Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Raymond Lifestyle Limited Team. If you also belong to the team, you can get access from here

Raymond Lifestyle Limited Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Raymond Lifestyle Limited Production Graduate Engineer Trainee Interview Questions and Answers

Updated 5 Jun 2024

Raymond Lifestyle Limited Production Graduate Engineer Trainee Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Not Selected
Round 1 - One-on-one 

(1 Question)

  • Q1. About textile calculation
Round 2 - One-on-one 

(1 Question)

  • Q1. About textile calculation

Interview Preparation Tips

Interview preparation tips for other job seekers - Study hard and clam
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Reasoning, apptitude round

Round 3 - Technical 

(1 Question)

  • Q1. Technical qustion from spinning, weaving

Production Graduate Engineer Trainee Interview Questions Asked at Other Companies

Q1. PRINCIPLE ON WHICH HEAT TRANSFER WORKS (ALL PHASES)
asked in Veolia
Q2. 1-what is your favorite topic 2-third law of thermodynamics 3- mo ... read more
asked in Wood Group
Q3. Which flow system is more effective: countercurrent flow or concu ... read more
Q4. METHODS TO FIND NUMBER OF PLATES IN DISTILLATION COLUMN
Q5. What are the details of the manufacturing process of internal com ... read more

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Altitude and core test first after that interview round

Round 3 - One-on-one 

(1 Question)

  • Q1. Tell me about urself? Some other core question?
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Aptitude Test 

It was easy aptitude and core test

Round 2 - Technical 

(1 Question)

  • Q1. What is spectrometer
  • Ans. 

    A spectrometer is a scientific instrument used to measure properties of light over a specific portion of the electromagnetic spectrum.

    • Spectrometers can be used to analyze the chemical composition of materials based on how they interact with light.

    • They are commonly used in various fields such as chemistry, physics, astronomy, and environmental science.

    • Examples of spectrometers include UV-Vis spectrometers, infrared spec

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Where do you live and father's profession
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is quenching, normalising and properties of martensite
  • Ans. 

    Quenching, normalising, and properties of martensite are heat treatment processes used to alter the properties of metals.

    • Quenching is a rapid cooling process used to harden metals by trapping the atoms in a specific crystalline structure.

    • Normalising is a slower cooling process used to refine the grain structure of metals, improving their toughness and ductility.

    • Martensite is a hard, brittle phase of steel formed by que...

  • Answered by AI
  • Q2. What is melting point of plain steel
  • Ans. 

    The melting point of plain steel is approximately 2,500 degrees Fahrenheit.

    • Melting point of plain steel can vary depending on the specific composition of the steel.

    • Generally, plain carbon steel melts at around 2,500 degrees Fahrenheit.

    • Alloy steels may have different melting points due to the addition of other elements.

    • Melting point can also be affected by the rate of heating and cooling.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Read about company recent projects
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Good experience and easy

Round 2 - Technical 

(1 Question)

  • Q1. About projects and CV
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed before Aug 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. M.Tech Thesis in Depth questions
  • Q2. Haet Transfer and Mass Transfer questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Heat, Mass And fluid mechanics
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Oct 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Time distance, time speed

Round 2 - Technical 

(5 Questions)

  • Q1. Explain performance curves of centrifugal pump
  • Ans. 

    Performance curves of centrifugal pump show the relationship between flow rate, head, and efficiency.

    • Performance curves show how a pump performs at different flow rates and heads.

    • The curve typically includes lines for efficiency, power consumption, and NPSH requirements.

    • The shape of the curve can indicate the pump's operating range and efficiency.

    • Operating a pump outside of its recommended range can lead to issues like

  • Answered by AI
  • Q2. Explain best efficency point of centrifugal pump
  • Ans. 

    The best efficiency point of a centrifugal pump is the operating point where the pump achieves the highest efficiency.

    • The best efficiency point is typically located near the pump's BEP (Best Efficiency Point) on the pump curve.

    • At the best efficiency point, the pump operates with the least amount of energy consumption and highest output.

    • Operating the pump away from the best efficiency point can lead to decreased efficie...

  • Answered by AI
  • Q3. Explain joule Thomson effect
  • Ans. 

    Joule Thomson effect is the change in temperature of a gas when it is allowed to expand without performing work.

    • Occurs when a gas expands through a valve or porous plug

    • No external work is done on or by the gas

    • Temperature change depends on the gas properties and initial conditions

    • Used in natural gas processing to cool the gas for further processing

  • Answered by AI
  • Q4. Explain iron carbon phase diagram
  • Ans. 

    Iron carbon phase diagram shows the phases of iron and carbon at different temperatures and compositions.

    • Shows the phases of iron and carbon at different temperatures and compositions

    • Consists of regions for austenite, ferrite, cementite, and pearlite

    • Helps in understanding the microstructure of steel

    • Critical points like eutectic point and eutectoid point are important

    • Used in heat treatment processes to control the prope

  • Answered by AI
  • Q5. Explain series and parallel operation of pumps
  • Ans. 

    Series and parallel operation of pumps involve connecting multiple pumps together to achieve desired flow rates and pressures.

    • In series operation, pumps are connected one after the other to increase the total head or pressure that the system can deliver.

    • In parallel operation, pumps are connected side by side to increase the total flow rate that the system can deliver.

    • Series operation is used when high pressure is requi...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Study fluid mechanics and dynamics
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Mar 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Not that difficult questions

Round 2 - Technical 

(2 Questions)

  • Q1. Yarn spinning and it's types
  • Ans. 

    Yarn spinning is the process of creating yarn from fibers. Types include ring spinning, open-end spinning, and friction spinning.

    • Yarn spinning is the process of twisting fibers together to create a continuous strand of yarn.

    • Ring spinning is a traditional method where the yarn is twisted and wound onto a bobbin.

    • Open-end spinning is a newer method where fibers are twisted together using air jets.

    • Friction spinning involve...

  • Answered by AI
  • Q2. Project and internship
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

About basic information about subject

Round 2 - Technical 

(1 Question)

  • Q1. Why do you join RIL
Contribute & help others!
anonymous
You can choose to be anonymous

Raymond Lifestyle Limited Interview FAQs

How many rounds are there in Raymond Lifestyle Limited Production Graduate Engineer Trainee interview?
Raymond Lifestyle Limited interview process usually has 2-3 rounds. The most common rounds in the Raymond Lifestyle Limited interview process are One-on-one Round, Technical and Resume Shortlist.
What are the top questions asked in Raymond Lifestyle Limited Production Graduate Engineer Trainee interview?

Some of the top questions asked at the Raymond Lifestyle Limited Production Graduate Engineer Trainee interview -

  1. Technical qustion from spinning, weav...read more
  2. About textile calculat...read more

Recently Viewed

INTERVIEWS

Aditya Birla Fashion and Retail

No Interviews

INTERVIEWS

Raymond Lifestyle Limited

No Interviews

INTERVIEWS

Fabindia

5.6k top interview questions

INTERVIEWS

Biofourmis

No Interviews

INTERVIEWS

Biofourmis

No Interviews

INTERVIEWS

RS Software (India) Ltd.

No Interviews

DESIGNATION

LIST OF COMPANIES

United Colors of Benetton

Locations

INTERVIEWS

Biofourmis

No Interviews

INTERVIEWS

Biofourmis

No Interviews

Tell us how to improve this page.

Raymond Lifestyle Limited Production Graduate Engineer Trainee Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 822 Interviews
ITC Interview Questions
3.9
 • 548 Interviews
Britannia Interview Questions
4.0
 • 164 Interviews
Titan Company Interview Questions
4.3
 • 150 Interviews
Trident Group Interview Questions
3.6
 • 118 Interviews
H&M Interview Questions
3.9
 • 87 Interviews
Relaxo Footwear Interview Questions
4.1
 • 82 Interviews
View all
Assistant Manager
320 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
229 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Area Sales Manager
218 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Store Manager
196 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
170 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Raymond Lifestyle Limited with

Arvind Group

4.0
Compare

Aditya Birla Fashion and Retail

4.1
Compare

Bombay Dyeing

3.8
Compare

Fabindia

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview