Upload Button Icon Add office photos

Filter interviews by

GVPR Engineers Pipeline Supervisor Interview Questions, Process, and Tips

Updated 27 Dec 2023

GVPR Engineers Pipeline Supervisor Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. How is hydro testing done?
  • Ans. 

    Hydro testing is a process of testing the integrity of pipelines by filling them with water and pressurizing them to ensure they can withstand the required pressure.

    • Pipelines are filled with water and pressurized to a specified pressure level.

    • Pressure is held for a specified duration to check for leaks or weaknesses.

    • Any leaks or weaknesses found are repaired before the pipeline is put into service.

  • Answered by AI
  • Q2. What is the water pressure
  • Ans. 

    Water pressure in a pipeline can vary depending on factors such as pipe diameter, flow rate, and elevation changes.

    • Water pressure is typically measured in pounds per square inch (PSI).

    • Factors affecting water pressure include pipe diameter, flow rate, elevation changes, and friction losses.

    • For example, a pipeline with a larger diameter will have lower water pressure compared to a pipeline with a smaller diameter at the ...

  • Answered by AI
  • Q3. Special joint of ms pipe
  • Ans. 

    Special joints in MS pipes are used for specific purposes like connecting pipes of different materials or sizes.

    • Special joints include flanged joints, expansion joints, and mechanical couplings.

    • Flanged joints are used for connecting pipes to valves or other equipment.

    • Expansion joints allow for movement in the piping system due to temperature changes.

    • Mechanical couplings are used to connect pipes of different materials ...

  • Answered by AI
  • Q4. Which welding rod is used?
  • Ans. 

    The welding rod used depends on the type of metal being welded and the welding process being used.

    • Different welding rods are used for different types of metals such as steel, aluminum, and stainless steel.

    • The welding rod must be compatible with the welding process being used, such as stick welding, MIG welding, or TIG welding.

    • Common welding rods include E6010, E7018, ER4043, and ER308L.

  • Answered by AI
Round 3 - Technical 

(3 Questions)

  • Q1. DI Pepe water testing pressure
  • Ans. 

    DI Pepe water testing pressure is a crucial aspect of ensuring pipeline safety and efficiency.

    • DI Pepe water testing pressure refers to the process of measuring the pressure of water in the pipeline to ensure it is within safe operating limits.

    • This testing is essential for detecting any leaks, blockages, or other issues that could compromise the integrity of the pipeline.

    • Regular water testing pressure helps in maintaini...

  • Answered by AI
  • Q2. DI Pepe length and Daya
  • Ans. 

    DI Pepe length and Daya is a measurement used in pipeline construction to determine the distance between two points.

    • DI Pepe length is the distance between two pipeline joints, typically measured in meters or feet.

    • Daya is the depth at which the pipeline is buried underground, usually measured in meters.

    • Understanding DI Pepe length and Daya is crucial for ensuring proper installation and maintenance of pipelines.

  • Answered by AI
  • Q3. DI Pipe push up joint
  • Ans. 

    A DI pipe push up joint is a type of joint used in ductile iron pipelines to connect two pipes together.

    • DI pipe push up joints are designed to allow for easy installation and maintenance of pipelines.

    • They typically consist of a rubber gasket that fits between the two pipe ends, creating a watertight seal.

    • The joint is then secured with bolts or clamps to ensure a secure connection.

    • DI pipe push up joints are commonly use...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Pipe line supervisor

Skills evaluated in this interview

Interview questions from similar companies

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. What is pipe laying
  • Ans. 

    Pipe laying is the process of installing pipes underground or underwater for various purposes such as transportation of fluids or gases.

    • Pipe laying involves digging trenches or using specialized equipment to lay pipes in the ground.

    • Pipes can also be laid underwater using techniques such as horizontal directional drilling or pipe jacking.

    • The pipes are then connected together and tested for leaks before being put into se...

  • Answered by AI
  • Q2. What is process before laying
  • Ans. 

    The process before laying a pipeline involves planning, surveying, obtaining permits, clearing the right of way, and preparing the trench.

    • Planning the route of the pipeline to ensure efficiency and safety

    • Surveying the land to identify any obstacles or potential issues

    • Obtaining necessary permits and approvals from relevant authorities

    • Clearing the right of way by removing any vegetation or structures in the path

    • Preparing...

  • Answered by AI
  • Q3. What is the gap between to pipeline
  • Ans. 

    The gap between two pipelines refers to the distance or separation between them.

    • The gap between two pipelines is typically determined by safety regulations and engineering standards.

    • The gap is important to prevent interference between pipelines and ensure proper maintenance access.

    • For example, in offshore pipelines, the gap between them is usually around 20-30 meters to allow for safe operations.

  • Answered by AI
  • Q4. What is the process of back feeling
  • Ans. 

    Back filling is the process of refilling an excavated area with soil or other materials to restore the ground to its original level.

    • Back filling is done after the installation of pipelines to cover and protect them.

    • The process involves carefully placing and compacting the backfill material to prevent settling or damage to the pipeline.

    • Common backfill materials include sand, gravel, and crushed stone.

    • Back filling is an ...

  • Answered by AI
  • Q5. What is house keeping
  • Ans. 

    Housekeeping refers to the management and organization of tasks related to maintaining cleanliness and order in a living or working space.

    • Housekeeping involves tasks such as cleaning, organizing, and tidying up living or working spaces.

    • It includes activities like dusting, vacuuming, mopping, and laundry.

    • Housekeeping also involves decluttering, arranging furniture, and maintaining overall cleanliness.

    • Good housekeeping p...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - We should redy for our work every time with full confidence

I applied via Company Website and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Group Discussion 

Pipe line work,valves fixing, chamber work, bridge construction,

Round 2 - HR 

(4 Questions)

  • Q1. What are your strengths and weaknesses?
  • Q2. What are your salary expectations?
  • Q3. Share details of your previous job.
  • Q4. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Please give one opportunity for your company. I have best experience in pipe line work & valves fixing, chamber work, FHTC work.

GVPR Engineers Interview FAQs

How many rounds are there in GVPR Engineers Pipeline Supervisor interview?
GVPR Engineers interview process usually has 3 rounds. The most common rounds in the GVPR Engineers interview process are Technical and Resume Shortlist.
What are the top questions asked in GVPR Engineers Pipeline Supervisor interview?

Some of the top questions asked at the GVPR Engineers Pipeline Supervisor interview -

  1. How is hydro testing do...read more
  2. Which welding rod is us...read more
  3. what is the water press...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 GVPR Engineers interview
WalkIn
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.
GVPR Engineers Pipeline Supervisor Salary
based on 4 salaries
₹3 L/yr - ₹3.7 L/yr
5% less than the average Pipeline Supervisor Salary in India
View more details

GVPR Engineers Pipeline Supervisor Reviews and Ratings

based on 2 reviews

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-Life balance

5.0

Salary & Benefits

5.0

Job Security

4.0

Company culture

5.0

Promotions/Appraisal

5.0

Work Satisfaction

Explore 2 Reviews and Ratings
Senior Engineer
209 salaries
unlock blur

₹3.6 L/yr - ₹8.9 L/yr

Civil Engineer
162 salaries
unlock blur

₹1.8 L/yr - ₹7.2 L/yr

Engineer
144 salaries
unlock blur

₹2.5 L/yr - ₹7.2 L/yr

Assistant Manager
141 salaries
unlock blur

₹4.6 L/yr - ₹12.6 L/yr

Mechanical Engineer
66 salaries
unlock blur

₹2.8 L/yr - ₹6 L/yr

Explore more salaries
Compare GVPR Engineers with

L&T Construction

4.0
Compare

Tata Projects

4.3
Compare

Shapoorji Pallonji Group

4.2
Compare

Hindustan Construction Company

4.2
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview