Filter interviews by
I applied via Referral and was interviewed in Aug 2023. There were 2 interview rounds.
7 QC tools are a set of tools used for quality control and problem-solving in manufacturing processes.
Check sheet: Used to collect and analyze data in a systematic manner.
Histogram: Represents data distribution visually to identify patterns.
Pareto chart: Helps prioritize issues by showing the most significant factors.
Cause and effect diagram (Fishbone diagram): Identifies root causes of a problem.
Scatter diagram: Shows...
Fishbone diagram is a visual tool used to identify and analyze potential causes of a problem or effect.
Also known as Ishikawa diagram or cause-and-effect diagram
Helps in organizing and categorizing possible causes of a problem
Commonly used in quality management and process improvement
Example: If a manufacturing process is experiencing defects, the fishbone diagram can help identify potential causes such as materials, m
Good afternoon sir. Thanks for giving me this opportunity to introduce myself. I'm Sandeep kumar. I'm 27 years old. I'm from Varanasi I have completed a Diploma (polytechnic) in Bte.up Lucknow University with 69%. I'm a self-motivated and hardworking person. My hobbies are traveling and reading books and working. My family consists of 8 people including my parents and 3 brothers and sister-in-laws. And that's
May be every model of muffler was visible (K0PG, K0LF ,K0YA AND KZK )
Top trending discussions
I applied via Job Fair
posted on 31 May 2024
I applied via Approached by Company and was interviewed in Dec 2023. There was 1 interview round.
posted on 1 Aug 2021
I applied via LinkedIn and was interviewed before Dec 2022. There were 4 interview rounds.
Basic engineering questions
The least count of a vernier caliper is the smallest measurement that can be read on the scale.
The least count is typically 0.02 mm or 0.001 inches on a vernier caliper.
It is determined by dividing the smallest division on the main scale by the total number of divisions on the vernier scale.
For example, if the main scale has divisions of 1 mm and the vernier scale has 50 divisions, the least count would be 0.02 mm.
The least count of 0.02 means that the smallest measurement that can be accurately read on the measuring instrument is 0.02 units.
Least count is the smallest measurement that can be accurately read on a measuring instrument.
In this case, the least count is 0.02 units, meaning any measurement can be read in increments of 0.02.
It is important to consider the least count when taking measurements to ensure accuracy.
posted on 3 Nov 2022
posted on 19 Dec 2022
I applied via Company Website and was interviewed in Nov 2022. There were 2 interview rounds.
I applied via Approached by Company and was interviewed in Oct 2023. There was 1 interview round.
A starter control circuit is used to control the starting and stopping of an electric motor.
The starter control circuit typically includes a start button, stop button, overload relay, and contactor.
When the start button is pressed, it energizes the contactor which allows power to flow to the motor.
The overload relay protects the motor from overheating by sensing the current drawn by the motor.
The stop button breaks the...
To perform an id run test on a VFD, you need to follow specific steps to ensure the variable frequency drive is functioning correctly.
Connect the VFD to a motor and power supply
Set the VFD parameters according to the motor specifications
Run the motor at different speeds to test the VFD's ability to control the motor
Monitor the motor's performance and check for any abnormalities
Record the test results for analysis and t
posted on 17 Nov 2022
I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 2 interview rounds.
I applied via Campus Placement and was interviewed before May 2022. There were 2 interview rounds.
The number of parts in sfc panels varies depending on the specific panel and its design.
The number of parts can range from a few to several hundred.
Some common parts include solar cells, wiring, and protective coatings.
The number of parts can also depend on the size and power output of the panel.
Manufacturers may use different materials and designs, affecting the number of parts.
It is important to consider the number a...
Slip-ring motor speed can be controlled by varying the resistance in the rotor circuit.
Slip-ring motors have a wound rotor with external resistors.
By changing the resistance in the rotor circuit, the speed can be controlled.
This is done by adding or removing resistors from the rotor circuit.
The speed can also be controlled by changing the voltage applied to the stator.
This method is commonly used in industries where va...
Adding external resistance increases the total resistance in a circuit.
External resistance can be added in series or parallel to the existing circuit.
This can be useful in controlling the current flow and voltage drop in the circuit.
For example, adding a resistor in series with an LED can limit the current flowing through it and prevent it from burning out.
Similarly, adding a resistor in parallel with a component can r...
Main parts of eot cranes include bridge, trolley, hoist, end trucks, runway beams, and electrical components.
Bridge: main structure that spans the width of the bay
Trolley: carries the hoist and moves horizontally along the bridge
Hoist: lifts and lowers the load
End trucks: located on either side of the bridge and house the wheels for movement
Runway beams: support the crane and provide a path for the crane to travel alon...
Slip-ring motors are used in EOT cranes for their ability to provide high starting torque and smooth acceleration.
Slip-ring motors offer high starting torque, making them suitable for heavy loads in EOT cranes.
They provide smooth acceleration, reducing wear and tear on the crane components.
Slip-ring motors allow for speed control and reversing capabilities, important in crane operations.
These motors are also able to ha...
based on 1 interview
Interview experience
based on 4 reviews
Rating in categories
Assistant Manager
187
salaries
| ₹4.2 L/yr - ₹12 L/yr |
Senior Executive
185
salaries
| ₹3.2 L/yr - ₹7.2 L/yr |
Executive
172
salaries
| ₹1.9 L/yr - ₹6 L/yr |
Deputy Manager
101
salaries
| ₹6 L/yr - ₹12.2 L/yr |
Junior Executive
64
salaries
| ₹2 L/yr - ₹4.5 L/yr |
Super Smelters
Ashapura Group Of Industries
TRL Krosaki Refractories
MN Dastur & Company