Jsl Lifestyle Senior Engineer Interview Questions and Answers

Q1. Basic questions and past jobs question
Add your answer
Q2. Skilss question
Add your answer

Q1. About my self..
Add your answer
Q2. Technical questions regarding desgin
Add your answer

Q1. About design question
Add your answer

Vc interview with MD sir

Q1. Percentage of chromium in steel?
Ans. 
Chromium content in steel typically ranges from 10-30% depending on the grade and type of steel.
• Chromium is added to steel to improve its corrosion resistance, hardness, and strength.

• Stainless steel typically contains around 10-30% chromium.

• High-chromium steels, such as tool steels, can contain up to 30% chromium.

• Chromium content can vary based on the specific grade and application of the steel.
Answered by AI
Add your answer
Q2. Advantages and Disadvantage of Sulphur in steel?
Ans. 
Sulphur in steel can improve machinability but may reduce ductility and impact strength.
• Advantages: Improved machinability, easier to cut and shape

• Disadvantages: Reduced ductility, impact strength, and toughness

• Sulphur content should be controlled to avoid negative effects on mechanical properties

• Examples: Lead-free cutting steels often contain higher sulphur levels for better machinability
Answered by AI
Add your answer

Q1. Grades of steel and Their Chemical Composition
Ans. 
Different grades of steel have varying chemical compositions to meet specific requirements.
• Grades of steel include carbon steel, alloy steel, and stainless steel.

• Carbon steel typically contains 0.05-2.0% carbon.

• Alloy steel contains additional elements like nickel, chromium, and molybdenum.

• Stainless steel has high chromium content for corrosion resistance.

• Each grade has unique properties based on its chemical compositio
Answered by AI
Add your answer
Q2. Sectional weight of steel for different sizes
Ans. 
Sectional weight of steel varies based on the size of the steel section.
• The sectional weight of steel is calculated by multiplying the volume of the steel section by the density of steel.

• Different sizes of steel sections have different sectional weights.

• For example, a 100mm x 100mm x 10mm steel section will have a different sectional weight compared to a 150mm x 150mm x 12mm steel section.
Answered by AI
Add your answer
Q3. What are the grains and grain structures inside the steel at different temperatures?
Ans. 
Grains in steel change in size and shape at different temperatures, affecting its properties.
• At high temperatures, grains in steel are larger and more irregularly shaped.

• As steel cools, grains become smaller and more uniform, leading to increased strength and hardness.

• Grain boundaries can affect properties like toughness and corrosion resistance.

• Examples: Austenite has smaller grains at lower temperatures, resulting in...read more
Answered by AI
Add your answer

Q1. What are the methods to operate and measure effectively?
Ans. 
Methods to operate and measure effectively include setting clear goals, using appropriate tools, monitoring progress, and adjusting strategies as needed.
• Set clear and specific goals to provide direction and focus.

• Use appropriate tools and technology to accurately measure progress and outcomes.

• Regularly monitor and track performance to identify areas for improvement.

• Adjust strategies and tactics based on feedback and da...read more
Answered by AI
Add your answer
Q2. What is the process for creating a report?
Ans. 
The process for creating a report involves gathering data, analyzing information, organizing content, and presenting findings.
• Gather relevant data and information for the report.

• Analyze the data to draw conclusions and insights.

• Organize the content in a logical structure, including an introduction, body, and conclusion.

• Present the findings clearly and concisely, using visuals if necessary.

• Review and revise the report f...read more
Answered by AI
Add your answer

Coding questions based on core Java and DSA

Leetocde easy question

Q1. About your previous company.
Add your answer
Q2. Technical and theoretical question from your previous company and job related equipments wise.
Add your answer
Q3. Work related technical & theoretical questions.
Add your answer
Q4. About yourself Introduction and your previous company experience
Add your answer

Q1. Reading die and punch
Add your answer
Q2. Regarding CAD software knowledge
Add your answer
Q3. AutoCAD and solidwork
Add your answer

Q1. Ask any questions about structural steel and its grade
Add your answer
Q2. Ask about welding and its types
Add your answer