Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Larsen & Toubro Limited Team. If you also belong to the team, you can get access from here

Larsen & Toubro Limited Verified Tick

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Larsen & Toubro Limited ITI Fitter Interview Questions and Answers

Updated 30 Jan 2024

Larsen & Toubro Limited ITI Fitter Interview Experiences

3 interviews found

ITI Fitter Interview Questions & Answers

user image Anonymous

posted on 30 Jan 2024

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Iti machinations

ITI Fitter Interview Questions & Answers

user image Anonymous

posted on 28 Feb 2022

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Case Study 

Knowledge

Interview Preparation Tips

Interview preparation tips for other job seekers - my dream is to maintain it in laseron turbo

ITI Fitter Interview Questions Asked at Other Companies

asked in Tata Motors
Q1. Whow many types of gear available
Q2. What is the least count of vernier caliper
asked in Tata Steel
Q3. what is hammer?& ball pin hammer?
Q4. How many types of Leth machines are there?
asked in Tata Motors
Q5. What is a fitter

ITI Fitter Interview Questions & Answers

user image Anonymous

posted on 4 Sep 2021

Interview Questionnaire 

1 Question

  • Q1. Tell me little about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Do you homework Say thank you

Interview questions from similar companies

I appeared for an interview before Jul 2016.

Interview Questionnaire 

2 Questions

  • Q1. Non technical as a math Gk and about me
  • Q2. Introduction

Interview Preparation Tips

Round: Test
Experience: My test scores is totall 57 number
Total Questions: 70

Round: HR Interview
Experience: My test scores is totall 57 number
Tips: At this must required your Confident

Engineer Interview Questions & Answers

TCE user image Anonymous

posted on 25 Feb 2015

Interview Questionnaire 

1 Question

  • Q1. Questions were from bending moment and shear force diagrams;

Interview Preparation Tips

Round: Test
Experience: Technical (Structural engineering questions only) and aptitude test

Round: Technical Interview
Tips: Questions on Earthquake engineering, structural dynamics,Design of RC and steel structures can also be asked.

Round: HR Interview
Experience: HR interview is trivial if you are selected through technical interview.

General Tips: Technical/aptitude test and technical interview had maximum weightage. If you crack it the best way, you are in!
Skill Tips: CGPA does not help much. Internship, project etc. questions were not asked.
Skills: Aptitude skills, Technical skills, Designing skills
College Name: IIT MADRAS

I applied via LinkedIn and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical

Interview Preparation Tips

Interview preparation tips for other job seekers - Have technical knowledge. Learn the basic of your field.

I applied via Walk-in and was interviewed before Nov 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Tower cranes erection,batching plant maintenance and electrical safety
  • Q2. Ok normal

Interview Preparation Tips

Interview preparation tips for other job seekers - Normal not tough

I applied via Walk-in and was interviewed before Aug 2019. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Tell daily maintenance schedules of machineries
  • Ans. 

    Daily maintenance schedules of machineries

    • Check oil levels and top up if necessary

    • Inspect and clean filters

    • Check for any signs of wear and tear

    • Lubricate moving parts

    • Check for any leaks or unusual noises

    • Perform any necessary repairs or replacements

    • Keep a record of maintenance performed

  • Answered by AI
  • Q2. Tell how many types of oils uses in construction machinery
  • Ans. 

    Construction machinery uses various types of oils depending on their functions.

    • There are different types of oils used in construction machinery such as engine oil, hydraulic oil, gear oil, transmission oil, and brake oil.

    • Engine oil is used to lubricate the engine and prevent wear and tear.

    • Hydraulic oil is used to transfer power in hydraulic systems.

    • Gear oil is used to lubricate gears and bearings in gearboxes.

    • Transmiss...

  • Answered by AI
  • Q3. How to repair hydraulic pump?
  • Ans. 

    To repair a hydraulic pump, first identify the problem and then disassemble the pump to replace or repair the faulty parts.

    • Identify the problem by checking for leaks, unusual noises, or loss of pressure.

    • Disassemble the pump carefully, taking note of the order of parts and any seals or gaskets.

    • Inspect the parts for damage or wear, and replace any faulty components.

    • Reassemble the pump, making sure all parts are properly ...

  • Answered by AI
  • Q4. What is the reason of engine failure ?
  • Ans. 

    Engine failure can be caused by various factors such as overheating, lack of maintenance, wear and tear, and manufacturing defects.

    • Overheating due to lack of coolant or oil

    • Lack of maintenance such as not changing oil or air filters

    • Wear and tear of engine components such as pistons, bearings, and valves

    • Manufacturing defects such as faulty parts or poor assembly

    • Fuel contamination or incorrect fuel usage

    • Improper installat...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Tough

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Group Discussion 
Pro Tip by AmbitionBox:
Don’t treat group discussions as an argument. Group discussion is about reaching a meaningful conclusion.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What are the common welding process?
  • Ans. 

    Common welding processes include MIG, TIG, Stick, and Flux-Cored welding.

    • MIG (Metal Inert Gas) welding uses a wire electrode and shielding gas to join metal.

    • TIG (Tungsten Inert Gas) welding uses a tungsten electrode and filler metal to join metal.

    • Stick welding uses a consumable electrode coated in flux to join metal.

    • Flux-Cored welding uses a wire electrode with a flux core to join metal.

    • Other common welding processes i...

  • Answered by AI
  • Q2. What are the tests conducted on welding joints?
  • Ans. 

    Tests conducted on welding joints

    • Visual inspection

    • Dye penetrant testing

    • Radiographic testing

    • Ultrasonic testing

    • Magnetic particle testing

    • Tensile testing

    • Bend testing

  • Answered by AI
  • Q3. What is submerged arc welding process?
  • Ans. 

    Submerged arc welding is a process where an arc is maintained between a consumable electrode and the workpiece under a blanket of granular flux.

    • The process is used for welding thick sections of steel.

    • The granular flux shields the weld from atmospheric contamination.

    • The consumable electrode is continuously fed into the weld pool.

    • The process is commonly used in shipbuilding, pipeline construction, and pressure vessel fab

  • Answered by AI
  • Q4. Procedure of rectification for defected welding joints?
  • Ans. 

    Defected welding joints can be rectified through a process of cutting, grinding, and rewelding.

    • Identify the type and extent of the defect

    • Cut out the defected portion of the joint

    • Grind the edges of the remaining joint to prepare for rewelding

    • Reweld the joint using appropriate welding techniques and materials

    • Perform non-destructive testing to ensure the quality of the repaired joint

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Go for meil you can experience a great environment and learning platform
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Mar 2022. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Current role and responsibilities

Interview Preparation Tips

Topics to prepare for Tata Technologies Engineer interview:
  • Automotive Engineering
  • Functional Testing

Larsen & Toubro Limited Interview FAQs

How many rounds are there in Larsen & Toubro Limited ITI Fitter interview?
Larsen & Toubro Limited interview process usually has 1-2 rounds. The most common rounds in the Larsen & Toubro Limited interview process are Resume Shortlist, Case Study and Technical.

Tell us how to improve this page.

Larsen & Toubro Limited ITI Fitter Interview Process

based on 2 interviews

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Tata Projects Interview Questions
4.2
 • 438 Interviews
Tata Technologies Interview Questions
3.6
 • 260 Interviews
TCE Interview Questions
3.8
 • 248 Interviews
Saint-Gobain Interview Questions
4.0
 • 173 Interviews
Dilip Buildcon Interview Questions
4.0
 • 142 Interviews
View all
Larsen & Toubro Limited ITI Fitter Salary
based on 64 salaries
₹1 L/yr - ₹3.6 L/yr
14% less than the average ITI Fitter Salary in India
View more details

Larsen & Toubro Limited ITI Fitter Reviews and Ratings

based on 30 reviews

3.7/5

Rating in categories

3.6

Skill development

3.4

Work-life balance

3.6

Salary

3.5

Job security

3.7

Company culture

3.9

Promotions

3.6

Work satisfaction

Explore 30 Reviews and Ratings
Assistant Manager
3.9k salaries
unlock blur

₹6.5 L/yr - ₹18.5 L/yr

Senior Engineer
3.5k salaries
unlock blur

₹4.5 L/yr - ₹12.5 L/yr

Engineer
1.2k salaries
unlock blur

₹1.6 L/yr - ₹9.3 L/yr

Manager
1.1k salaries
unlock blur

₹9.3 L/yr - ₹30 L/yr

Assistant Construction Manager
1k salaries
unlock blur

₹6 L/yr - ₹21.5 L/yr

Explore more salaries
Compare Larsen & Toubro Limited with

Tata Projects

4.2
Compare

Megha Engineering & Infrastructures

3.9
Compare

Shapoorji Pallonji Group

4.1
Compare

Kalpataru Projects International

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview