Add office photos
i
Kirloskar Oil Engines
Compare
Filter interviews by
Kirloskar Oil Engines Design Engineer Interview Questions, Process, and Tips
Top Kirloskar Oil Engines Design Engineer Interview Questions and Answers
- Q1. What is entropy and real life example
- Q2. Used of flywheel, crankcase, AVM pre filter
- Q3. Various thermodynamic processes,
Kirloskar Oil Engines Design Engineer Interview Experiences
2 interviews found
I applied via Campus Placement and was interviewed in Nov 2022. There were 3 interview rounds.
Machine design, CAD, Strength of Machines
(4 Questions)
- Q1. Various thermodynamic processes,
- Ans.
Thermodynamic processes are various ways in which energy can be transferred to or from a system.
Isothermal process: constant temperature
Adiabatic process: no heat transfer
Isobaric process: constant pressure
Isochoric process: constant volume
Examples: carnot cycle, rankine cycle, stirling cycle
- Q2. Factor of safety
- Ans.
Factor of safety is the ratio of the maximum stress a material can withstand to the actual stress it is subjected to.
It is used to ensure the safety and reliability of a design.
It is calculated by dividing the ultimate strength of a material by the maximum stress it is expected to experience.
A higher factor of safety indicates a more reliable design.
Factors of safety vary depending on the application and industry.
For e...
- Q3. What is entropy and real life example
- Ans.
Entropy is a measure of disorder or randomness in a system.
Entropy increases with time in a closed system
A messy room has higher entropy than a clean room
Melting of ice is an example of increase in entropy
Burning of wood is another example of increase in entropy
- Q4. What is Otto cycle
- Ans.
Otto cycle is a four-stroke combustion cycle used in spark-ignition engines.
It consists of four processes: intake, compression, power, and exhaust.
During the intake stroke, the fuel-air mixture is drawn into the cylinder.
In the compression stroke, the mixture is compressed to a high pressure and temperature.
The power stroke is where the spark plug ignites the mixture, causing it to expand and push the piston down.
Final...
Interview Preparation Tips
(3 Questions)
- Q1. Engine basic questions
- Q2. Flywheel used in a engine
- Ans.
A flywheel is a mechanical device used in engines to store rotational energy and smooth out fluctuations in engine speed.
Flywheels are typically made of steel or aluminum and are attached to the engine's crankshaft.
They store energy during the power stroke and release it during the compression stroke to keep the engine running smoothly.
Flywheels are also used in hybrid vehicles to store energy from regenerative braking...
- Q3. Used of flywheel, crankcase, AVM pre filter
- Ans.
Flywheel, crankcase, and AVM pre filter are components used in internal combustion engines.
Flywheel stores rotational energy and helps maintain engine speed during power strokes.
Crankcase houses the crankshaft and other engine components.
AVM pre filter is used to remove larger particles from the air before it enters the engine.
These components are essential for the proper functioning of internal combustion engines.
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Selected
I applied via Walk-in and was interviewed in Oct 2024. There was 1 interview round.
(2 Questions)
- Q1. What is your technical skills and tell about us
- Q2. Are you belong in maharashtra
(4 Questions)
- Q1. What is the casting solidification time?
- Ans.
Casting solidification time is the duration it takes for molten metal to solidify in a casting process.
Casting solidification time depends on factors like material type, mold temperature, and casting geometry.
Higher pouring temperatures generally result in shorter solidification times.
Thicker sections of the casting will take longer to solidify compared to thinner sections.
Aluminum alloys typically have shorter solidif
- Q2. How you decide the parting line?
- Q3. What are the Casting design consideration?
- Ans.
Casting design considerations include material selection, part geometry, draft angles, surface finish, and shrinkage.
Material selection is crucial for the desired properties and performance of the final part.
Part geometry should be designed to minimize stress concentrations and ensure proper flow of molten metal.
Draft angles are necessary for easy removal of the part from the mold.
Surface finish requirements should be ...
- Q4. Current and previous work experience.
CAD test-Housing model
(1 Question)
- Q1. About your self
Interview Preparation Tips
Steam engineering knowledge on steam products
(1 Question)
- Q1. What is steam engineering
- Ans.
Steam engineering involves the design, operation, and maintenance of systems that utilize steam for various industrial applications.
Involves designing steam systems for power generation, heating, and industrial processes
Requires knowledge of thermodynamics, fluid mechanics, and heat transfer
Includes maintenance of boilers, steam turbines, and piping systems
Examples: steam power plants, steam heating systems in building
Design Engineer Interview Questions & Answers
Lakshmi Machine Works
Navanithan P
posted on 16 May 2024
Selected
I applied via Walk-in
(1 Question)
- Q1. Engineering Basics
(1 Question)
- Q1. Technical questions related to the previous experience
Design Engineer Interview Questions & Answers
Isgec Heavy Engineering
Anonymous
posted on 18 Aug 2023
Selected
I applied via Approached by Company and was interviewed in Feb 2024. There were 2 interview rounds.
(1 Question)
- Q1. I was selected for autocad plant 3d designer. Basic pump related questions were asked. Was asked to draw pump suction and discharge piping with its components.
- Ans. Tool test involved basic drafting activity.
Was asked for drafting support
Interview Preparation Tips
- 3D Modeling
- Piping Design
- Piping Layout
Try to learn from your experiences in the previous organization.
Try to learn to how to do the work the fastest way.
Your quick response is what appeals the most.
Best of luck👍
I applied via Naukri.com and was interviewed in Mar 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Thought it was a interview for the post of design engineer but interviewer was interested to pointing out personal details in an unmannered way. In a 12 out of 15 minute of total time span during interview...
- Q2. They ask questions from irrelevant subjects not from required skills one needed for job role
Interview Preparation Tips
(2 Questions)
- Q1. Overall need check What's your career expectations
- Q2. Are you okay for traveling?
Interview Preparation Tips
(3 Questions)
- Q1. Questions on CAD, CATIA
- Q2. Where do you see in next 5 years
- Q3. Challenges in previous company
(2 Questions)
- Q1. Why do want to work with us?
- Q2. Any question to us?
Interview Preparation Tips
Kirloskar Oil Engines Interview FAQs
Tell us how to improve this page.
Kirloskar Oil Engines Interviews By Designations
- Kirloskar Oil Engines Area Sales Manager Interview Questions
- Kirloskar Oil Engines Engineer Interview Questions
- Kirloskar Oil Engines Field Sales Executive Interview Questions
- Kirloskar Oil Engines Deputy Manager Interview Questions
- Kirloskar Oil Engines Design Engineer Interview Questions
- Kirloskar Oil Engines Senior Engineer Interview Questions
- Kirloskar Oil Engines Accounts & Finance Manager Interview Questions
- Kirloskar Oil Engines Area Manager Interview Questions
- Show more
Interview Questions for Popular Designations
- Mechanical Engg. Design Interview Questions
- Senior Design Engineer Interview Questions
- Electrical Design Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Piping Designer Interview Questions
- Auto CAD Designer Interview Questions
- Junior Design Engineer Interview Questions
- Hardware Design Engineer Interview Questions
- Show more
Design Engineer Interview Questions from Similar Companies
Fast track your campus placements
Kirloskar Oil Engines Design Engineer Reviews and Ratings
based on 21 reviews
Rating in categories
|
Deputy Manager
159
salaries
|  ₹5.3 L/yr - ₹12.8 L/yr |
|
Area Sales Officer
115
salaries
| ₹2.5 L/yr - ₹6.1 L/yr |
|
Senior Engineer
114
salaries
| ₹3.6 L/yr - ₹9.5 L/yr |
|
Area Sales Manager
100
salaries
| ₹3.5 L/yr - ₹14 L/yr |
|
Service Engineer
92
salaries
| ₹0.8 L/yr - ₹7.8 L/yr |
Cummins
Greaves Cotton
Mahindra Powerol
Ashok Leyland
- Home >
- Interviews >
- Kirloskar Oil Engines Interview Questions >
- Kirloskar Oil Engines Design Engineer Interview Questions
