Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Quess Team. If you also belong to the team, you can get access from here

Quess Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Quess Billing Engineer Interview Questions and Answers

Updated 29 May 2024

Quess Billing Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - HR 

(1 Question)

  • Q1. Tell me about yourself

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Related to Power Sector
  • Ans. Power cycle piping. Erection sequence of Boiler primary and secondary structure. T&P required at time of starting work.
  • Answered Anonymously
  • Q2. Related to Erection planning
  • Q3. How much manpower required to complete the plan
  • Ans. 

    The manpower required to complete a plan depends on the scope, complexity, and timeline of the project.

    • Manpower requirements can vary based on the size and complexity of the project.

    • Consider the skills and expertise needed for each task in the plan.

    • Factor in the timeline and deadlines for completing the plan.

    • Utilize project management tools to estimate manpower needs accurately.

    • Example: A large-scale construction proje...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Start your carrier and And get experience of MNC
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Feb 2023. There were 3 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. General discussion
Round 2 - Technical 

(1 Question)

  • Q1. Complete overview of technology you are working
Round 3 - Technical 

(1 Question)

  • Q1. Client interview

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company

I applied via Recruitment Consultant and was interviewed before Sep 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview are easy but technical
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Feb 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

Very good interview normally ask for experience and about yourself.

Round 2 - One-on-one 

(1 Question)

  • Q1. Tell me about yourself
Round 3 - One-on-one 

(4 Questions)

  • Q1. About your last employer
  • Q2. Why should we hire you
  • Q3. What is your salary expectation.
  • Q4. Tell me about your 1 weakness and strength.
Round 4 - Assignment 

Target to sell 5 brodband for qualified test in one month

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Create an interface in python or java
  • Ans. 

    Creating an interface in Python or Java

    • In Python, create an interface using the 'abc' module and the 'abstractmethod' decorator

    • In Java, create an interface using the 'interface' keyword

    • Interfaces define a set of methods that a class must implement

  • Answered by AI
  • Q2. Difference between return and yield in python
  • Ans. 

    Return is used to exit a function and yield is used to produce a series of values

    • Return statement is used to exit a function and return a value to the caller

    • Yield statement is used in generator functions to produce a series of values

    • Yield is used to create iterators, while return is used to return a value from a function

    • Example: def generator_function(): yield 1 yield 2 yield 3

    • Example: def return_function()

  • Answered by AI

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Feb 2022. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. All its related to resume
  • Q2. All related oops concept

Interview Preparation Tips

Interview preparation tips for other job seekers - everything goes well .interview is good and offer is accepted.

I applied via Recruitment Consulltant and was interviewed before Aug 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. What is your education
  • Q2. What do you do beforehand?
Round 3 - One-on-one 

(2 Questions)

  • Q1. We have metal packing. can you
  • Ans. 

    Yes, I can work with metal packing.

    • I have experience working with metal packaging in my previous job.

    • I am familiar with the different types of metal packaging materials and their properties.

    • I can use tools and equipment to handle and manipulate metal packaging.

    • I can follow safety protocols when working with metal packaging.

    • I can troubleshoot and fix issues with metal packaging if needed.

  • Answered by AI
  • Q2. Do you run the axle perfectly?
  • Ans. 

    Yes, I have experience in running axles perfectly.

    • I have experience in operating and maintaining various types of axles.

    • I ensure that the axle is properly lubricated and aligned before running it.

    • I monitor the axle's performance and make adjustments as necessary.

    • I follow all safety protocols and guidelines while operating the axle.

    • For example, I have experience in running the axle of a heavy-duty truck and ensuring tha

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Work timings: Flexible Timings
Market yourself. ...
Apply even if you're not fully qualified. ...
Job search like it's your job. ...
Use informational interviews to network. ...
Set yourself apart with letters of recommendation. ...
Know yourself and what you want. ...
Pump yourself up and stay positive.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(8 Questions)

  • Q1. What is the Full form of TMT
  • Ans. 

    TMT stands for Thermo-Mechanically Treated reinforcement bars used in construction.

    • TMT bars are made by subjecting mild steel bars to a combination of heat treatment and mechanical deformation.

    • This process imparts greater strength and ductility to the bars, making them ideal for use in construction.

    • TMT bars are widely used in reinforced concrete structures such as buildings, bridges, and dams.

    • They offer superior corros...

  • Answered by AI
  • Q2. What is the 500DMeans at TMT bars?
  • Ans. 

    500D means the yield strength of TMT bars is 500 MPa.

    • 500D is a grade of TMT bars used in construction.

    • The 'D' stands for ductility, which is the ability of the material to deform without breaking.

    • The yield strength of 500D TMT bars is 500 MPa.

    • These bars are commonly used in high-rise buildings, bridges, and other structures that require high strength and durability.

  • Answered by AI
  • Q3. What is the required steel at the percentage concrete?
  • Ans. 

    The required steel at the percentage concrete depends on the design and specifications of the structure.

    • The amount of steel reinforcement needed in concrete is determined by the design and specifications of the structure.

    • Factors such as the size and shape of the structure, the loads it will bear, and the desired strength and durability of the concrete will all affect the required steel percentage.

    • The steel percentage c...

  • Answered by AI
  • Q4. What is the stress and strain?
  • Ans. 

    Stress is the force applied per unit area, while strain is the deformation caused by stress.

    • Stress is a measure of the internal forces within a material, while strain is the measure of the deformation of the material.

    • Stress is expressed in units of force per unit area, while strain is expressed as a ratio of the change in length or shape to the original length or shape.

    • Stress and strain are related by the material's el...

  • Answered by AI
  • Q5. Which type of stress failure at brick wall?
  • Ans. 

    The stress failure at brick wall can be due to compressive or tensile stress.

    • Compressive stress failure occurs when the brick wall is unable to withstand the weight or load placed on it.

    • Tensile stress failure occurs when the brick wall is unable to withstand the forces that pull it apart.

    • Cracking, bulging, or collapse of the wall can be signs of stress failure.

    • Reinforcing the wall with steel bars or using thicker brick

  • Answered by AI
  • Q6. White marvel is this rock?
  • Ans. 

    White marble is a metamorphic rock composed of recrystallized carbonate minerals, mainly calcite or dolomite.

    • It is commonly used in construction and sculpture.

    • It is formed from limestone or dolomite that has undergone heat and pressure.

    • It is often found in quarries in countries such as Italy, Greece, and India.

  • Answered by AI
  • Q7. What is myka sis ?
  • Q8. Standerd Coarse sand size?
  • Ans. 

    Standard coarse sand size ranges from 2.0mm to 4.75mm.

    • Standard coarse sand is commonly used in construction and civil engineering projects.

    • It is typically graded between 2.0mm to 4.75mm in size.

    • This type of sand is often used as a base material for concrete and asphalt.

    • It can also be used for drainage systems and as a bedding material for pipes.

    • The size and shape of the sand particles can affect the strength and durabi

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Up above these questions are very good. Very much challenge when you have few time period of project, vast priority of project,and contractors are unidentified what is doing the job first to last .
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
No response

I applied via Walk-in and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Tell about credit card
  • Ans. 

    A credit card is a payment card issued by a financial institution, allowing the cardholder to borrow funds to make purchases.

    • Credit cards have a credit limit, which is the maximum amount of money that can be borrowed

    • Cardholders must pay back the borrowed amount, usually with interest if not paid in full by the due date

    • Credit cards offer convenience and security for making purchases both in-store and online

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. Tell about family
  • Q2. Self introduction

Quess Interview FAQs

How many rounds are there in Quess Billing Engineer interview?
Quess interview process usually has 1 rounds. The most common rounds in the Quess interview process are HR.

Tell us how to improve this page.

Quess Billing Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Randstad Interview Questions
3.8
 • 262 Interviews
IKS Health Interview Questions
3.6
 • 233 Interviews
Team Lease Interview Questions
3.9
 • 201 Interviews
IntouchCX Interview Questions
2.9
 • 193 Interviews
Alldigi Tech Interview Questions
4.0
 • 193 Interviews
TTEC India Interview Questions
3.7
 • 136 Interviews
Globiva Interview Questions
3.1
 • 106 Interviews
ReSource Pro Interview Questions
4.0
 • 93 Interviews
Adecco Group Interview Questions
3.7
 • 89 Interviews
View all

Fast track your campus placements

View all
Relationship Officer
991 salaries
unlock blur

₹1.2 L/yr - ₹5 L/yr

Sales Executive
785 salaries
unlock blur

₹1.1 L/yr - ₹5.7 L/yr

Team Lead
498 salaries
unlock blur

₹1.8 L/yr - ₹8.5 L/yr

Associate Engineer
459 salaries
unlock blur

₹1.5 L/yr - ₹4.6 L/yr

Network Engineer
329 salaries
unlock blur

₹1.6 L/yr - ₹7 L/yr

Explore more salaries
Compare Quess with

Team Lease

3.9
Compare

Security and Intelligence Services (India)

4.2
Compare

ManpowerGroup

3.8
Compare

Randstad

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview