Upload Button Icon Add office photos

Filter interviews by

Lucas-TVS Design Engineer Interview Questions and Answers

Updated 28 Nov 2024

Lucas-TVS Design Engineer Interview Experiences

2 interviews found

I applied via Recruitment Consultant and was interviewed in Jul 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. APQP,PPAP,DFMEA,GD&T, MATERIAL KNOWLEDGE & APPLICATION,PROCESS DEVELOPMENT KNOWLEDGE, PROFICIENCY ON CREO

Interview Preparation Tips

Interview preparation tips for other job seekers - Be Confident what you are answering and accept if you don't the answer correctly.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Face to face interview
  • Q2. About previous projects
  • Q3. Detailed questions about specific project
Round 2 - Tool test 

(1 Question)

  • Q1. Fixture concept desigh

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
No response

I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Sheet metal defects?
  • Q2. What is k factor in sheet metal?
  • Ans. 

    K factor in sheet metal is a constant representing the ratio of the location of the neutral axis to the material thickness.

    • K factor determines how much a sheet metal part will stretch during bending.

    • It is used in calculating the bend allowance, bend deduction, and other bending-related calculations.

    • K factor values vary depending on the material type, thickness, and bending method.

    • For example, a K factor of 0.5 means th...

  • Answered by AI
  • Q3. Plastic molding machine?
  • Q4. Prevention plastic defects
Round 3 - Technical 

(5 Questions)

  • Q1. What is the role of npd person in industry?
  • Ans. 

    NPD person plays a crucial role in industry by leading the development of new products from concept to launch.

    • Responsible for identifying market opportunities and consumer needs

    • Leads cross-functional teams to develop new products

    • Coordinates with various departments such as marketing, engineering, and manufacturing

    • Manages the product development process from concept to commercialization

    • Ensures products meet quality stan...

  • Answered by AI
  • Q2. How to solve manufacturing issue?
  • Ans. 

    To solve a manufacturing issue, identify the root cause, brainstorm solutions, implement changes, and monitor results.

    • Identify the root cause of the issue by analyzing data and conducting tests.

    • Brainstorm potential solutions with a cross-functional team to gather diverse perspectives.

    • Implement changes based on the chosen solution, considering cost, time, and resources.

    • Monitor the results of the changes to ensure they e...

  • Answered by AI
  • Q3. What is current & voltage?
  • Ans. 

    Current is the flow of electric charge in a circuit, measured in Amperes (A). Voltage is the electrical potential difference between two points in a circuit, measured in Volts (V).

    • Current is the rate of flow of electric charge in a circuit

    • Voltage is the electrical potential difference between two points in a circuit

    • Current is measured in Amperes (A)

    • Voltage is measured in Volts (V)

    • Ohm's Law relates current, voltage, and

  • Answered by AI
  • Q4. Cad test on creo software version 7.0? 45 min cad test complete timing?
  • Q5. Written interview? 45 min. If any person are required this written interview test paper. Pls mail. My mail id is- *****

Interview Preparation Tips

Topics to prepare for UNO Minda Design Engineer interview:
  • New Product Development
  • Creo
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Explain various GD&T
  • Ans. 

    Geometric Dimensioning and Tolerancing (GD&T) is a system for defining and communicating engineering tolerances.

    • GD&T is used to specify the allowable variations in form, size, and orientation of features on a part.

    • It uses symbols, such as concentricity, flatness, and perpendicularity, to communicate the desired tolerances.

    • GD&T helps ensure that parts fit together properly and function as intended.

    • Examples of GD&T symbo...

  • Answered by AI
  • Q2. Explain DFM, DFS, DFA
  • Ans. 

    DFM, DFS, and DFA stand for Design for Manufacturing, Design for Service, and Design for Assembly, respectively.

    • DFM focuses on designing products that are easy and cost-effective to manufacture.

    • DFS focuses on designing products that are easy to service and maintain.

    • DFA focuses on designing products that are easy to assemble.

    • Consideration of DFM, DFS, and DFA principles can lead to more efficient and cost-effective prod...

  • Answered by AI

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Tough one to attempt

Round 2 - Technical 

(1 Question)

  • Q1. Asked questions related to few mechanical engineering topics
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Written test related to casting and plastic

Round 3 - Technical 

(1 Question)

  • Q1. Related to experience
Round 4 - HR 

(1 Question)

  • Q1. Expectation and why you want tomove

Interview Preparation Tips

Interview preparation tips for other job seekers - Good opportunity to work with valeo

Interview Questionnaire 

2 Questions

  • Q1. Sheetmetal manufactring process
  • Q2. Gd&t
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Feb 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Aptitude Test 

Test contain basic questions regarding engineering.

Round 3 - Technical 

(1 Question)

  • Q1. Questions were asked from resume. Question were related to my projects from engineering. other questions were related to concepts used in my projects.
Round 4 - HR 

(1 Question)

  • Q1. Asked about the company. other question was regarding my future vision about my career.

Interview Preparation Tips

Interview preparation tips for other job seekers - Build a good and strong resume. Show your best qualities.

Interview Questionnaire 

1 Question

  • Q1. 1.Tolerance types 2.Where to apply Statistical TOL Stack Up 3.More Problems in Tolerance Stack up -Finding Minimum and Maximum Distance to fit a part in an Assembly & other basic Questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn GD&T -It's Application and Knowledge is very Important as a Design Engineer, If not you will be just a Modelling person
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Fully technical based on resume
Round 3 - Technical 

(1 Question)

  • Q1. Nothing to share now
Round 4 - HR 

(1 Question)

  • Q1. He is very basic only salary negotiation

Lucas-TVS Interview FAQs

How many rounds are there in Lucas-TVS Design Engineer interview?
Lucas-TVS interview process usually has 2 rounds. The most common rounds in the Lucas-TVS interview process are Technical.
How to prepare for Lucas-TVS Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Lucas-TVS. The most common topics and skills that interviewers at Lucas-TVS expect are Ansys, 3D Modeling, CAD, CATIA and CATIA V5.
What are the top questions asked in Lucas-TVS Design Engineer interview?

Some of the top questions asked at the Lucas-TVS Design Engineer interview -

  1. APQP,PPAP,DFMEA,GD&T, MATERIAL KNOWLEDGE & APPLICATION,PROCESS DEVELOPMENT KNOW...read more
  2. Fixture concept des...read more

Tell us how to improve this page.

People are getting interviews through

based on 2 Lucas-TVS interviews
Recruitment Consultant
50%
50% candidates got the interview through other sources.
Moderate Confidence
?
Moderate Confidence means the data is based on a sufficient number of responses received from the candidates
Lucas-TVS Design Engineer Salary
based on 78 salaries
₹2 L/yr - ₹7.2 L/yr
6% less than the average Design Engineer Salary in India
View more details

Lucas-TVS Design Engineer Reviews and Ratings

based on 9 reviews

3.2/5

Rating in categories

3.8

Skill development

3.1

Work-Life balance

2.4

Salary & Benefits

3.9

Job Security

2.9

Company culture

2.9

Promotions/Appraisal

3.4

Work Satisfaction

Explore 9 Reviews and Ratings
Quality Engineer
208 salaries
unlock blur

₹1 L/yr - ₹6.5 L/yr

Engineer
192 salaries
unlock blur

₹3.1 L/yr - ₹7.1 L/yr

Senior Engineer
167 salaries
unlock blur

₹4.2 L/yr - ₹10.3 L/yr

Production Engineer
159 salaries
unlock blur

₹1 L/yr - ₹8 L/yr

Assistant Engineer
90 salaries
unlock blur

₹2.5 L/yr - ₹5.3 L/yr

Explore more salaries
Compare Lucas-TVS with

Bosch

4.2
Compare

UNO Minda

4.0
Compare

Amara Raja Energy & Mobility

4.2
Compare

Exide Industries

3.5
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview