Upload Button Icon Add office photos

L.G.Balakrishnan & Bros

Compare button icon Compare button icon Compare

Filter interviews by

L.G.Balakrishnan & Bros Quality Engineer Interview Questions and Answers

Updated 9 Jan 2025

L.G.Balakrishnan & Bros Quality Engineer Interview Experiences

4 interviews found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Introduce yourself ?
  • Q2. What you know quality?
  • Ans. 

    Quality is the measure of excellence or superiority of a product or service based on customer requirements and satisfaction.

    • Quality is meeting or exceeding customer expectations

    • It involves consistency, reliability, and conformance to requirements

    • Quality is achieved through continuous improvement and prevention of defects

    • Quality can be measured using metrics such as defect rate, customer satisfaction, and on-time delive...

  • Answered by AI
  • Q3. Which instrument use to check parameters and improve quality?
  • Ans. 

    Calipers, micrometers, gauges, and CMMs are commonly used instruments to check parameters and improve quality.

    • Calipers are used to measure the distance between two opposite sides of an object.

    • Micrometers are used to measure very small distances or thicknesses.

    • Gauges are used to measure various parameters such as pressure, temperature, or dimensions.

    • Coordinate Measuring Machines (CMMs) are used to measure the physical g

  • Answered by AI
Round 3 - One-on-one 

(2 Questions)

  • Q1. Your comfortable to work here?
  • Q2. Within five year which position you think in these places

Interview Preparation Tips

Interview preparation tips for other job seekers - Share answer correctly and you have no knowledge for any questions directly discussion to interview person
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jan 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

Mean , median , mode
Average,

Round 2 - HR 

(1 Question)

  • Q1. General self introduction
Round 3 - Technical 

(2 Questions)

  • Q1. SPC, 7 QC, Why why analysis, action plan
  • Q2. Current role & responsibility
  • Ans. 

    I am currently working as a Quality Engineer at XYZ Company.

    • Responsible for ensuring product quality meets standards

    • Conducting quality inspections and audits

    • Implementing quality control procedures

    • Analyzing data to identify areas for improvement

  • Answered by AI
Round 4 - Group Discussion 

Case study of defect occurred

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well & seek in resume

Quality Engineer Interview Questions Asked at Other Companies

asked in MM AUTO
Q1. What is MSA and addition of msa version, type of msa ,what differ ... read more
asked in MM AUTO
Q2. What is 7 QC tool,parito analysis,xchart and r chart explain ,why ... read more
Q3. If a monkey eat 6 apples more than the previous day and complete ... read more
Q4. What is the Physical & Chemical test of Steel Reinforcement?
asked in MM AUTO
Q5. what is IATF audit , cause of IATF , relationship between for IAT ... read more

I applied via Walk-in and was interviewed in Oct 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Tell me about yourself About company About final year project Questions like IATF9001-2008 CORE TOOLS

Interview Preparation Tips

Topics to prepare for L.G.Balakrishnan & Bros Quality Engineer interview:
  • Strength of materials
  • Lean Manufacturing
  • Design of transmission system
Interview preparation tips for other job seekers - Be very strong at engineering fundamentals and terminologies

I applied via Recruitment Consultant and was interviewed in Sep 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Basics of quality assurance
  • Q2. Ppap process and kaizen implementation

Interview Preparation Tips

Interview preparation tips for other job seekers - Preparation of basic quality tool and procedures . Ppap process and control plan preparations, usage of instruments

L.G.Balakrishnan & Bros interview questions for designations

 Junior Quality Engineer

 (1)

 Assistant Quality Engineer

 (1)

 Quality Inspector

 (1)

 Quality Assurance/Quality Control Manager

 (1)

 CMM Operator and Quality Engineer

 (1)

 Production Engineer

 (4)

 Assistant Engineer

 (2)

 Apprentice Engineer

 (1)

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed before Feb 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. 1. Tell me about yourself?
  • Q2.  2. Explain about your project and what was your role in it?

Interview Preparation Tips

Interview preparation tips for other job seekers - I attended interview through job consultancy. I attended only HR round which was first round and I didn't attend technical round as the Quality engineer vacancy was actually for diploma people.

I applied via Recruitment Consultant and was interviewed before Oct 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Seven QC tools
  • Ans. 

    Seven QC tools are a set of basic quality control tools used to identify and solve quality problems.

    • Check sheets

    • Control charts

    • Histograms

    • Pareto charts

    • Scatter diagrams

    • Stratification

    • Cause-and-effect diagrams

  • Answered by AI
  • Q2. Pareto Analysis

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare for discussions well in advance. If you do not know the answer please say NO.

Interview Questionnaire 

7 Questions

  • Q1. What is SPC ? explain briefly.
  • Ans. 

    SPC stands for Statistical Process Control. It is a method of quality control that uses statistical methods to monitor and control a process.

    • SPC involves collecting and analyzing data to identify and reduce variation in a process

    • It helps to ensure that a process is operating within its specified limits and is capable of producing consistent results

    • Examples of SPC tools include control charts, histograms, and Pareto cha...

  • Answered by AI
  • Q2. What is corrective action and preventive action?
  • Ans. 

    Corrective action is taken to address and resolve existing problems, while preventive action is taken to prevent potential problems from occurring.

    • Corrective action focuses on addressing and resolving existing problems or nonconformities.

    • Preventive action focuses on identifying and eliminating potential problems before they occur.

    • Corrective action is reactive, while preventive action is proactive.

    • Corrective action aims...

  • Answered by AI
  • Q3. Whow would you describe yourself?
  • Ans. 

    I am a detail-oriented Quality Engineer with a passion for continuous improvement and problem-solving.

    • Detail-oriented with a focus on quality standards

    • Passionate about continuous improvement

    • Skilled in problem-solving and root cause analysis

  • Answered by AI
  • Q4. Explain steps for demin wheels.
  • Ans. 

    The steps for demin wheels involve cleaning, inspecting, repairing, and testing.

    • Clean the wheels thoroughly to remove any dirt or debris.

    • Inspect the wheels for any damage or defects.

    • Repair any issues found, such as replacing worn-out parts or fixing cracks.

    • Test the wheels to ensure they meet quality standards and perform as expected.

  • Answered by AI
  • Q5. What is hardness?Explain briefly
  • Ans. 

    Hardness is the measure of a material's resistance to indentation or scratching.

    • Hardness is a property of materials that determines their ability to withstand deformation

    • It is often measured using tests like the Rockwell, Brinell, or Vickers hardness tests

    • Hardness can be influenced by factors such as the material's composition, heat treatment, and microstructure

    • Higher hardness generally indicates greater strength and d...

  • Answered by AI
  • Q6. How to upgrade suppliers?
  • Ans. 

    To upgrade suppliers, establish clear quality standards, conduct regular audits, provide feedback and support for improvement, and consider alternative suppliers.

    • Establish clear quality standards and communicate them to suppliers

    • Conduct regular audits to assess supplier performance and identify areas for improvement

    • Provide feedback and support to suppliers to help them meet quality standards

    • Consider alternative supplie...

  • Answered by AI
  • Q7. Supplier selection criteria.
  • Ans. 

    Supplier selection criteria are the factors and considerations used to evaluate and choose suppliers for a company's procurement needs.

    • Quality and reliability of products or services

    • Supplier's financial stability and ability to meet demand

    • Supplier's track record and reputation

    • Cost and pricing

    • Supplier's location and proximity to the company

    • Supplier's compliance with industry standards and regulations

    • Supplier's capacity ...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: resume should be to the point and should include what work had you done in past

Interview Questionnaire 

4 Questions

  • Q1. Personal and functional
  • Q2. About your job description and processes and your achievements
  • Q3. Your plus and minus
  • Q4. Senior Management Intraction on the basis of personal, behavioral, backgrounds,job function and achievements.

I applied via Referral and was interviewed before Dec 2020. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. Quality relative present
  • Ans. 

    Quality is a crucial aspect of any product or service in the present times.

    • Quality is a key factor in customer satisfaction and loyalty.

    • Quality control measures ensure that products meet the required standards.

    • Quality assurance processes help in identifying and addressing potential issues before they become major problems.

    • Quality management systems like Six Sigma and Lean help in improving overall quality and efficienc...

  • Answered by AI
  • Q2. Quality related
  • Q3. Quality mein kaun kaun se tool use karte hain
  • Q4. Quality ke gas
  • Q5.  year ke bare mein

Interview Preparation Tips

Interview preparation tips for other job seekers - Government Polytechnic Bijnor Rudrapur quality endurance limited company

I applied via Naukri.com and was interviewed before Nov 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. PPAP 7QC Tools, FMEA, all the basic documentation
Round 3 - One-on-one 

(1 Question)

  • Q1. Manager round about experience and skills

Interview Preparation Tips

Interview preparation tips for other job seekers - Documentation should be get prepared and process understanding is important

L.G.Balakrishnan & Bros Interview FAQs

How many rounds are there in L.G.Balakrishnan & Bros Quality Engineer interview?
L.G.Balakrishnan & Bros interview process usually has 3 rounds. The most common rounds in the L.G.Balakrishnan & Bros interview process are Technical, Resume Shortlist and One-on-one Round.
What are the top questions asked in L.G.Balakrishnan & Bros Quality Engineer interview?

Some of the top questions asked at the L.G.Balakrishnan & Bros Quality Engineer interview -

  1. Which instrument use to check parameters and improve quali...read more
  2. What you know quali...read more
  3. SPC, 7 QC, Why why analysis, action p...read more

Tell us how to improve this page.

L.G.Balakrishnan & Bros Quality Engineer Interview Process

based on 3 interviews

Interview experience

4.3
  
Good
View more
L.G.Balakrishnan & Bros Quality Engineer Salary
based on 218 salaries
₹1.2 L/yr - ₹4.7 L/yr
20% less than the average Quality Engineer Salary in India
View more details

L.G.Balakrishnan & Bros Quality Engineer Reviews and Ratings

based on 43 reviews

3.2/5

Rating in categories

3.6

Skill development

3.7

Work-life balance

2.8

Salary

4.2

Job security

3.1

Company culture

2.9

Promotions

3.2

Work satisfaction

Explore 43 Reviews and Ratings
Assistant Engineer
411 salaries
unlock blur

₹1.6 L/yr - ₹4.5 L/yr

Engineer
317 salaries
unlock blur

₹1.9 L/yr - ₹5 L/yr

Quality Engineer
218 salaries
unlock blur

₹1.2 L/yr - ₹4.7 L/yr

Production Engineer
181 salaries
unlock blur

₹1.2 L/yr - ₹6 L/yr

Senior Engineer
144 salaries
unlock blur

₹3 L/yr - ₹7 L/yr

Explore more salaries
Compare L.G.Balakrishnan & Bros with

JBM Group

4.0
Compare

Subros

3.8
Compare

Ceat Tyres

4.0
Compare

UNO Minda

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview