Upload Button Icon Add office photos

Wood Group

Compare button icon Compare button icon Compare

Filter interviews by

Wood Group Production Graduate Engineer Trainee Interview Questions and Answers

Updated 19 Dec 2024

Wood Group Production Graduate Engineer Trainee Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Simple aptitude questions

Round 2 - Group Discussion 

This is a shortlisting round, and many technically knowledgeable individuals did not qualify for this stage.

Round 3 - Technical 

(2 Questions)

  • Q1. Which flow system is more effective: countercurrent flow or concurrent flow, and what are the reasons for this?
  • Ans. 

    Countercurrent flow is more effective due to increased concentration gradient and better utilization of resources.

    • Countercurrent flow allows for a greater concentration gradient between the two fluids, leading to more efficient mass transfer.

    • Countercurrent flow also allows for better utilization of resources as the fluids are in contact for a longer period of time.

    • Concurrent flow, on the other hand, results in a lower ...

  • Answered by AI
  • Q2. What is the procedure for designing a heat exchanger?
  • Ans. 

    The procedure for designing a heat exchanger involves determining heat transfer requirements, selecting appropriate materials, designing the geometry, and analyzing performance.

    • Determine the heat transfer requirements based on the fluids involved, flow rates, temperatures, and desired heat transfer rate.

    • Select appropriate materials for the heat exchanger based on compatibility with the fluids, operating conditions, and...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and possess fundamental technical knowledge.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. I want to know about the company
  • Q2. Stress related content
  • Q3. Piping layout related content
Round 2 - Group Discussion 

Renewable resources speak atleast 20 minutes

Interview Preparation Tips

Topics to prepare for McDermott International Production Graduate Engineer Trainee interview:
  • Stress Analysis
Interview preparation tips for other job seekers - Vocal about the company and put forward your ability
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. About yourself and simple mechanical basics
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-

I applied via Referral and was interviewed before Feb 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Describe what work you have done so far

Interview Preparation Tips

Interview preparation tips for other job seekers - focus on communication skills and confidence while answering questions
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement and was interviewed in Nov 2024. There were 3 interview rounds.

Round 1 - Group Discussion 

Topic : How AI influences engineering life

Round 2 - Technical 

(3 Questions)

  • Q1. About steel structural construction
  • Q2. About risk and mitigation
  • Q3. Sub sea pipeline design
Round 3 - HR 

(3 Questions)

  • Q1. Tell me about your self
  • Ans. 

    I am a recent graduate with a degree in Mechanical Engineering and a passion for problem-solving and innovation.

    • Recent graduate with a degree in Mechanical Engineering

    • Passionate about problem-solving and innovation

    • Experience with CAD software such as SolidWorks

    • Completed internships at engineering firms

  • Answered by AI
  • Q2. What do you expect from company
  • Q3. Where do you see yourself in 5 years

Interview Preparation Tips

Interview preparation tips for other job seekers - Answer for what they've asked don't prolong it
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Have Group discussion after written test and face to face interview

Round 3 - One-on-one 

(1 Question)

  • Q1. After Group Discussion
Round 4 - Technical 

(1 Question)

  • Q1. With Discipline manager and subject matter extert

Interview Preparation Tips

Topics to prepare for McDermott International Associate Engineer interview:
  • Written test
Interview preparation tips for other job seekers - Good experience, candidate were taken care , from food to safety of us. Manager and HR were very polite and explained the process clearly and guided us .
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Sep 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Wat is permeability, porosity,tell me about yourself
  • Q2. What is plastic viscosity, about artificial lift
  • Ans. 

    Plastic viscosity is the measure of a fluid's resistance to flow, important in artificial lift operations.

    • Plastic viscosity is a rheological property of fluids, indicating how easily a fluid can flow under stress.

    • In artificial lift operations, understanding plastic viscosity helps in selecting the right pumping equipment and optimizing production.

    • Higher plastic viscosity can lead to increased pressure drop in the wellb...

  • Answered by AI
  • Q3. About Sucker rod
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via Company Website and was interviewed in Jun 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Graph based question. Duration: 45 mins

Round 3 - Technical 

(5 Questions)

  • Q1. What are different types of sensors used in oil and gas industries?
  • Ans. 

    Various sensors used in oil and gas industries include pressure sensors, temperature sensors, flow sensors, level sensors, and gas detectors.

    • Pressure sensors - used to measure pressure in pipelines and equipment.

    • Temperature sensors - monitor temperature levels in various processes.

    • Flow sensors - measure the flow rate of liquids or gases in pipelines.

    • Level sensors - detect the level of liquids in tanks or vessels.

    • Gas de...

  • Answered by AI
  • Q2. What is HAZOP and HAZID?
  • Ans. 

    HAZOP stands for Hazard and Operability Study, while HAZID stands for Hazard Identification.

    • HAZOP is a systematic method to identify potential hazards and operability issues in a process plant.

    • HAZID is a process used to identify hazards in a facility or operation before they become accidents.

    • Both HAZOP and HAZID are important tools in risk assessment and management in engineering projects.

  • Answered by AI
  • Q3. What are P, PI,PID in process control?
  • Ans. 

    P, PI, PID are types of controllers used in process control to regulate the output based on the input.

    • P stands for Proportional controller, which adjusts the output based on the error signal.

    • PI stands for Proportional-Integral controller, which not only adjusts based on error signal but also integrates the error over time.

    • PID stands for Proportional-Integral-Derivative controller, which adjusts based on error signal, i...

  • Answered by AI
  • Q4. What do you know about Digital Electronics?
  • Ans. 

    Digital Electronics is a branch of electronics that deals with digital signals and systems.

    • Deals with digital signals (0s and 1s)

    • Involves logic gates, flip-flops, and digital circuits

    • Used in computers, calculators, digital watches, etc.

    • Binary arithmetic and Boolean algebra are fundamental concepts

  • Answered by AI
  • Q5. What are level sensor, flow sensor, temperature sensor?
  • Ans. 

    Level sensor, flow sensor, and temperature sensor are devices used to measure different physical parameters in various industries.

    • Level sensor measures the level of a substance in a container or tank, such as liquid level sensors in water tanks.

    • Flow sensor measures the flow rate of a fluid, like a flow meter in a pipeline.

    • Temperature sensor measures the temperature of a system or environment, for example, a thermocoupl

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep your resume crisp. If you are in your final year of B.E. and want to pursue career in core, then this is the best company for you to gain experience and knowledge.

I applied via Walk-in and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Written technical of 3 questions
  • Q2. 1. Find weight and COG of an irrrgular shape. Unit weight of member was given. 2. Calculate force required for COG shift. W load was applied at center of rectangle and we had to calculate forces at all fou...
  • Ans. 

    Interview questions for Structural Engineer

    • For irregular shape, find volume and multiply by unit weight to get weight. Divide moment of each part by total weight to get COG.

    • To calculate force required for COG shift, use moment equation. Sum of moments about any point should be equal to zero.

    • For SFD and BMD, use equations of equilibrium and moment. Draw free body diagram to show all forces acting on the portal.

    • Understan...

  • Answered by AI
Round 2 - One-on-one 

(1 Question)

  • Q1. Explain barge and lifting analysis with full procedure. Various lifting factors. Support condition in barge and lifting analysis. Local check of equipment supporting beam.
  • Ans. 

    Barge and lifting analysis involves determining the support conditions and lifting factors for equipment on a barge.

    • Barge and lifting analysis is used to ensure that equipment on a barge is properly supported and can be safely lifted.

    • The procedure involves analyzing the support conditions of the barge and the equipment, as well as determining the lifting factors required to safely lift the equipment.

    • Various factors mus...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident of whatever you have written on resume.

I applied via Walk-in and was interviewed in May 2019. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Basic structural behaviour for different type Of loads like BMD and SFD and previous Work experience related questions.
  • Q2. Dynamic and static analysis of structure and foundations
  • Ans. 

    Dynamic and static analysis of structures and foundations is essential for ensuring their stability and safety.

    • Dynamic analysis involves studying the behavior of structures under dynamic loads such as earthquakes or wind.

    • Static analysis focuses on the response of structures to static loads like gravity or applied forces.

    • Both analyses help in determining the structural integrity, performance, and design optimization.

    • Dyn...

  • Answered by AI
  • Q3. Knowledge of codes like DNV , American and indian
  • Q4. Software used in past projects and SACS learned or not
  • Ans. 

    Yes, I have experience using software such as ETABS, SAP2000, and SAFE. I have also worked with SACS.

    • I have used ETABS for the design of high-rise buildings

    • I have used SAP2000 for the analysis of complex structures

    • I have used SAFE for the design of foundation systems

    • I have experience working with SACS for offshore structures

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - 1) Keep answer simple and straight
2) Accept if you don't answer
3) Show attitude that learning keeps you exiating and happy in working

Wood Group Interview FAQs

How many rounds are there in Wood Group Production Graduate Engineer Trainee interview?
Wood Group interview process usually has 3 rounds. The most common rounds in the Wood Group interview process are Aptitude Test, Group Discussion and Technical.
What are the top questions asked in Wood Group Production Graduate Engineer Trainee interview?

Some of the top questions asked at the Wood Group Production Graduate Engineer Trainee interview -

  1. Which flow system is more effective: countercurrent flow or concurrent flow, an...read more
  2. What is the procedure for designing a heat exchang...read more

Tell us how to improve this page.

Wood Group Production Graduate Engineer Trainee Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Accountant
220 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Process Engineer
113 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Billing Accountant
96 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Accounts Payable Accountant
67 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Payroll Administrator
64 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Wood Group with

Baker Hughes

4.0
Compare

Schlumberger

4.0
Compare

Halliburton

3.7
Compare

TechnipFMC

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview