Upload Button Icon Add office photos

Filter interviews by

Neel Metal Products Interview Questions, Process, and Tips

Updated 25 Jan 2025

Top Neel Metal Products Interview Questions and Answers

View all 43 questions

Neel Metal Products Interview Experiences

Popular Designations

40 interviews found

Interview Questions & Answers

user image Anonymous

posted on 17 Aug 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Technically strong
  • Q2. Personal introduction
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. For Maintenance
Round 2 - One-on-one 

(2 Questions)

  • Q1. Tha job bass maintenance
  • Q2. Good plant maintenance engineer

Junior Executive Interview Questions asked at other Companies

Q1. 1, What is the unit operation and unit process ?
View answer (3)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Referral and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(5 Questions)

  • Q1. Define 7 QC tool
  • Ans. 

    7 QC tools are a set of tools used for quality control and problem-solving in manufacturing processes.

    • Check sheet: Used to collect and analyze data in a systematic manner.

    • Histogram: Represents data distribution visually to identify patterns.

    • Pareto chart: Helps prioritize issues by showing the most significant factors.

    • Cause and effect diagram (Fishbone diagram): Identifies root causes of a problem.

    • Scatter diagram: Shows...

  • Answered by AI
  • Q2. Fishbone diagram
  • Ans. 

    Fishbone diagram is a visual tool used to identify and analyze potential causes of a problem or effect.

    • Also known as Ishikawa diagram or cause-and-effect diagram

    • Helps in organizing and categorizing possible causes of a problem

    • Commonly used in quality management and process improvement

    • Example: If a manufacturing process is experiencing defects, the fishbone diagram can help identify potential causes such as materials, m

  • Answered by AI
  • Q3. Pareto analysis
  • Q4. Tell me about yourself
  • Ans. 

    Good afternoon sir. Thanks for giving me this opportunity to introduce myself. I'm Sandeep kumar. I'm 27 years old. I'm from Varanasi I have completed a Diploma (polytechnic) in Bte.up Lucknow University with 69%. I'm a self-motivated and hardworking person. My hobbies are traveling and reading books and working. My family consists of 8 people including my parents and 3 brothers and sister-in-laws. And that's

  • Answered Anonymously
  • Q5. Which products did you see in the company?
  • Ans. 

    May be every model of muffler was visible (K0PG, K0LF ,K0YA AND KZK )

  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - To seek a position in the organisation that is challenging simulating where by I can rendar a valuable productive and achieve productive contribution and achieve personal growth

Diploma Mechanical Engineer Interview Questions asked at other Companies

Q1. What is the second law of thermodynamics?
View answer (14)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Walk-in

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Make for Hole program manual and delcam
  • Ans. 

    To create a manual for Hole program in Delcam

    • Start by outlining the purpose and scope of the program

    • Include step-by-step instructions for using the program

    • Provide screenshots or diagrams to aid understanding

    • Include troubleshooting tips and common errors

    • Ensure the manual is easy to navigate and understand

  • Answered by AI
  • Q2. Machine operating and tale refrance

Interview Preparation Tips

Interview preparation tips for other job seekers - When you have a dream, you've got to grab it and never let go.

CAD CAM Programmer Interview Questions asked at other Companies

Q1. What is the smallest cutter you have used and what are parameters of it
View answer (1)

Neel Metal Products interview questions for popular designations

 Junior Executive

 (3)

 Electrical Technician

 (2)

 Quality Engineer

 (2)

 Senior Executive

 (2)

 Purchase Executive

 (1)

 QA Executive

 (1)

 Maintenance Engineer

 (1)

 Quality Assurance/Quality Control Manager

 (1)

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Technical department related
Round 3 - HR 

(1 Question)

  • Q1. General background

Senior Executive Engineer Interview Questions asked at other Companies

Q1. 1. What you know about Fe-C diagram? 2. Explain your previous job profile? 3. What was your personal contribution? 4. Tensile strength of steel? And few question related to previous job profile. The interview was about 50 minutes.
View answer (1)

Get interview-ready with Top Neel Metal Products Interview Questions

Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Many questions related to steel sectors
  • Q2. Related to automobile industry .
  • Q3. HR discussion about the capability to how handle the entirework

Interview Preparation Tips

Interview preparation tips for other job seekers - Jobs are totally depends on your performance in front of top management.

Top Neel Metal Products Senior Executive Interview Questions and Answers

Q1. Do you deal with sheet supplier ? If yes please explain.
View answer (1)

Senior Executive Interview Questions asked at other Companies

Q1. If oneday the men power is very less due to some problem and lode is more that day as a senior Exucative, how will u handle your team ?
View answer (56)
Round 1 - Technical 

(4 Questions)

  • Q1. What is the SI unit of current?
  • Ans. 

    The SI unit of current is Ampere (A).

    • Current is the flow of electric charge.

    • Ampere is named after the French physicist Andre-Marie Ampere.

    • One Ampere is defined as the flow of one Coulomb of charge per second.

    • Current is measured using an ammeter.

    • The symbol for Ampere is 'A'.

  • Answered by AI
  • Q2. What is the density of water?
  • Ans. 

    The density of water is approximately 1 gram per cubic centimeter.

    • The density of water is a physical property that describes the mass of water per unit volume.

    • It is commonly measured in grams per cubic centimeter (g/cm³) or kilograms per liter (kg/L).

    • The density of water is influenced by temperature and pressure.

    • At 4 degrees Celsius, the density of water is exactly 1 g/cm³.

    • Water is unique because its maximum density oc...

  • Answered by AI
  • Q3. What is the range of mercury thermometer?
  • Ans. 

    The range of a mercury thermometer is typically -40°C to 500°C.

    • The lower limit of the range is usually -40°C.

    • The upper limit of the range is typically 500°C.

    • Mercury thermometers are commonly used in various industries and laboratories.

    • They are not suitable for measuring temperatures below -40°C or above 500°C.

  • Answered by AI
  • Q4. What is the principle of c type burdon tube?
  • Ans. 

    C type bourdon tube is a mechanical pressure sensing element used in pressure gauges and switches.

    • It is a curved tube that straightens under pressure, causing a pointer to move on a calibrated scale.

    • It is made of a metal alloy, typically brass or bronze.

    • It is commonly used in industrial applications to measure pressure in pipes and tanks.

    • It is named after its inventor, Eugene Bourdon.

    • It is sensitive to changes in tempe...

  • Answered by AI
Round 2 - Assignment 

Interview Preparation Tips

Topics to prepare for Neel Metal Products Implementation Engineer interview:
  • That will give me a opportunity.
  • Communication Skills
  • Lecturer Activities
  • Quality
Interview preparation tips for other job seekers - I will work responsibility and honestly

Implementation Engineer Interview Questions asked at other Companies

Q1. What is the SI unit of current?
View answer (5)
Round 1 - HR 

(3 Questions)

  • Q1. Tell me about your self
  • Q2. Family background and Location etc
  • Q3. Why you need change the job with reason
Round 2 - Technical 

(3 Questions)

  • Q1. Experience related questions
  • Q2. SAP Related questions
  • Q3. Management questions

Interview Preparation Tips

Interview preparation tips for other job seekers - We need work very hard come here and other smart fellow not able sustainable for 3months

Deputy Manager Supply Chain Interview Questions asked at other Companies

Q1. Commodities experience
View answer (1)

Interview Questions & Answers

user image Anonymous

posted on 9 Oct 2022

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Factory act compliance cgwa compliance UEPPCB Compliance Fire noc Hira
  • Q2. Factory act regulatory compliance

Interview Preparation Tips

Interview preparation tips for other job seekers - Knowledge of risk assignment
JSA
Permit to work
Job specific training
Interview experience
2
Poor
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Mar 2023.

Round 1 - Technical 

(1 Question)

  • Q1. Do you know about 5S
  • Ans. 

    5S is a methodology used to organize a workplace for efficiency and effectiveness by identifying, sorting, setting in order, shining, and sustaining.

    • Sort: Remove unnecessary items from the workplace.

    • Set in order: Organize remaining items in a logical manner.

    • Shine: Clean and inspect the workplace regularly.

    • Standardize: Establish procedures and schedules to maintain the first three S's.

    • Sustain: Maintain and improve the s

  • Answered by AI

Executive Quality Assurance Interview Questions asked at other Companies

Q1. Types of sterilization techniques And differences between dry heat sterilization & moist heat sterilization?
View answer (1)

Neel Metal Products Interview FAQs

How many rounds are there in Neel Metal Products interview?
Neel Metal Products interview process usually has 2-3 rounds. The most common rounds in the Neel Metal Products interview process are Technical, HR and Resume Shortlist.
How to prepare for Neel Metal Products interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Neel Metal Products. The most common topics and skills that interviewers at Neel Metal Products expect are Sheet Metal, SAP, Maintenance, Drafting and Welding.
What are the top questions asked in Neel Metal Products interview?

Some of the top questions asked at the Neel Metal Products interview -

  1. What is the SI unit of curre...read more
  2. What is the range of mercury thermomet...read more
  3. Why panel checker or fixture colour is red and what is the ...read more
How long is the Neel Metal Products interview process?

The duration of Neel Metal Products interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

Neel Metal Products Interview Process

based on 45 interviews

Interview experience

3.8
  
Good
View more

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 1k Interviews
Tata Steel Interview Questions
4.1
 • 836 Interviews
Maruti Suzuki Interview Questions
4.2
 • 600 Interviews
JSW Steel Interview Questions
3.9
 • 582 Interviews
Ashok Leyland Interview Questions
4.1
 • 239 Interviews
Bharat Forge Interview Questions
3.9
 • 55 Interviews
Vedanta Limited Interview Questions
3.8
 • 46 Interviews
View all

Neel Metal Products Reviews and Ratings

based on 734 reviews

4.0/5

Rating in categories

3.9

Skill development

3.8

Work-life balance

3.6

Salary

4.1

Job security

3.7

Company culture

3.4

Promotions

3.8

Work satisfaction

Explore 734 Reviews and Ratings
Senior Executive
193 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
180 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
173 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
99 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Executive
64 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Neel Metal Products with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Hindalco Industries

4.2
Compare

Vedanta Limited

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview