Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Kirloskar Oil Engines Team. If you also belong to the team, you can get access from here

Kirloskar Oil Engines Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Kirloskar Oil Engines Design Engineer Interview Questions, Process, and Tips

Updated 11 May 2023

Top Kirloskar Oil Engines Design Engineer Interview Questions and Answers

View all 6 questions

Kirloskar Oil Engines Design Engineer Interview Experiences

2 interviews found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Machine design, CAD, Strength of Machines

Round 3 - Technical 

(4 Questions)

  • Q1. Various thermodynamic processes,
  • Ans. 

    Thermodynamic processes are various ways in which energy can be transferred to or from a system.

    • Isothermal process: constant temperature

    • Adiabatic process: no heat transfer

    • Isobaric process: constant pressure

    • Isochoric process: constant volume

    • Examples: carnot cycle, rankine cycle, stirling cycle

  • Answered by AI
  • Q2. Factor of safety
  • Ans. 

    Factor of safety is the ratio of the maximum stress a material can withstand to the actual stress it is subjected to.

    • It is used to ensure the safety and reliability of a design.

    • It is calculated by dividing the ultimate strength of a material by the maximum stress it is expected to experience.

    • A higher factor of safety indicates a more reliable design.

    • Factors of safety vary depending on the application and industry.

    • For e...

  • Answered by AI
  • Q3. What is entropy and real life example
  • Ans. 

    Entropy is a measure of disorder or randomness in a system.

    • Entropy increases with time in a closed system

    • A messy room has higher entropy than a clean room

    • Melting of ice is an example of increase in entropy

    • Burning of wood is another example of increase in entropy

  • Answered by AI
  • Q4. What is Otto cycle
  • Ans. 

    Otto cycle is a four-stroke combustion cycle used in spark-ignition engines.

    • It consists of four processes: intake, compression, power, and exhaust.

    • During the intake stroke, the fuel-air mixture is drawn into the cylinder.

    • In the compression stroke, the mixture is compressed to a high pressure and temperature.

    • The power stroke is where the spark plug ignites the mixture, causing it to expand and push the piston down.

    • Final...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - You should have strong knowledge of engines and various thermodynamic cycles. Prepare thoroughly about projects you have done throughout the engineering
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. Engine basic questions
  • Q2. Flywheel used in a engine
  • Ans. 

    A flywheel is a mechanical device used in engines to store rotational energy and smooth out fluctuations in engine speed.

    • Flywheels are typically made of steel or aluminum and are attached to the engine's crankshaft.

    • They store energy during the power stroke and release it during the compression stroke to keep the engine running smoothly.

    • Flywheels are also used in hybrid vehicles to store energy from regenerative braking...

  • Answered by AI
  • Q3. Used of flywheel, crankcase, AVM pre filter
  • Ans. 

    Flywheel, crankcase, and AVM pre filter are components used in internal combustion engines.

    • Flywheel stores rotational energy and helps maintain engine speed during power strokes.

    • Crankcase houses the crankshaft and other engine components.

    • AVM pre filter is used to remove larger particles from the air before it enters the engine.

    • These components are essential for the proper functioning of internal combustion engines.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Completed engine basic questions, Creo basic knowledge, casting and sheet metal knowledge

Design Engineer Interview Questions Asked at Other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel ... read more
Q2. what is the difference between lathe and milling machine?
Q3. What is design considerations to mske while designing a Part?
Q4. Which are the operations performed on sheet metal to increase the ... read more
Q5. WHAT IS GD&T IN MECHANICAL? DESCRIBLE ALL IN DETAILS .

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Oct 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is your technical skills and tell about us
  • Q2. Are you belong in maharashtra
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(4 Questions)

  • Q1. What is the casting solidification time?
  • Ans. 

    Casting solidification time is the duration it takes for molten metal to solidify in a casting process.

    • Casting solidification time depends on factors like material type, mold temperature, and casting geometry.

    • Higher pouring temperatures generally result in shorter solidification times.

    • Thicker sections of the casting will take longer to solidify compared to thinner sections.

    • Aluminum alloys typically have shorter solidif

  • Answered by AI
  • Q2. How you decide the parting line?
  • Q3. What are the Casting design consideration?
  • Ans. 

    Casting design considerations include material selection, part geometry, draft angles, surface finish, and shrinkage.

    • Material selection is crucial for the desired properties and performance of the final part.

    • Part geometry should be designed to minimize stress concentrations and ensure proper flow of molten metal.

    • Draft angles are necessary for easy removal of the part from the mold.

    • Surface finish requirements should be ...

  • Answered by AI
  • Q4. Current and previous work experience.
Round 2 - Case Study 

CAD test-Housing model

Round 3 - HR 

(1 Question)

  • Q1. About your self

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for interview like 1st opportunity is the last opportunity and never give up.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(7 Questions)

  • Q1. HOW TO CALCULATE CT CURRENT
  • Ans. 

    CT current can be calculated by dividing the primary current by the turns ratio of the current transformer.

    • CT current = Primary current / Turns ratio

    • Primary current is the current flowing through the primary conductor

    • Turns ratio is the ratio of the number of turns in the primary winding to the number of turns in the secondary winding

  • Answered by AI
  • Q2. WHAT IS LOCKOUT REALY
  • Ans. 

    Lockout is a safety procedure used to ensure that machinery or equipment is properly shut off and cannot be restarted until maintenance or servicing is completed.

    • Lockout involves isolating energy sources to prevent accidental startup.

    • Lockout devices like padlocks and tags are used to physically lock equipment.

    • Lockout procedures must be followed to prevent accidents and injuries.

    • Examples of lockout include locking out e...

  • Answered by AI
  • Q3. WHAT IS IP65 FOR PANEL
  • Ans. 

    IP65 for panel refers to the level of protection against dust and water ingress.

    • IP65 rating means the panel is dust tight and protected against water jets from any direction.

    • The first digit '6' indicates the level of protection against solid objects like dust.

    • The second digit '5' indicates the level of protection against water ingress.

    • Commonly used in outdoor or industrial applications where the panel may be exposed to...

  • Answered by AI
  • Q4. What is TCS AND MASTER TRIP REALY
  • Ans. 

    TCS and Master Trip Relay are protective devices used in electrical systems to prevent damage during faults.

    • TCS stands for Time Current Characteristic Relay, which operates based on the relationship between time and current to trip the circuit breaker during faults.

    • Master Trip Relay is a relay that receives signals from various protective relays and initiates a trip signal to disconnect the circuit in case of a fault.

    • B...

  • Answered by AI
  • Q5. WHAT IS LSC 2A AND LSC 2B
  • Ans. 

    LSC 2A and LSC 2B are standards for lighting in commercial and industrial buildings.

    • LSC 2A and LSC 2B are part of the Lighting Power Density (LPD) requirements in building codes.

    • LSC 2A is for commercial buildings while LSC 2B is for industrial buildings.

    • They specify the maximum allowable power consumption for lighting per unit area in a building.

    • For example, LSC 2A may require a maximum LPD of 0.9 watts per square foot

  • Answered by AI
  • Q6. What REF PROTECTION and HIgh impedance and low impedance
  • Ans. 

    REF protection is used to prevent damage to equipment from electrical faults. High impedance protection is used for sensitive equipment, while low impedance protection is used for power systems.

    • REF protection is used to detect ground faults and prevent damage to equipment.

    • High impedance protection is used for sensitive equipment that requires high accuracy and low fault currents.

    • Low impedance protection is used for pow...

  • Answered by AI
  • Q7. ANSI CODE FOR VERIOUS PROTECTION
  • Ans. 

    ANSI codes are used to identify various types of protection devices in electrical systems.

    • ANSI code 50/51 is for instantaneous overcurrent protection

    • ANSI code 67 is for directional power protection

    • ANSI code 87 is for differential protection

    • ANSI code 59 is for overvoltage protection

  • Answered by AI

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Steam engineering knowledge on steam products

Round 2 - Technical 

(1 Question)

  • Q1. What is steam engineering
  • Ans. 

    Steam engineering involves the design, operation, and maintenance of systems that utilize steam for various industrial applications.

    • Involves designing steam systems for power generation, heating, and industrial processes

    • Requires knowledge of thermodynamics, fluid mechanics, and heat transfer

    • Includes maintenance of boilers, steam turbines, and piping systems

    • Examples: steam power plants, steam heating systems in building

  • Answered by AI
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in

Round 1 - Technical 

(1 Question)

  • Q1. Engineering Basics
Round 2 - Technical 

(1 Question)

  • Q1. Technical questions related to the previous experience
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - One-on-one 

(1 Question)

  • Q1. I was selected for autocad plant 3d designer. Basic pump related questions were asked. Was asked to draw pump suction and discharge piping with its components.
  • Ans. Tool test involved basic drafting activity.
  • Answered Anonymously
Round 2 - Assignment 

Was asked for drafting support

Interview Preparation Tips

Topics to prepare for Isgec Heavy Engineering Design Engineer interview:
  • 3D Modeling
  • Piping Design
  • Piping Layout
Interview preparation tips for other job seekers - Know the job profile inside out.
Try to learn from your experiences in the previous organization.
Try to learn to how to do the work the fastest way.
Your quick response is what appeals the most.
Best of luck👍
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Thought it was a interview for the post of design engineer but interviewer was interested to pointing out personal details in an unmannered way. In a 12 out of 15 minute of total time span during interview...
  • Q2. They ask questions from irrelevant subjects not from required skills one needed for job role

Interview Preparation Tips

Interview preparation tips for other job seekers - Recommending you guys to not opt this company. They act as they have paid money for our studies
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Overall need check What's your career expectations
  • Q2. Are you okay for traveling?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be honest

Kirloskar Oil Engines Interview FAQs

How many rounds are there in Kirloskar Oil Engines Design Engineer interview?
Kirloskar Oil Engines interview process usually has 2-3 rounds. The most common rounds in the Kirloskar Oil Engines interview process are Resume Shortlist, Technical and Aptitude Test.
What are the top questions asked in Kirloskar Oil Engines Design Engineer interview?

Some of the top questions asked at the Kirloskar Oil Engines Design Engineer interview -

  1. What is entropy and real life exam...read more
  2. Used of flywheel, crankcase, AVM pre fil...read more
  3. Various thermodynamic process...read more

Tell us how to improve this page.

Kirloskar Oil Engines Design Engineer Interview Process

based on 2 interviews

Interview experience

2.5
  
Poor
View more
Kirloskar Oil Engines Design Engineer Salary
based on 76 salaries
₹2 L/yr - ₹6.5 L/yr
10% less than the average Design Engineer Salary in India
View more details

Kirloskar Oil Engines Design Engineer Reviews and Ratings

based on 21 reviews

3.4/5

Rating in categories

3.8

Skill development

3.2

Work-life balance

3.1

Salary

3.7

Job security

3.0

Company culture

2.9

Promotions

3.5

Work satisfaction

Explore 21 Reviews and Ratings
Deputy Manager
207 salaries
unlock blur

₹5.8 L/yr - ₹14 L/yr

Senior Engineer
117 salaries
unlock blur

₹3.6 L/yr - ₹9.5 L/yr

Area Sales Officer
106 salaries
unlock blur

₹2.5 L/yr - ₹6 L/yr

Area Sales Manager
100 salaries
unlock blur

₹4.4 L/yr - ₹14.6 L/yr

Service Engineer
91 salaries
unlock blur

₹0.8 L/yr - ₹7 L/yr

Explore more salaries
Compare Kirloskar Oil Engines with

Cummins

4.3
Compare

Greaves Cotton

4.1
Compare

Mahindra Powerol

3.9
Compare

Ashok Leyland

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview