Add office photos
Filter interviews by
Karamtara Engineering Interview Questions, Process, and Tips
Top Karamtara Engineering Interview Questions and Answers
- Q1. What is validity of advance licences?asked in Manager interview
- Q2. Challenges with thr stakeholdersasked in IT Head interview
- Q3. What is definition of least countasked in Senior Engineer interview
Karamtara Engineering Interview Experiences
24 interviews found
Anonymous
(3 Questions)
- Q1. Self introduction
- Q2. Awareness and ratings
- Q3. Personal related question
(2 Questions)
- Q1. Technology transformation and adoption
- Q2. Business Digitization
(1 Question)
- Q1. Smart factory solution
- Ans.
A smart factory solution is a system that utilizes advanced technologies like IoT, AI, and automation to optimize manufacturing processes.
Utilizes IoT devices to collect and analyze data in real-time
Uses AI algorithms to predict maintenance needs and optimize production schedules
Automates tasks such as inventory management and quality control
Improves efficiency, reduces downtime, and increases overall productivity
(2 Questions)
- Q1. Key factor on adoptoin process
- Ans.
The key factor in the adoption process is user engagement and support.
User engagement is crucial for successful adoption.
Providing adequate support and training to users can increase adoption rates.
Clear communication about the benefits of adoption can motivate users to embrace new technology.
Involving key stakeholders in the decision-making process can help smooth the adoption process.
- Q2. Challenges with thr stakeholders
- Ans.
Managing stakeholder expectations and communication is crucial for successful IT projects.
Identifying key stakeholders and their interests
Establishing clear communication channels
Managing conflicts and resolving issues promptly
Aligning IT goals with business objectives
Regularly updating stakeholders on project progress
Interview Preparation Tips
IT Head Interview Questions asked at other Companies
30 MIN TIME, NOT PROPERLY ORGANIZED QUESTION PAPER
NORMAL SUBJECT RELATED TO ENGINEERING
(2 Questions)
- Q1. WHAT IS THE LEAST COUNTS?
- Ans.
The least count is the smallest measurement that can be made by a measuring instrument.
The least count is determined by the smallest division on the scale of the measuring instrument.
It is important in determining the precision and accuracy of measurements.
For example, if a ruler has markings at every millimeter, the least count would be 1 mm.
In a vernier caliper, the least count is typically 0.1 mm or 0.01 mm dependin
- Q2. EXPLAIN YOUR FINAL YEAR PROJECT?
(2 Questions)
- Q1. SELF INTRODUCTION
- Q2. AREA OF INTEREST?
- Ans.
My area of interest is structural engineering, specifically in designing and analyzing buildings and bridges.
Specialize in structural analysis and design
Experience with software like SAP2000 and ETABS
Interest in seismic design and retrofitting
Completed projects include designing a multi-story residential building
Graduate Engineer Interview Questions asked at other Companies
Selected
I applied via Recruitment Consulltant and was interviewed in Jul 2024. There was 1 interview round.
(3 Questions)
- Q1. What basic information would you include when introducing yourself?
- Q2. Expected salary
- Q3. What are the details of the manufacturing process of internal combustion (IC) engines?
Interview Preparation Tips
Production Graduate Engineer Trainee Interview Questions asked at other Companies
(4 Questions)
- Q1. Invoice process, GST filling,vendor payment process.
- Q2. TDS working, Bank Reconciliation, vendor reconciliation.
- Q3. Receipt entries & Payment entries.
- Q4. Make TDS report month wise.
- Ans.
To make TDS report month wise, organize data by month and calculate total TDS for each month.
Organize TDS data by month
Calculate total TDS for each month
Generate report showing TDS for each month
Interview Preparation Tips
Executive Accountant Interview Questions asked at other Companies
Karamtara Engineering interview questions for popular designations
Anmol Dongre
Selected
I applied via Approached by Company and was interviewed in Mar 2024. There was 1 interview round.
(1 Question)
- Q1. Advance authorisation process and Import regulations
Interview Preparation Tips
Get interview-ready with Top Karamtara Engineering Interview Questions
mahesh Shantilal Tikadiya
(2 Questions)
- Q1. Past experience
- Q2. Knowledge of work for concern department
Commercial Manager Interview Questions asked at other Companies
Jobs at Karamtara Engineering
(3 Questions)
- Q1. Difference between cycle time and takt time?
- Ans.
Cycle time is the total time it takes to complete a task, while takt time is the rate at which a product must be produced to meet customer demand.
Cycle time is the total time taken to complete a process or task.
Takt time is the rate at which a product must be produced to meet customer demand.
Cycle time includes both value-added and non-value-added time.
Takt time is calculated as available production time divided by cus...
- Q2. What are attributes of OEE?
- Ans.
OEE stands for Overall Equipment Effectiveness and includes availability, performance, and quality factors.
OEE is a key performance indicator used to measure the efficiency of a manufacturing process.
It takes into account three factors: availability (the percentage of time the equipment is available for production), performance (the speed at which the equipment runs compared to its maximum speed), and quality (the perc...
- Q3. Availability, Performance & Quality.
Interview Preparation Tips
Production Graduate Engineer Trainee Interview Questions asked at other Companies
Vikas Bharti
Selected
I applied via Walk-in and was interviewed in Nov 2022. There were 2 interview rounds.
(5 Questions)
- Q1. Least count of vernier caliper
- Ans.
The least count of vernier caliper is the smallest measurement that can be read on the scale.
The least count is determined by the number of divisions on the vernier scale and the main scale.
For example, if the main scale has 10 divisions and the vernier scale has 9 divisions, the least count would be 1/10 x 1/9 = 0.111 mm.
The least count can vary depending on the precision of the instrument.
It is important to use the c...
- Q2. Measuring devices
- Q3. Measuring table like mm to cm metre etc
- Q4. Types of vernier caliper
- Ans.
Vernier calipers are of two types - internal and external.
Internal vernier caliper is used to measure the internal diameter of an object.
External vernier caliper is used to measure the external diameter of an object.
Both types have a main scale and a sliding vernier scale for precise measurements.
- Q5. Engine and types
Fabrication Engineer Interview Questions asked at other Companies
Details about work responsibilities and Work experience improvement
(2 Questions)
- Q1. Planning strategies, work responsibilities, SAP related questions
- Q2. What was your achievements in your career
- Ans.
I have achieved significant milestones in my career as a Project Engineer.
Successfully completed a complex construction project within the given timeline and budget.
Implemented innovative strategies to improve project efficiency and reduce costs.
Received recognition for outstanding problem-solving skills and ability to handle challenging situations.
Led a team of engineers and technicians to successfully deliver multipl...
Interview Preparation Tips
Project Engineer Interview Questions asked at other Companies
Selected
I applied via Referral and was interviewed before Jun 2023. There was 1 interview round.
(2 Questions)
- Q1. When gst get implemented
- Ans.
GST was implemented in India on July 1, 2017.
GST was implemented in India on July 1, 2017, replacing multiple indirect taxes.
It aimed to simplify the tax structure and create a unified market across the country.
GST has different slabs for different goods and services, ranging from 0% to 28%.
It has helped in reducing tax evasion and increasing tax compliance.
- Q2. Personal related question and about my self
Interview Preparation Tips
GST Officer Interview Questions asked at other Companies
Top trending discussions
Karamtara Engineering Interview FAQs
The duration of Karamtara Engineering interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Karamtara Engineering Interviews By Designations
- Karamtara Engineering Production Graduate Engineer Trainee Interview Questions
- Karamtara Engineering Accountant Interview Questions
- Karamtara Engineering Assistant General Manager Quality Assurance Interview Questions
- Karamtara Engineering Commercial Manager Interview Questions
- Karamtara Engineering Executive Accountant Interview Questions
- Karamtara Engineering Executive Packaging Interview Questions
- Karamtara Engineering Fabrication Engineer Interview Questions
- Karamtara Engineering Graduate Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Executive Interview Questions
- Design Engineer Interview Questions
- Business Analyst Interview Questions
- Senior Associate Interview Questions
- Associate Software Engineer Interview Questions
- Accountant Interview Questions
- Test Engineer Interview Questions
- Senior Software Engineer Interview Questions
- Show more
Karamtara Engineering Interview Process
based on 25 interviews
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
Karamtara Engineering Reviews and Ratings
based on 231 reviews
Rating in categories
|
Quality Engineer
64
salaries
|  ₹1.7 L/yr - ₹4.1 L/yr |
|
Production Engineer
48
salaries
| ₹1.2 L/yr - ₹4.5 L/yr |
|
Assistant Manager
34
salaries
| ₹4.2 L/yr - ₹9 L/yr |
|
Graduate Engineer Trainee (Get)
18
salaries
| ₹1.5 L/yr - ₹4 L/yr |
|
Safety Officer
17
salaries
| ₹2.5 L/yr - ₹4 L/yr |
Larsen & Toubro Limited
TCS
BHEL
Thermax Limited
- Home >
- Interviews >
- Karamtara Engineering Interview Questions
