Filter interviews by
I applied via Referral and was interviewed before Jan 2023. There was 1 interview round.
Torsion is the twisting or rotational deformation of an object due to the application of torque.
Torsion occurs when a force is applied to an object causing it to twist or rotate.
It is commonly observed in structures such as beams, shafts, and springs.
Torsional deformation can be calculated using the formula T = kθ, where T is the torque, k is the torsional stiffness, and θ is the angle of twist.
Torsion can have both be...
Runout can cause misalignment, vibration, and reduced performance of ⚙️
Runout refers to the deviation of a rotating component from its intended axis of rotation
It can lead to misalignment of gears, resulting in inefficient power transmission
Runout can cause vibration, noise, and premature wear of gears
It can also lead to reduced performance and decreased lifespan of the ⚙️
Examples of runout effects include gear teeth d...
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There were 3 interview rounds.
Startup code sequence refers to the order in which code is executed when a program is launched.
Startup code sequence typically involves initializing variables, setting up memory, and executing any necessary setup functions.
Examples of startup code sequence include setting up hardware registers in embedded systems, initializing global variables in C programs, and loading configuration files in web applications.
Yes, I am willing to work on weekends if necessary to meet project deadlines or address urgent issues.
I understand that sometimes working on weekends may be required in order to meet project deadlines or address urgent issues.
I am committed to delivering high-quality work and am willing to put in extra hours when needed.
I am flexible with my schedule and can adjust my plans to accommodate weekend work if necessary.
I will address conflicts by promoting open communication, active listening, and facilitating constructive discussions.
Encourage open communication among team members to address conflicts early on
Practice active listening to understand all perspectives involved
Facilitate constructive discussions to find mutually beneficial solutions
Establish clear team norms and guidelines for conflict resolution
Seek input from team mem...
Seeking new challenges and opportunities for growth in a more innovative and dynamic environment.
Looking for new challenges and opportunities for growth
Interested in working in a more innovative and dynamic environment
Seeking career advancement and professional development
Seeking new challenges and opportunities for growth in a different environment.
Looking for new challenges and opportunities for growth
Interested in working with different technologies or industries
Seeking a better work-life balance or company culture
Wanting to expand skill set or take on more responsibilities
Relocation to a new area
posted on 17 Jan 2024
I was interviewed in Dec 2023.
Reasoning, enlish , appitude
I was interviewed in Mar 2023.
I applied via Recruitment Consulltant and was interviewed in Jul 2024. There were 2 interview rounds.
A limit switch is a device that is used to detect the presence or absence of an object within a certain range of motion.
Limit switches are commonly used in industrial applications to control machinery and equipment.
They consist of an actuator that is mechanically linked to a set of contacts, which are opened or closed depending on the position of the actuator.
Limit switches can be used to stop the motion of a machine w...
Types of cooling used in dies include water cooling, air cooling, and oil cooling.
Water cooling: uses water to remove heat from the die
Air cooling: uses air to cool the die
Oil cooling: uses oil to dissipate heat from the die
Material and hrc of die parts are crucial for determining the durability and performance of the parts.
Material selection for die parts depends on factors like strength, wear resistance, and thermal conductivity.
Common materials used for die parts include tool steels like H13, D2, and A2.
Hardness of die parts is typically measured using Rockwell Hardness Scale (HRC).
Higher HRC values indicate greater hardness and wear r...
Breakdown in dies on machine can be due to wear and tear, misalignment, overheating, or material defects.
Wear and tear from continuous use can lead to cracks or breakage in the dies.
Misalignment of the dies can cause them to wear unevenly or break prematurely.
Overheating of the dies can weaken their structure and lead to failure during operation.
Material defects in the dies, such as impurities or weak spots, can cause ...
posted on 26 Oct 2024
I applied via Approached by Company and was interviewed in Sep 2024. There was 1 interview round.
I applied via Referral and was interviewed in Nov 2023. There was 1 interview round.
The 7 QC tools are a set of basic tools used for quality control and problem-solving in manufacturing and service industries.
Check sheet: Used to collect and organize data in a systematic way.
Pareto chart: Helps identify the most significant factors contributing to a problem.
Cause and effect diagram (Fishbone diagram): Used to identify and analyze potential causes of a problem.
Histogram: A graphical representation of d...
The six big losses in quality refer to specific areas where efficiency and productivity can be improved in a manufacturing process.
1. Downtime - time when production is stopped due to issues like equipment breakdowns or changeovers
2. Speed loss - inefficiencies that slow down the production process
3. Defects - products that do not meet quality standards and need to be reworked or scrapped
4. Setup and adjustment - time ...
PPAP stands for Production Part Approval Process, a standardized process in the automotive industry to ensure suppliers meet quality standards.
PPAP is a set of documents and procedures used to demonstrate that a supplier can consistently meet customer requirements.
It includes documentation such as control plans, process flow diagrams, and inspection records.
PPAP is typically required by automotive manufacturers before ...
ISO 9001 and IATF 16949 are two important quality management system standards.
ISO 9001 focuses on general quality management principles and practices.
IATF 16949 is specific to the automotive industry and includes additional requirements.
Both standards emphasize the importance of customer satisfaction, continual improvement, and risk-based thinking.
I am aware of the raw material details such as supplier information, specifications, quality standards, and testing procedures.
Supplier information including contact details and location
Raw material specifications such as composition, dimensions, and tolerances
Quality standards and certifications required for raw materials
Testing procedures for raw materials to ensure quality and compliance
I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 2 interview rounds.
posted on 31 Oct 2023
Based on below points-
1. Embedded Basics and Protocol- SPI, UART, CAN
2. C Programming
3. Projects
posted on 8 Dec 2023
Bearings are mechanical components that allow for smooth rotation or movement between two parts.
Types of bearings include ball bearings, roller bearings, plain bearings, and fluid bearings.
Ball bearings use balls to reduce friction between two surfaces.
Roller bearings use cylindrical rollers to support radial and axial loads.
Plain bearings have a simple design with no rolling elements.
Fluid bearings use a thin layer of
ID can be measured by observing the bearing of an object in relation to a known point.
Use a compass to determine the bearing of the object from the known point.
Measure the angle between the direction of the object and the known point.
Calculate the ID using trigonometry based on the angle and the distance between the object and the known point.
Quality Engineer
37
salaries
| ₹1.8 L/yr - ₹4.5 L/yr |
Production Engineer
23
salaries
| ₹1.8 L/yr - ₹3.6 L/yr |
Graduate Engineer Trainee (Get)
7
salaries
| ₹1.8 L/yr - ₹2.5 L/yr |
Quality Inspector
7
salaries
| ₹2.2 L/yr - ₹2.8 L/yr |
Assistant Manager
6
salaries
| ₹5.5 L/yr - ₹8 L/yr |
Marelli
Enco Engineers Combine
Seoyon E-hwa Automotive
Maxxis Rubber