Filter interviews by
I applied via Company Website and was interviewed in May 2023. There were 3 interview rounds.
Top trending discussions
I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.
I applied via Walk-in and was interviewed before Sep 2020. There was 1 interview round.
Yes, I am fit for the post of Quality Engineer.
I have a strong background in quality engineering with experience in implementing quality control processes.
I am skilled in conducting quality audits and inspections to identify areas for improvement.
I have expertise in using quality tools and methodologies such as Six Sigma and Lean principles.
I have successfully led cross-functional teams to resolve quality issues and im...
I am a detail-oriented Quality Engineer with a strong background in ensuring product quality and process improvement.
Experienced in conducting quality audits and inspections
Proficient in using statistical analysis tools to identify and resolve quality issues
Skilled in developing and implementing quality control procedures
Strong problem-solving and analytical skills
Excellent communication and teamwork abilities
I tend to procrastinate and sometimes struggle with time management.
Procrastination
Time management
Difficulty prioritizing tasks
Occasional lack of focus
posted on 19 Jan 2021
I was interviewed in Jul 2020.
I have achieved several milestones throughout my career as a Senior Engineer.
Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.
Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.
Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...
posted on 1 Jun 2020
I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.
Die casting and machining defects are common in manufacturing processes.
Die casting defects include porosity, shrinkage, cold shuts, and flash.
Machining defects include burrs, chatter marks, and tool marks.
Die casting defects can be caused by improper temperature, pressure, or metal flow.
Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.
Defects can lead to part failure, reduced
Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.
Filling and high speed ratio formula is V/Q
V is the volume of the container and Q is the flow rate of the liquid
The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate
The higher the flow rate, the faster the c
posted on 26 May 2020
I applied via Walk-in and was interviewed in Apr 2020. There were 3 interview rounds.
The 7 QC tools are a set of basic quality control tools used to identify and solve quality problems.
Check sheets
Control charts
Histograms
Pareto charts
Scatter diagrams
Stratification
Cause-and-effect diagrams
As a Quality Engineer in my previous company, I was responsible for ensuring product quality, conducting audits, and implementing quality control processes.
Conducted product quality inspections and audits
Implemented quality control processes to improve product quality
Analyzed data to identify areas for improvement
Collaborated with cross-functional teams to address quality issues
Ensured compliance with industry standard
QA focuses on preventing defects while QC focuses on identifying and fixing defects.
QA is a proactive process that involves planning, designing, and executing tests to prevent defects from occurring.
QC is a reactive process that involves identifying defects through testing and then fixing them.
QA is focused on the entire software development life cycle while QC is focused on the testing phase.
Examples of QA activities ...
I was interviewed before Apr 2021.
Toe in and toe out are terms used to describe the angle of the wheels on a vehicle.
Toe in refers to the front of the wheels being closer together than the back of the wheels.
Toe out refers to the front of the wheels being further apart than the back of the wheels.
Toe in/out can affect the handling and tire wear of a vehicle.
Proper alignment is important for safety and optimal performance.
Wheel balancing is the process of equalizing the weight of a tire and wheel assembly so that it spins smoothly at high speeds.
It involves adding or removing weights to the wheel to balance it
Unbalanced wheels can cause vibrations, uneven tire wear, and steering issues
It is important to balance wheels regularly, especially after getting new tires or wheels
Examples of wheel balancing equipment include wheel balancers and
Caster camber angle is the angle between the vertical axis of the wheel and the steering axis.
It affects the stability and handling of the vehicle.
Caster angle helps in straight-line stability and steering returnability.
Camber angle helps in tire wear and cornering ability.
Welding defects are imperfections that occur during the welding process.
Common welding defects include porosity, undercutting, and incomplete fusion.
Porosity is caused by gas pockets trapped in the weld, while undercutting is a groove at the base of the weld.
Incomplete fusion occurs when the weld metal does not fuse completely with the base metal.
Welding defects can weaken the weld and compromise its integrity.
Quality ...
Vernier caliper least count is the smallest measurement that can be read on the scale of the caliper.
The least count of a Vernier caliper is usually 0.02 mm or 0.05 mm.
It is determined by dividing the smallest division on the main scale by the number of divisions on the Vernier scale.
For example, if the smallest division on the main scale is 1 mm and there are 20 divisions on the Vernier scale, the least count would be
The type of welding used depends on the material being welded and the desired strength of the joint.
Common types of welding include MIG, TIG, stick, and flux-cored welding.
MIG welding is often used for welding aluminum and steel.
TIG welding is commonly used for welding thin materials and for precision welding.
Stick welding is often used for welding thicker materials and in outdoor environments.
Flux-cored welding is sim...
What your view on alcohol and alcohol bane or not and why
posted on 19 May 2021
I applied via Naukri.com and was interviewed in Nov 2020. There were 4 interview rounds.
posted on 5 Dec 2021
I applied via Referral and was interviewed before Dec 2020. There was 1 interview round.
Quality is a crucial aspect of any product or service in the present times.
Quality is a key factor in customer satisfaction and loyalty.
Quality control measures ensure that products meet the required standards.
Quality assurance processes help in identifying and addressing potential issues before they become major problems.
Quality management systems like Six Sigma and Lean help in improving overall quality and efficienc...
based on 1 interview
Interview experience
based on 24 reviews
Rating in categories
Assistant Engineer
412
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
287
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
224
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
180
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
143
salaries
| ₹0 L/yr - ₹0 L/yr |
Rane Holdings
Sundaram Clayton
Samvardhana Motherson Group
Bharat Forge