Upload Button Icon Add office photos

PCBL Chemical Limited

Compare button icon Compare button icon Compare

Filter interviews by

PCBL Chemical Limited Interview Questions, Process, and Tips

Updated 19 Feb 2025

Top PCBL Chemical Limited Interview Questions and Answers

View all 31 questions

PCBL Chemical Limited Interview Experiences

Popular Designations

59 interviews found

I applied via LinkedIn and was interviewed in Feb 2022. There was 1 interview round.

Round 1 - Technical 

(9 Questions)

  • Q1. Regarding gearbox shaft axial float which side will be on higher, one with high speed input or one with low speed output? And explain why
  • Q2. Tell about failure cases of any equipment in your experience
  • Q3. Tell about shaft run out at bearing fixing area how much is allowable
  • Ans. 

    Allowable shaft run out at bearing fixing area depends on the application and type of bearing used.

    • The allowable shaft run out at bearing fixing area varies depending on the application and type of bearing used.

    • For example, for deep groove ball bearings, the allowable shaft run out is typically 0.05 mm to 0.1 mm.

    • For cylindrical roller bearings, the allowable shaft run out is typically 0.02 mm to 0.05 mm.

    • It is important...

  • Answered by AI
  • Q4. How much can bearing internal clearance can be?
  • Ans. 

    The internal clearance of a bearing can vary depending on the type and size of the bearing.

    • Bearing internal clearance refers to the amount of internal space between the rolling elements and the inner and outer rings of the bearing.

    • It is important to have the correct internal clearance in a bearing to ensure proper functioning and prevent issues such as excessive heat or premature failure.

    • The internal clearance can be s...

  • Answered by AI
  • Q5. Bearing outer race to bearing housing clearance?
  • Ans. 

    The bearing outer race to bearing housing clearance is the gap between the outer race of the bearing and the housing it sits in.

    • The clearance should be within the manufacturer's recommended range

    • Too much clearance can cause vibration and noise

    • Too little clearance can cause overheating and premature wear

    • Clearance can be measured using a feeler gauge or dial indicator

    • Proper lubrication can help maintain the correct clear

  • Answered by AI
  • Q6. Bearing outer race is worn inside housing how can it be avoided? how it can be measured?
  • Ans. 

    To avoid bearing outer race wear inside housing, proper installation and maintenance is necessary.

    • Ensure proper alignment during installation

    • Use correct lubrication to reduce friction

    • Regularly inspect and replace worn parts

    • Measure wear with micrometer or dial indicator

    • Check for signs of overheating or misalignment

  • Answered by AI
  • Q7. Types of gearboxes? What's your experience
  • Ans. 

    Gearboxes are mechanical devices that transmit power from an input to an output shaft.

    • Manual transmission

    • Automatic transmission

    • Continuously variable transmission

    • Dual-clutch transmission

    • My experience includes working with all types of gearboxes in various industries.

    • I have expertise in troubleshooting and repairing gearbox issues.

    • I have also worked on designing and implementing gearbox systems for specific applications.

  • Answered by AI
  • Q8. Pumps API seal plans?
  • Ans. 

    API seal plans are standardized plans for sealing pumps in accordance with API standards.

    • API seal plans are developed by the American Petroleum Institute (API) to ensure safe and reliable operation of pumps in the oil and gas industry.

    • There are various types of API seal plans, each designed for specific applications and operating conditions.

    • API seal plans typically include a combination of mechanical seals, seal flush ...

  • Answered by AI
  • Q9. RCA, FMEA, explain with example

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare technically strong with what you have known

Top PCBL Chemical Limited Section Incharge Interview Questions and Answers

Q1. Tell about shaft run out at bearing fixing area how much is allowable
View answer (2)

Section Incharge Interview Questions asked at other Companies

Q1. Tell about shaft run out at bearing fixing area how much is allowable
View answer (2)

Field Executive Interview Questions & Answers

user image Tufan Chakraborty

posted on 30 Nov 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Bag filter linkage analysis..
  • Q2. Dryer, paletizer, reactor etc

Field Executive Interview Questions asked at other Companies

Q1. What is Injury On Nitrogen leak?
View answer (12)
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
Selected Selected

I was interviewed in Aug 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. So many technical questions asked
  • Q2. Compressor oil pressure range
  • Q3. Compressor loading and unloading process
Round 2 - HR 

(1 Question)

  • Q1. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Behaviour and Personality regarding and background

Senior Executive Interview Questions asked at other Companies

Q1. If oneday the men power is very less due to some problem and lode is more that day as a senior Exucative, how will u handle your team ?
View answer (56)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - One-on-one 

(2 Questions)

  • Q1. How to ensure 100% compliance?
  • Ans. 

    To ensure 100% compliance, regular training, audits, clear policies, and effective communication are essential.

    • Regular training sessions to educate employees on compliance policies and procedures

    • Conducting regular audits to identify any non-compliance issues and take corrective actions

    • Establishing clear and concise compliance policies and procedures for employees to follow

    • Effective communication channels to ensure empl...

  • Answered by AI
  • Q2. How is your experiance in negotiation?
  • Ans. 

    I have extensive experience in negotiation through handling employee disputes, vendor contracts, and salary negotiations.

    • Successfully resolved conflicts between team members by finding common ground and reaching a compromise

    • Negotiated vendor contracts to secure better pricing and terms for the company

    • Conducted salary negotiations with job candidates to reach mutually beneficial agreements

  • Answered by AI

Assistant Manager- HR Interview Questions asked at other Companies

Q1. how to maintain manpower data and what are the activities are there?
View answer (2)

PCBL Chemical Limited interview questions for popular designations

 Assistant Manager

 (11)

 Senior Executive

 (4)

 Graduate Engineer Trainee (Get)

 (3)

 Mechanical Engineer

 (2)

 Deputy Manager

 (2)

 Management Trainee

 (1)

 Product Engineer

 (1)

 Field Engineer

 (1)

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Company Website and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(7 Questions)

  • Q1. Positive Isolation
  • Q2. Turbine Rolling Black out condition
  • Ans. 

    Turbine rolling black out condition refers to a situation where a turbine experiences a sudden loss of power and stops rotating.

    • Turbine rolling black out condition can occur due to various reasons such as mechanical failures, electrical faults, or grid disturbances.

    • Examples of causes include turbine blade damage, generator malfunction, or grid overload.

    • Proper maintenance and monitoring of the turbine system can help pr...

  • Answered by AI
  • Q3. Delta T Generator winding temperature
  • Ans. 

    Delta T refers to the temperature difference between the generator winding and its surroundings.

    • Delta T is an important factor in determining the health and efficiency of a generator.

    • Monitoring the generator winding temperature helps prevent overheating and potential damage.

    • Maintaining a proper Delta T ensures optimal performance and longevity of the generator.

    • For example, if the generator winding temperature is 80°C a...

  • Answered by AI
  • Q4. Bearing vibration
  • Q5. Condenser types
  • Q6. Vaccum drop reason
  • Ans. 

    Vacuum drop can be caused by leaks in the system, clogged filters, or a malfunctioning vacuum pump.

    • Leaks in the system can cause a drop in vacuum pressure.

    • Clogged filters can restrict airflow and lead to a decrease in vacuum levels.

    • A malfunctioning vacuum pump may not be able to maintain the desired vacuum pressure.

    • Check for leaks by using a leak detector or soapy water.

    • Inspect and clean filters regularly to prevent cl...

  • Answered by AI
  • Q7. CT fan & gear box ratio

Field Engineer Interview Questions asked at other Companies

Q1. What is insulator and conductors and semiconductors
View answer (6)

Get interview-ready with Top PCBL Chemical Limited Interview Questions

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Campus Placement and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. Introduce Yourself
  • Q2. What is Carbon Black?
  • Ans. 

    Carbon Black is a form of elemental carbon that is used in various industries for its properties such as high surface area and light absorption.

    • Carbon Black is produced by incomplete combustion of heavy petroleum products.

    • It is commonly used as a reinforcing filler in tires, plastics, and other rubber products.

    • Carbon Black is also used as a pigment in inks, coatings, and plastics.

    • It is known for its ability to absorb u...

  • Answered by AI
  • Q3. Unit Conversion
  • Q4. Your Daily Routine

Interview Preparation Tips

Interview preparation tips for other job seekers - Have some knowledge about Company and your designation and your study.
Most important tip is Confidance. Stay calm, be confident and have eye contact with interviewer.

Executive Quality Assurance Interview Questions asked at other Companies

Q1. Types of sterilization techniques And differences between dry heat sterilization & moist heat sterilization?
View answer (1)

Jobs at PCBL Chemical Limited

View all

Deputy Manager Interview Questions & Answers

user image jeeshan mansoori

posted on 31 May 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What you have experienced in last project
Round 2 - One-on-one 

(1 Question)

  • Q1. Tell me about process
  • Ans. 

    Process refers to a series of actions or steps taken to achieve a particular goal or outcome.

    • Process involves breaking down tasks into smaller steps

    • It often includes defining roles and responsibilities

    • Monitoring progress and making adjustments as needed

    • Examples: project management process, manufacturing process

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Why should we hire you.?

Deputy Manager Interview Questions asked at other Companies

Q1. 1.WHAT IS SPECIAL OF UR HOME TOWN 2.Who is Main compitetor with us and which products...3.what is main business in your area and its functions...4 Previous comoany achevements 5.Your strengts and weakness.
View answer (69)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Instrumentation
  • Q2. Projects related
Round 2 - HR 

(2 Questions)

  • Q1. About your self
  • Q2. Why you leave your current company
  • Ans. 

    Seeking new challenges and growth opportunities

    • Desire for career advancement

    • Looking for a more challenging role

    • Seeking better work-life balance

    • Company restructuring or downsizing

    • Relocation to a different city

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Strong technical round and HR also

Deputy Manager Instrumentation Interview Questions asked at other Companies

Q1. 1) No of persons used to report 2) Salary Expectation.
View answer (1)

Interview Questions & Answers

user image Sanjeet bhardwaj

posted on 29 Oct 2024

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Indeed and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Group Discussion 

About self and work experience back ground

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be truthful in your resume. It is very easy to catch false or lies during the interview by asking basic questions.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is the process? Process flow diagram How to handle emergency situation? What are the safety precautions required?
  • Ans. 

    The process involves creating a process flow diagram, handling emergency situations, and following safety precautions.

    • Create a process flow diagram to visualize the steps involved in the assistant manager role.

    • Establish protocols for handling emergency situations such as fire, medical emergencies, or security threats.

    • Ensure all staff are trained on emergency procedures and have access to emergency contact information.

    • I...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Tell me about your? Compensation expected
  • Ans. 

    I am looking for a competitive salary based on my experience and qualifications.

    • I have researched the average salary range for Assistant Managers in this industry

    • I am open to discussing benefits and bonuses as part of the compensation package

    • I am confident in my abilities and believe I bring value to the team

  • Answered by AI
Round 4 - Technical 

(1 Question)

  • Q1. Reactor operation Dryer operation Pelletiser operation
Round 5 - HR 

(1 Question)

  • Q1. Tell me about yourself Compensation expected

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well about process
And emergency situation control response

Top PCBL Chemical Limited Assistant Manager Interview Questions and Answers

Q1. What is vfd? What is softstarter? How the synchronization is done?
View answer (3)

Assistant Manager Interview Questions asked at other Companies

Q1. You are Handling cash operations then how you manage operations with sales ?
View answer (87)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Thomas International PPA TEST

Interview Preparation Tips

Interview preparation tips for other job seekers - I will handle full purchase and sale operations and maintain accounts as well .Full export import procedure , operations and also handle accounts of that, Bill processing.

Know to prepare all type of documents domestic and exim too, like e invoice, e way bill, tds gst impact maintain, full finance procedure handling, like LC , CC, bill of discounting etc,many more activities which i cannot describe here

Commercial Manager Interview Questions asked at other Companies

Q1. How can you satisfy the management requirements through your services pertaining to sales distribution & related services
View answer (9)

PCBL Chemical Limited Interview FAQs

How many rounds are there in PCBL Chemical Limited interview?
PCBL Chemical Limited interview process usually has 2-3 rounds. The most common rounds in the PCBL Chemical Limited interview process are Technical, Resume Shortlist and HR.
How to prepare for PCBL Chemical Limited interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at PCBL Chemical Limited. The most common topics and skills that interviewers at PCBL Chemical Limited expect are Maintenance, Production, DCS, SAP and Power Plant.
What are the top questions asked in PCBL Chemical Limited interview?

Some of the top questions asked at the PCBL Chemical Limited interview -

  1. Tell about shaft run out at bearing fixing area how much is allowa...read more
  2. What is vfd? What is softstarter? How the synchronization is do...read more
  3. Bearing outer race is worn inside housing how can it be avoided? how it can be ...read more
How long is the PCBL Chemical Limited interview process?

The duration of PCBL Chemical Limited interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

PCBL Chemical Limited Interview Process

based on 51 interviews

Interview experience

4.3
  
Good
View more

Interview Questions from Similar Companies

DCM Shriram Interview Questions
4.2
 • 87 Interviews
HEG Interview Questions
3.8
 • 13 Interviews
Goodluck Interview Questions
3.6
 • 12 Interviews
Rain Industries Interview Questions
3.6
 • 11 Interviews
Birla Carbon Interview Questions
3.8
 • 7 Interviews
Graphite India Interview Questions
3.6
 • 6 Interviews
View all

PCBL Chemical Limited Reviews and Ratings

based on 493 reviews

4.0/5

Rating in categories

3.7

Skill development

3.5

Work-life balance

4.1

Salary

3.7

Job security

3.6

Company culture

3.7

Promotions

3.5

Work satisfaction

Explore 493 Reviews and Ratings
Mechanical Technician

Mundra

5-10 Yrs

Not Disclosed

CPP Field Operator

Mundra

4-9 Yrs

Not Disclosed

Mechanical Engineer

Mundra

5-10 Yrs

Not Disclosed

Explore more jobs
Assistant Manager
408 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
152 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
146 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
125 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
51 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare PCBL Chemical Limited with

Birla Carbon

3.8
Compare

Himadri Speciality Chemical

3.9
Compare

Continental Carbon India

3.7
Compare

Goodluck

3.6
Compare
Did you find this page helpful?
Yes No
write
Share an Interview