Filter interviews by
Technical and aptitude test,formal question for aptitude and normal technical question
As an Assistant Engineer, my role is to support the engineering team in various tasks and projects.
Assist in the design and development of engineering projects
Conduct research and gather data for analysis
Prepare technical reports and documentation
Collaborate with team members to solve engineering problems
Perform quality control checks on engineering processes
Assist in the maintenance and troubleshooting of equipment
Ens...
I applied via campus placement at West Bengal University of Technology (WBUT) and was interviewed in Aug 2021. There were 4 interview rounds.
Speed is the rate of change of distance while velocity is the rate of change of displacement.
Speed is a scalar quantity while velocity is a vector quantity.
Speed can be calculated by dividing distance by time while velocity can be calculated by dividing displacement by time.
Speed has no direction while velocity has direction.
For example, a car moving at a constant speed of 60 km/h has a speed of 60 km/h but its velocit...
Moment of inertia is the measure of an object's resistance to rotational motion.
Moment of inertia depends on the mass and distribution of mass of an object.
It is denoted by the symbol 'I'.
It is used to calculate the torque required to rotate an object.
Examples include a spinning top and a rotating wheel.
Moment of inertia is important in engineering and physics applications.
Petrol in a diesel engine can cause serious damage to the engine.
Petrol does not ignite in the same way as diesel, causing incomplete combustion and damage to the engine.
The engine may start to make unusual noises and vibrations.
The fuel injectors and fuel pump may also be damaged.
It is important to drain the fuel tank and flush the fuel system as soon as possible.
Prevention is key - always double-check the fuel type b
Top trending discussions
I applied via Company Website
I applied via Naukri.com and was interviewed in Oct 2023. There were 3 interview rounds.
Emergency handling Boiler and auxiliary
Just for harresment of employees
Silica in main steam line of boiler can cause severe damage and reduce efficiency.
Silica can lead to the formation of hard deposits on boiler tubes, reducing heat transfer efficiency.
High levels of silica can also cause erosion and corrosion of boiler components.
Regular monitoring and control of silica levels in boiler feedwater is essential to prevent damage.
Treatment methods such as ion exchange or reverse osmosis ca
Coal Gross Calorific Value (GCV) is a key parameter in determining the efficiency of a power plant.
GCV is a measure of the amount of heat released when a unit mass of coal is combusted.
It is typically expressed in units of kilojoules per kilogram (kJ/kg) or British thermal units per pound (Btu/lb).
Higher GCV coal is preferred in power plants as it produces more energy per unit mass.
The GCV of coal can vary depending on
posted on 24 Mar 2024
I applied via Naukri.com and was interviewed before Mar 2023. There was 1 interview round.
I applied via Walk-in and was interviewed in Mar 2022. There were 2 interview rounds.
Refer and check after decided
posted on 17 Jan 2022
The rpm of bucket wheel depends on its size and application.
The rpm can range from 1 to 10 depending on the size of the bucket wheel.
For example, a small bucket wheel used in mining may have an rpm of 1-2, while a larger one used in power generation may have an rpm of 8-10.
The rpm also depends on the speed of the conveyor belt and the amount of material being moved.
The rpm can be calculated using the formula: rpm = (ci...
I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.
I am looking for new challenges and opportunities for growth in a different environment.
Seeking new challenges and opportunities for growth
Interested in exploring different work environments
Want to broaden my skill set and knowledge
Looking for better career advancement prospects
Motor and gearbox alignment is crucial for efficient operation and longevity of equipment.
Ensure both motor and gearbox are securely mounted to their respective bases.
Use precision alignment tools such as dial indicators to measure and adjust alignment.
Check for parallelism and angular alignment between motor and gearbox shafts.
Make necessary adjustments to shims or mounting bolts to achieve proper alignment.
Perform a ...
A basic hydraulic circuit consists of a pump, control valves, actuators, and a reservoir.
Start with a hydraulic pump to generate flow of hydraulic fluid.
Include control valves to regulate the flow of fluid to actuators.
Actuators are used to convert hydraulic energy into mechanical energy.
A reservoir is needed to store hydraulic fluid and maintain pressure.
Ensure proper connections and fittings to prevent leaks.
I applied via Referral and was interviewed in Jul 2023. There were 4 interview rounds.
It was an online test with 4 sections. Numerical, Reasoning, Verbal ability and your Subject ( GIS in my case)
based on 1 interview
Interview experience
based on 102 reviews
Rating in categories
Engineer
425
salaries
| ₹2.6 L/yr - ₹7.5 L/yr |
Senior Engineer
396
salaries
| ₹3 L/yr - ₹9.5 L/yr |
Assistant Manager
303
salaries
| ₹4.4 L/yr - ₹12 L/yr |
Assistant Engineer
288
salaries
| ₹2.2 L/yr - ₹7 L/yr |
Mechanical Engineer
129
salaries
| ₹2.5 L/yr - ₹7.6 L/yr |
Tata Steel
Steel Authority Of India
ArcelorMittal Nippon Steel
Jindal Steel and Power