Upload Button Icon Add office photos

ITD Cementation India

Compare button icon Compare button icon Compare

Filter interviews by

ITD Cementation India Civil Site Engineer Interview Questions and Answers

Updated 22 Feb 2024

ITD Cementation India Civil Site Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Feb 2023. There were 3 interview rounds.

Round 1 - Group Discussion 

It was very good , they give certain time to prepare yourself

Round 2 - Aptitude Test 

It's basically arithmetic and reasoning test

Round 3 - Technical 

(2 Questions)

  • Q1. What is the nominal size of brick
  • Ans. 

    The nominal size of a brick is the size specified by the manufacturer for identification and classification purposes.

    • The nominal size of a brick is typically larger than its actual size to account for mortar joints.

    • Common nominal sizes for bricks include 4 inches by 8 inches by 2 1/4 inches and 3 5/8 inches by 2 1/4 inches by 8 inches.

    • It is important to consider the nominal size when planning and designing brickwork pr

  • Answered by AI
  • Q2. What are the admixture of concrete
  • Ans. 

    Admixtures are added to concrete to alter its properties or enhance its performance.

    • Admixtures can improve workability, durability, strength, and set time of concrete

    • Types of admixtures include water reducers, accelerators, retarders, air-entraining agents, and superplasticizers

    • Example: Adding a water reducer admixture can increase the workability of concrete without compromising strength

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Get your knowledge about construction

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Mar 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What is the most challenging situation you have been through in your career?

Interview Preparation Tips

Interview preparation tips for other job seekers - To ace an interview you need to be a good listener as much as a good speaker. Try to listen and understand what the interviewer is asking and then reply. Never be in a hurry to answer, take time. If you did not understand what interviewer is asking simply ask him to repeat, pls don't presume anything and answer anything that comes to your mind. Most importantly never fake in an interview just try to be your best...

I applied via Naukri.com and was interviewed before Aug 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. How to start a new project ?

Interview Preparation Tips

Interview preparation tips for other job seekers - Just say what are you doing in the past and what you can do.

Interview Questionnaire 

3 Questions

  • Q1. How many time u take any update shuttering system?
  • Ans. 

    The question is unclear and lacks context.

    • Please provide more information about the 'update shuttering system'.

    • Specify the time frame for the updates.

    • Clarify the purpose or objective of the updates.

    • Provide any relevant examples or scenarios.

  • Answered by AI
  • Q2. Why u want to work as a execution engineer? Why not any special team such as formwork team,or quality team?
  • Ans. 

    I want to work as an execution engineer because I enjoy the challenge of overseeing and coordinating all aspects of a project.

    • As an execution engineer, I would have the opportunity to work on a variety of projects and oversee all aspects of their execution.

    • I enjoy the challenge of coordinating different teams and ensuring that everything runs smoothly.

    • While working on a formwork or quality team would be valuable experi...

  • Answered by AI
  • Q3. As contractor farm Engineer in RCC which is most important? 1) Reinforcements 2)Formwork 3)Concrete And why?
  • Ans. 

    Concrete is the most important as it provides the strength and durability to the structure.

    • Concrete is the backbone of any RCC structure.

    • It provides the strength and durability to the structure.

    • Reinforcements and formwork are important too, but without concrete, they are useless.

    • Proper mix design and curing of concrete are crucial for the longevity of the structure.

  • Answered by AI

I applied via Company Website and was interviewed before Apr 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Load distribution under rigid and flexible footings,water tank design, steel foundation design
  • Q2. Mix design of concrete, btech project
  • Ans. 

    Mix design of concrete and BTech project

    • Mix design involves determining the proportions of cement, water, aggregates, and admixtures to achieve desired properties of concrete

    • Factors like strength, workability, durability, and cost are considered while designing the mix

    • BTech project can involve studying the effect of different mix designs on properties of concrete or developing a new mix design

    • Examples of BTech projects...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - be well prepared with basics and if you are already experienced, be prepared with site knowledge

I applied via Company Website and was interviewed in Mar 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. All question based on past work experiences.

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare all the past experience challenge and step by step your envolvement.

Interview Questionnaire 

1 Question

  • Q1. Technical question
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Pile related and stressing related and what type of work is working on
  • Q2. Density of bentonite Prestressing formula
  • Ans. 

    Density of bentonite and prestressing formula are two separate topics in civil engineering.

    • Density of bentonite is typically around 2.0-2.5 g/cm^3.

    • Prestressing formula involves calculating the stress in a structure due to applied loads and prestressing forces.

    • Example of prestressing formula: Stress = Load / Area + Prestressing Force / Area

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep interview frelly and discussion
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. CoS billing procedure
  • Ans. 

    CoS billing procedure involves categorizing and prioritizing traffic for billing purposes.

    • CoS (Class of Service) is a method used in networking to prioritize different types of traffic.

    • Billing procedures based on CoS involve assigning costs or charges to different classes of service.

    • Examples include charging more for high-priority traffic like VoIP calls compared to lower-priority data traffic.

  • Answered by AI
  • Q2. Client billing
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Railway formation ,Field drain and structural
  • Q2. Privious company job detail

Interview Preparation Tips

Interview preparation tips for other job seekers - Please, advice u to find me good job in multipurpose company and other international construction company,
The company has got good project as railway,highway,flyover ,bridges and station building in india.

ITD Cementation India Interview FAQs

How many rounds are there in ITD Cementation India Civil Site Engineer interview?
ITD Cementation India interview process usually has 3 rounds. The most common rounds in the ITD Cementation India interview process are Group Discussion, Aptitude Test and Technical.
What are the top questions asked in ITD Cementation India Civil Site Engineer interview?

Some of the top questions asked at the ITD Cementation India Civil Site Engineer interview -

  1. What is the nominal size of br...read more
  2. What are the admixture of concr...read more

Tell us how to improve this page.

ITD Cementation India Civil Site Engineer Interview Process

based on 5 interviews

Interview experience

4.8
  
Excellent
View more
ITD Cementation India Civil Site Engineer Salary
based on 54 salaries
₹2.2 L/yr - ₹6.5 L/yr
8% more than the average Civil Site Engineer Salary in India
View more details

ITD Cementation India Civil Site Engineer Reviews and Ratings

based on 21 reviews

3.5/5

Rating in categories

3.6

Skill development

3.2

Work-life balance

3.1

Salary

3.4

Job security

3.4

Company culture

2.7

Promotions

3.3

Work satisfaction

Explore 21 Reviews and Ratings
Assistant Manager
292 salaries
unlock blur

₹5.4 L/yr - ₹15 L/yr

Senior Engineer
230 salaries
unlock blur

₹3.8 L/yr - ₹11 L/yr

Civil Engineer
178 salaries
unlock blur

₹2.8 L/yr - ₹9.5 L/yr

Engineer
176 salaries
unlock blur

₹2.9 L/yr - ₹8 L/yr

Deputy Manager
160 salaries
unlock blur

₹7 L/yr - ₹17.5 L/yr

Explore more salaries
Compare ITD Cementation India with

L&T Construction

4.0
Compare

Simplex Infrastructures

3.4
Compare

AtkinsRealis

3.9
Compare

Ashoka Buildcon

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview