Filter interviews by
The density of carbon steel is approximately 7.85 grams per cubic centimeter.
The density of carbon steel is commonly measured in grams per cubic centimeter (g/cm³).
The density of carbon steel can vary slightly depending on the specific composition and heat treatment.
For example, the density of low carbon steel is typically around 7.85 g/cm³.
Higher carbon steels may have slightly higher densities.
Density is an important...
The density of carbon steel is 7850 kg/m3.
Carbon steel is a commonly used material in construction and manufacturing.
The density of carbon steel can vary depending on the specific alloy and composition.
The high density of carbon steel makes it a durable and strong material for various applications.
The type of pipe in steel can vary depending on its purpose and specifications.
Common types of steel pipes include carbon steel pipes, stainless steel pipes, and alloy steel pipes.
Carbon steel pipes are widely used in various industries due to their strength and affordability.
Stainless steel pipes are corrosion-resistant and commonly used in applications where hygiene and durability are important, such as in the food a...
Type in section pipe refers to the classification or categorization of pipes based on their shape, size, and material.
Types of pipes can include circular, rectangular, square, or oval shapes.
Pipes can be classified based on their diameter, wall thickness, and length.
Materials used for pipes can vary, such as steel, PVC, copper, or cast iron.
Different types of pipes are used for various applications like plumbing, drain
Tell me about your self & your Experienced you faced
Steel is a metal alloy made primarily of iron and carbon.
Steel is known for its strength, durability, and versatility.
It is used in construction, manufacturing, transportation, and many other industries.
Different types of steel can be created by varying the amount of carbon and other elements added to the alloy.
Stainless steel, for example, contains chromium and nickel to resist corrosion.
High-strength low-alloy steel ...
I go home every day after work.
I have a regular work schedule and leave the office at the same time every day.
I prioritize work-life balance and make sure to spend time with my family.
Occasionally, I may have to work late or travel for business, but I always communicate with my family about my schedule.
I am a highly motivated and skilled engineer with experience in various industries.
I have a Bachelor's degree in Mechanical Engineering from XYZ University.
I have worked as a design engineer at ABC Company for 3 years, where I designed and developed new products.
I am proficient in CAD software such as SolidWorks and AutoCAD.
I have experience in project management and have successfully led a team of engineers to complet...
My family consists of my parents, my younger sister, and my grandparents.
Parents
Younger sister
Grandparents
Top trending discussions
I applied via Job Portal and was interviewed in Mar 2024. There was 1 interview round.
Grade of M20 refers to the mix ratio of concrete where M denotes mix and 20 represents the compressive strength in N/mm^2 after 28 days.
M20 concrete mix consists of 1 part cement, 1.5 parts sand, and 3 parts aggregate.
The compressive strength of M20 concrete after 28 days is 20 N/mm^2.
It is commonly used for residential construction like foundations, slabs, and beams.
Grade of M25 refers to the mix design of concrete with a compressive strength of 25 MPa.
M25 grade concrete is a mix design with a compressive strength of 25 MPa after 28 days of curing.
It is commonly used in construction for residential buildings, bridges, and pavements.
The mix proportion for M25 grade concrete is usually 1:1:2 (cement:sand:aggregate).
4.75 to 10 size of sieve refers to the range of particle sizes that can pass through the sieve.
4.75 to 10 size of sieve indicates the range of particle sizes that can pass through the sieve mesh.
Particles smaller than 4.75 will pass through, while particles larger than 10 will be retained on the sieve.
This range is commonly used in particle size analysis in industries like construction and mining.
Sinking fund method is a way for a company to set aside money over time to repay a debt or replace an asset.
Sinking fund method involves regular contributions to a fund specifically designated for repaying debt or replacing assets.
The purpose of the sinking fund is to ensure that enough money is available when the debt matures or the asset needs to be replaced.
By using the sinking fund method, a company can avoid havin...
An annuity is a financial product that provides a series of payments at regular intervals.
Annuities are typically used for retirement income or to provide a steady income stream.
There are different types of annuities such as fixed annuities, variable annuities, and indexed annuities.
Annuities can be purchased with a lump sum payment or through a series of payments over time.
The payments from an annuity can be guarantee...
After the shortlisting of CVs, list was sent for those who were eligible for the OT. The online test included aptitude + technical. There were pretty easy to moderate questions but time was less.
I applied via Referral and was interviewed before Sep 2023. There were 3 interview rounds.
Product design and engineering
Stress strain curve shows the relationship between stress and strain in a material under tension.
It is a graphical representation of how a material deforms under stress.
The curve typically consists of three regions: elastic deformation, plastic deformation, and fracture.
The slope of the curve in the elastic region is the material's Young's Modulus.
The ultimate tensile strength is the maximum stress a material can withs...
Welding type selection is based on material compatibility and joint requirements. Strength calculations involve determining load, material properties, and safety factors.
Consider material compatibility when selecting welding type (e.g. MIG, TIG, stick)
Determine joint requirements such as strength, aesthetics, and cost
Strength calculations involve determining loads, material properties, and safety factors
Use appropriate...
I am passionate about solving complex engineering problems and contributing to innovative projects.
Excited about the opportunity to work on cutting-edge technology
Passionate about problem-solving and innovation
Interested in collaborating with a talented team of engineers
Seeking a challenging and rewarding career in engineering
I am detail-oriented, organized, and focused on problem-solving.
I prioritize tasks based on deadlines and importance.
I pay close attention to details to ensure accuracy in my work.
I am proactive in identifying and solving problems before they escalate.
I communicate effectively with team members to collaborate and achieve goals.
I am adaptable and open to feedback for continuous improvement.
Dealing with people in difficult situations requires empathy, active listening, and problem-solving skills.
Show empathy and understanding towards their feelings and emotions
Practice active listening to fully understand their perspective
Offer support and reassurance to help them feel more comfortable
Collaborate on finding solutions together to address the difficult situation
Maintain a calm and composed demeanor to help
I applied via Referral and was interviewed in Nov 2022. There were 3 interview rounds.
I am a highly motivated engineer with experience in designing and implementing complex systems.
I have a Bachelor's degree in Electrical Engineering from XYZ University.
I have worked as a software engineer at ABC Company for 3 years.
I am proficient in programming languages such as Java, Python, and C++.
I have experience in designing and implementing large-scale systems, including a cloud-based data management system for...
I applied via Naukri.com and was interviewed before May 2023. There were 2 interview rounds.
The V-Separator outlet temp refers to the temperature of the outlet stream from the V-Separator unit.
The V-Separator outlet temp is a crucial parameter in process engineering to ensure efficient separation of materials.
It is typically measured using temperature sensors located at the outlet of the V-Separator unit.
The outlet temperature can vary depending on the type of material being separated and the operating condit...
based on 3 interviews
Interview experience
based on 95 reviews
Rating in categories
Assistant Manager
58
salaries
| ₹5 L/yr - ₹12.2 L/yr |
Senior Engineer
58
salaries
| ₹4.7 L/yr - ₹8.7 L/yr |
Engineer
54
salaries
| ₹3.8 L/yr - ₹7 L/yr |
Assistant Engineer
39
salaries
| ₹2.8 L/yr - ₹5.5 L/yr |
Manager
21
salaries
| ₹9.3 L/yr - ₹16.2 L/yr |
Tata Steel
Steel Authority Of India
ArcelorMittal Nippon Steel
Jindal Steel and Power