Add office photos
Filter interviews by
Mahaveer Group Civil Site Engineer Interview Questions, Process, and Tips
Mahaveer Group Civil Site Engineer Interview Experiences
1 interview found
I applied via Walk-in and was interviewed in Oct 2023. There were 2 interview rounds.
(5 Questions)
- Q1. What is the LD for column
- Ans.
LD for column refers to Liquidated Damages for delay in completing the column construction.
LD stands for Liquidated Damages.
It is a predetermined amount of money that the contractor will pay to the client in case of delay in completing the project.
LD for column specifically refers to the amount of money that will be deducted for each day of delay in constructing the column.
The LD amount is usually mentioned in the cont...
- Q2. What is the mix ratio of m20 grade of concrete
- Ans.
The mix ratio of M20 grade of concrete is 1:1.5:3.
The mix ratio of M20 grade of concrete means the proportion of cement, sand, and aggregate used in the concrete mix.
For M20 grade concrete, the mix ratio is 1 part cement : 1.5 parts sand : 3 parts aggregate.
This means that for every 1 part of cement, 1.5 parts of sand, and 3 parts of aggregate are used.
For example, if you have 1 bag of cement (50 kg), you would need 1....
- Q3. What is the unit weight of steel
- Ans.
The unit weight of steel varies depending on its type and grade.
The unit weight of steel is typically measured in pounds per cubic foot (lb/ft³) or kilograms per cubic meter (kg/m³).
The unit weight of common structural steel ranges from 490 to 7850 pounds per cubic foot (7850 to 12600 kg/m³).
For example, the unit weight of mild steel is approximately 490 pounds per cubic foot (7850 kg/m³).
- Q4. What is the clear cover for beam
- Ans.
The clear cover for a beam is the distance between the outer surface of the beam and the nearest surface of the concrete cover.
Clear cover is important to protect the reinforcement from corrosion and fire.
The clear cover for beams is typically specified in construction drawings or codes.
The clear cover can vary depending on the type of beam and its exposure conditions.
For example, in a residential building, the clear c...
- Q5. What is the height of parapet wall
- Ans.
The height of a parapet wall varies depending on its purpose and location.
The height of a parapet wall is typically determined by building codes and regulations.
In residential buildings, parapet walls are usually around 3 feet tall to provide safety and privacy.
In commercial or industrial buildings, parapet walls can be higher to serve as a barrier against noise, wind, or to hide rooftop equipment.
Historical buildings ...
Interview Preparation Tips
Skills evaluated in this interview
Top trending discussions
Interview questions from similar companies
(2 Questions)
- Q1. What is the lap langth
- Ans.
Lap length is the amount of overlap required between two reinforcing bars in concrete structures.
Lap length ensures the transfer of load from one bar to another.
It is necessary to provide sufficient lap length to maintain the strength and integrity of the structure.
The lap length depends on factors such as the type of structure, bar diameter, and the grade of concrete.
For example, in a beam, the lap length is typically...
- Q2. What is the cover block size in colume
- Ans.
The cover block size in a column refers to the thickness of the concrete cover provided to the reinforcement bars.
The cover block size is typically specified in the construction drawings or as per the design requirements.
It is important to provide an adequate cover to protect the reinforcement from corrosion and ensure its durability.
The cover block size may vary depending on factors such as the type of structure, expo...
Civil Site Engineer Interview Questions & Answers
Arihant Superstructures
Anonymous
posted on 9 Oct 2021
I applied via Referral and was interviewed in Sep 2021. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. ,how to build high rise buildings
- Ans.
High rise buildings require careful planning, design, and construction techniques.
Site selection and analysis
Structural design and analysis
Foundation design and construction
Use of high-strength materials
Installation of elevators and other building systems
Safety measures for workers and occupants
Quality control and testing
Regular maintenance and inspections
Interview Preparation Tips
I applied via Company Website and was interviewed before Jun 2021. There was 1 interview round.
(1 Question)
- Q1. Compressive strength of 1st class brick.
- Ans.
The compressive strength of 1st class brick is typically around 10-14 N/mm².
Compressive strength refers to the maximum load a brick can withstand before it breaks under compression.
1st class bricks are high-quality bricks that are used for load-bearing structures.
The compressive strength of 1st class brick is usually between 10-14 N/mm².
This strength ensures the brick can withstand the weight and pressure exerted on it
Interview Preparation Tips
I applied via Approached by Company and was interviewed in Sep 2023. There were 3 interview rounds.
STEEL WEIGHT, BBS,COVER BLOCK
(1 Question)
- Q1. LAYOUT, DRAWING READING
Interview Preparation Tips
Selected
I applied via Referral and was interviewed in Aug 2023. There were 3 interview rounds.
(2 Questions)
- Q1. About yourself and introduce yourself
- Q2. Why are you leaving current company
(3 Questions)
- Q1. Aac block size bounding material
- Q2. Mivan questions and external plaster
- Q3. Slump cone and cube testing
Interview Preparation Tips
Civil Site Engineer Interview Questions & Answers
Arihant Superstructures
Anonymous
posted on 9 Oct 2021
I applied via Referral and was interviewed in Sep 2021. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. ,how to build high rise buildings
- Ans.
High rise buildings require careful planning, design, and construction techniques.
Site selection and analysis
Structural design and analysis
Foundation design and construction
Use of high-strength materials
Installation of elevators and other building systems
Safety measures for workers and occupants
Quality control and testing
Regular maintenance and inspections
Interview Preparation Tips
I applied via Company Website and was interviewed before Jun 2021. There was 1 interview round.
(1 Question)
- Q1. Compressive strength of 1st class brick.
- Ans.
The compressive strength of 1st class brick is typically around 10-14 N/mm².
Compressive strength refers to the maximum load a brick can withstand before it breaks under compression.
1st class bricks are high-quality bricks that are used for load-bearing structures.
The compressive strength of 1st class brick is usually between 10-14 N/mm².
This strength ensures the brick can withstand the weight and pressure exerted on it
Interview Preparation Tips
I applied via Company Website and was interviewed before Dec 2020. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. Construction work relativ , Drawing relative, Execution Work ,steel work, shutting work, planning, ke relative questions
Interview Preparation Tips
(2 Questions)
- Q1. What is the lap langth
- Ans.
Lap length is the amount of overlap required between two reinforcing bars in concrete structures.
Lap length ensures the transfer of load from one bar to another.
It is necessary to provide sufficient lap length to maintain the strength and integrity of the structure.
The lap length depends on factors such as the type of structure, bar diameter, and the grade of concrete.
For example, in a beam, the lap length is typically...
- Q2. What is the cover block size in colume
- Ans.
The cover block size in a column refers to the thickness of the concrete cover provided to the reinforcement bars.
The cover block size is typically specified in the construction drawings or as per the design requirements.
It is important to provide an adequate cover to protect the reinforcement from corrosion and ensure its durability.
The cover block size may vary depending on factors such as the type of structure, expo...
Mahaveer Group Interview FAQs
Tell us how to improve this page.
Mahaveer Group Interviews By Designations
- Mahaveer Group B E Civil Engineer Interview Questions
- Mahaveer Group Civil Site Engineer Interview Questions
- Mahaveer Group Executive Accountant Interview Questions
- Mahaveer Group Project Engineer Interview Questions
- Mahaveer Group Sales & Marketing Interview Questions
- Mahaveer Group Senior Accounts Executive Interview Questions
- Mahaveer Group Senior Purchase Executive Interview Questions
Interview Questions for Popular Designations
- Civil Site Supervisor Interview Questions
- Civil Engineer Interview Questions
- Senior Civil Site Engineer Interview Questions
- Junior Engineer Civil Interview Questions
- Senior Civil Engineer Interview Questions
- Site Engineer Interview Questions
- Civil Foreman Interview Questions
- Civil Supervisor Interview Questions
- Show more
Mahaveer Group Civil Site Engineer Interview Process
based on 1 interview
Interview experience
Civil Site Engineer Interview Questions from Similar Companies
Mahaveer Group Civil Site Engineer Reviews and Ratings
based on 2 reviews
Rating in categories
|
Assistant Manager
13
salaries
|  ₹4.5 L/yr - ₹6 L/yr |
|
Senior Executive - Stores
9
salaries
| ₹3 L/yr - ₹3.7 L/yr |
|
Site Engineer
8
salaries
| ₹3.8 L/yr - ₹4.8 L/yr |
|
Project Engineer
8
salaries
| ₹3.6 L/yr - ₹5 L/yr |
|
Project Manager
7
salaries
| ₹4.5 L/yr - ₹9 L/yr |
Prestige Group
Sobha
Brigade Group
Godrej Properties
- Home >
- Interviews >
- Mahaveer Group Interview Questions >
- Mahaveer Group Civil Site Engineer Interview Questions
