i
Medhaj Techno Concept
Filter interviews by
I applied via Referral and was interviewed in Feb 2023. There were 2 interview rounds.
Phase to phase voltage of a LT line is typically 415 volts.
Phase to phase voltage of a LT line is usually 415 volts in a three-phase system
This voltage is commonly used for industrial and commercial applications
It is important to ensure proper insulation and safety measures when working with such high voltage
The fan consumes 4.17 Amps of current when connected to a single phase line.
The formula to calculate current is I = P / V, where P is power in watts and V is voltage in volts.
In this case, the fan consumes 500 watts of power and is connected to a single phase line with voltage typically around 120V.
Therefore, the current consumed by the fan is 500W / 120V = 4.17A.
Work, issues, problems, mistakes and how you rectify them
I applied via LinkedIn and was interviewed before Apr 2023. There was 1 interview round.
Lapelength is the measurement of the length of the lapel on a garment, typically a suit jacket or blazer.
Lapelength is an important factor in determining the overall look and style of a jacket.
It can vary depending on the design and cut of the jacket.
A shorter lapelength is often seen on more modern and trendy jackets, while a longer lapelength is more traditional.
The lapelength can also affect the perceived proportion
The standard size of a cube is determined by the industry or application it is being used for.
The size of a cube can vary depending on the industry or application it is used for
In construction, a standard size cube for testing concrete strength is 150mm x 150mm x 150mm
In gaming or design, a standard size cube may be smaller for ease of handling and manipulation
Normal mix is a standard mix of concrete while design mix is customized based on specific requirements.
Normal mix is a standard mix of concrete with fixed proportions of cement, sand, and aggregates.
Design mix is customized based on specific requirements like strength, durability, workability, etc.
Design mix is prepared by a mix design engineer using various tests and calculations.
Example: Normal mix for M20 grade conc...
Minimum Dia of chair bar is typically 6mm to 16mm depending on the structural requirements.
Chair bars are used to maintain the spacing between the main reinforcement bars in a concrete structure.
The minimum diameter of chair bars is usually between 6mm to 16mm, depending on the size and spacing of the main reinforcement bars.
The chair bars help to ensure proper concrete cover and prevent the main reinforcement bars fro...
Slump tests are conducted to measure the workability of concrete mix.
Slump tests help in determining the consistency and quality of concrete mix.
They are important in ensuring that the concrete can be easily placed and compacted.
Results of slump tests can indicate if adjustments need to be made to the mix design.
Common slump test methods include the standard slump test, modified slump test, and compacting factor test.
A transformer is an electrical device that transfers electrical energy from one circuit to another through electromagnetic induction.
Transformers work on the principle of electromagnetic induction
They have two coils, primary and secondary, wound around a magnetic core
When an alternating current flows through the primary coil, it creates a magnetic field which induces a voltage in the secondary coil
Transformers are used...
DTR (Dynamic Tension Regulation) structure materials include carbon fiber, Kevlar, and fiberglass.
DTR structure materials are used in high-performance applications where strength and durability are crucial.
Carbon fiber is a popular choice due to its high strength-to-weight ratio.
Kevlar is known for its excellent impact resistance and is often used in bulletproof vests.
Fiberglass is a cost-effective option that provides
Medhaj Techno Concept interview questions for popular designations
I applied via Company Website
To overcome risk factors in project execution, it is important to identify potential risks, create a risk management plan, monitor and control risks, and have contingency plans in place.
Identify potential risks by conducting a thorough risk assessment at the beginning of the project.
Create a risk management plan that outlines how each identified risk will be mitigated or managed.
Monitor and control risks throughout the...
Get interview-ready with Top Medhaj Techno Concept Interview Questions
I applied via Company Website and was interviewed in May 2022. There were 2 interview rounds.
Electrical Engineer post can prepare Power sector questions DTR structure LT Line HT line power distribution Cable size Conducter Pole etc
I applied via Referral and was interviewed before Feb 2023. There was 1 interview round.
A turnkey contractor is a company or individual that provides a complete project or service that is ready for immediate use by the client.
Turnkey contractors handle all aspects of a project from design to completion.
They deliver a fully functional product or service to the client without the client having to do any additional work.
Examples include construction companies that build and furnish a house before handing it ...
Testing for oil leakage in transformers involves visual inspection, oil analysis, and pressure testing.
Visual inspection of the transformer for any signs of oil leakage
Oil analysis to check for any abnormal levels of dissolved gases or contaminants
Pressure testing to check for any leaks in the transformer's oil-filled compartments
Use of ultrasonic testing to detect any leaks in the transformer's tank
Regular maintenance
I will conduct a thorough testing and inspection process to identify any errors in the Feeder.
Perform visual inspection of the Feeder
Conduct electrical testing to ensure proper functioning
Check for any loose connections or damaged components
Compare the Feeder's performance to the expected results
Review any error logs or system alerts
Consult with colleagues or experts for additional input
I applied via Referral and was interviewed before Oct 2022. There were 3 interview rounds.
A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.
Consists of two coils of wire, known as primary and secondary coils
Primary coil is connected to a power source, inducing a magnetic field
Magnetic field causes voltage to be induced in the secondary coil
Used to step up or step down voltage levels in electrical systems
Commonly used in power distributi
Top trending discussions
Some of the top questions asked at the Medhaj Techno Concept interview -
The duration of Medhaj Techno Concept interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 51 interviews
Interview experience
based on 758 reviews
Rating in categories
Senior Engineer
188
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
165
salaries
| ₹0 L/yr - ₹0 L/yr |
Field Engineer
135
salaries
| ₹0 L/yr - ₹0 L/yr |
Electrical Engineer
131
salaries
| ₹0 L/yr - ₹0 L/yr |
Site Engineer
100
salaries
| ₹0 L/yr - ₹0 L/yr |
TCS
Infosys
Wipro
HCLTech