs assessment
Design training programs based on identified needs and learning objectives
Deliver training sessions using various methods such as lectures, workshops, simulations, etc.
Evaluate training effectiveness thro...
- Q4. R&R policies & your role
(1 Question)
- Q1. General based on experience.
Selected
I applied via Approached by Company and was interviewed in Jul 2023. There were 5 interview rounds.
(4 Questions)
- Q1. Previous Company Roles & Responsibilities
- Q2. Problem Solving Tools
- Q3. Any of Problem Solved in previous Jobs
- Q4. Welding Basics focusing on Penetration & Testing Procedure
(5 Questions)
- Q1. Supplier Audit criteria
- Ans.
Supplier audit criteria are standards used to evaluate the performance and capabilities of suppliers.
Quality management system compliance
Product quality and consistency
Delivery performance and reliability
Cost competitiveness
Ethical and sustainability practices
Risk management and contingency planning
- Q2. Supplier Rating Criteria
- Ans.
Supplier rating criteria are the standards used to evaluate and assess the performance of suppliers.
Quality of products or services provided
On-time delivery performance
Cost competitiveness
Communication and responsiveness
Compliance with regulations and standards
Overall relationship and partnership with the supplier
- Q3. Inspection Standards & Procedures
- Q4. PPAP Basics & More focusing on MSA
- Q5. Worst Supplier upgradation Plan
- Ans.
The worst supplier upgradation plan involved lack of communication, poor quality control, and missed deadlines.
Lack of communication between supplier and company
Poor quality control resulting in defective products
Missed deadlines causing delays in production
Failure to meet agreed upon terms and conditions
Inadequate support and assistance from supplier
(1 Question)
- Q1. Previous Round repeat questions
(2 Questions)
- Q1. More Challenge in EV why interested in EV
- Q2. Future of EV & Why I want to join OKINAWA
Maintenance Engineer Interview Questions & Answers
Rheinmetall Automotive
Anonymous
posted on 28 Jun 2021
Selected
I applied via Naukri.com and was interviewed before Jun 2020. There were 2 interview rounds.
Interview Questionnaire
1 Question
- Q1. About family background About education journey About job responsibilities
Interview Preparation Tips
- Plc programming
- Auto Cadd
- IT Skills
- CNC Programming
Rij Engineering Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
People are getting interviews through
Interview Questions from Similar Companies
Rij Engineering Reviews and Ratings
based on 78 reviews
Rating in categories
|
Quality Engineer
37
salaries
|  ₹1.8 L/yr - ₹4.5 L/yr |
|
Production Engineer
23
salaries
| ₹1.8 L/yr - ₹3.6 L/yr |
|
Graduate Engineer Trainee (Get)
7
salaries
| ₹1.8 L/yr - ₹2.5 L/yr |
|
Quality Inspector
7
salaries
| ₹2.2 L/yr - ₹2.8 L/yr |
|
Assistant Manager
6
salaries
| ₹5.5 L/yr - ₹8 L/yr |
Marelli
Enco Engineers Combine
Seoyon E-hwa Automotive
Maxxis Rubber
Calculate your in-hand salary
- Home >
- Interviews >
- Rij Engineering Interview Questions >
- Rij Engineering Interview Questions for Experienced
