i
Goodyear
Filter interviews by
I applied via Walk-in
Elasticity is the ability of a material to return to its original shape after being stretched or compressed. It is important in rubber for its ability to absorb shock and provide flexibility.
Rubber is a highly elastic material due to its long polymer chains that can stretch and return to their original shape.
Elasticity in rubber is important for its use in tires, where it allows the tire to absorb shock and maintain co...
Thre is third party role as MHR contract
Top trending discussions
posted on 2 Feb 2024
I applied via Naukri.com
posted on 30 Jun 2024
Defects in plastic parts can be caused by various factors such as design flaws, material impurities, and manufacturing errors.
Common defects include warping, sink marks, flash, and short shots.
Design flaws can lead to weak spots or improper fitment.
Material impurities can cause discoloration, bubbles, or poor surface finish.
Manufacturing errors like improper cooling or injection pressure can result in defects.
Quality c...
Undercut is a hairstyle where the hair on the top of the head is longer than the sides and back.
Undercut involves shaving or cutting the sides and back of the head short while leaving the top longer
Popular among both men and women
Can be styled in various ways such as slicked back, pompadour, or messy
Celebrities like Brad Pitt and Miley Cyrus have been seen sporting undercuts
posted on 8 Feb 2024
I applied via Company Website and was interviewed in Aug 2023. There were 3 interview rounds.
50 Technical questions..
Group Discussion among 6 people..
posted on 27 May 2024
I applied via Approached by Company and was interviewed before May 2023. There were 2 interview rounds.
posted on 13 Jul 2022
I applied via Referral and was interviewed in Jun 2022. There were 2 interview rounds.
The assessment test is not so difficult, with the basic knowledge we can crack it, and we need to get 55% to get qualified for the interview round
The flow rate can be determined by multiplying the cross-sectional area of the pipe by the velocity of the fluid.
Flow rate = Cross-sectional area × Velocity
Cross-sectional area can be calculated using the formula: Area = π × (diameter/2)^2
Velocity can be measured using a flow meter or calculated using other parameters
Example: If the pipe diameter is 0.5 meters and the fluid velocity is 2 meters per second, the flow rat
posted on 2 Apr 2024
I applied via Job Fair and was interviewed before Apr 2023. There were 2 interview rounds.
posted on 10 Jun 2023
I applied via Campus Placement and was interviewed before Jun 2022. There were 2 interview rounds.
Injection moulding is a manufacturing process where molten material is injected into a mould cavity to create a solid object.
Molten material is injected into a mould cavity under high pressure
The material cools and solidifies to form the desired shape
Commonly used for producing plastic parts in mass production
Used in various industries such as automotive, medical, and consumer goods
Injection moulding is a manufacturing process used to produce parts by injecting material into a mould.
Injection moulding involves melting a material and injecting it into a mould cavity
The material solidifies inside the mould and is then ejected as a finished part
Common materials used in injection moulding include plastics, metals, and glass
posted on 29 Nov 2021
I applied via campus placement at Kongu Engineering College, Erode and was interviewed in Oct 2021. There were 3 interview rounds.
Draw shear stress and bending moment diagram of cantilever beam
Shear stress diagram shows the distribution of shear stress along the length of the beam
Bending moment diagram shows the distribution of bending moment along the length of the beam
Shear stress is maximum at the fixed end and zero at the free end
Bending moment is maximum at the fixed end and zero at the free end
The diagrams can be drawn using equations and b
posted on 10 Aug 2021
I applied via Walk-in and was interviewed in Jul 2021. There were 3 interview rounds.
based on 1 interview
Interview experience
based on 4 reviews
Rating in categories
Area Sales Manager
119
salaries
| ₹9 L/yr - ₹19 L/yr |
Assistant Manager
85
salaries
| ₹6.5 L/yr - ₹16 L/yr |
Area Sales Executive
55
salaries
| ₹10.4 L/yr - ₹15.4 L/yr |
Territory Sales Manager
39
salaries
| ₹7.2 L/yr - ₹12 L/yr |
Territory Sales Incharge
37
salaries
| ₹7.5 L/yr - ₹12 L/yr |
Bridgestone
Michelin
Continental
Pirelli