Upload Button Icon Add office photos

Filter interviews by

Daimler Truck Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 28 Sep 2022

Daimler Truck Graduate Engineer Trainee (Get) Interview Experiences

3 interviews found

Round 1 - Aptitude Test 

It was pretty easy. Was based on overall skills of an employee

Round 2 - Technical 

(2 Questions)

  • Q1. Difference between bolt stress and strain
  • Ans. 

    Bolt stress is the force applied to a bolt, while bolt strain is the deformation caused by that force.

    • Bolt stress is measured in force per unit area, while bolt strain is measured in units of length.

    • Stress is the force applied to an object, while strain is the resulting deformation.

    • Bolt stress can cause bolt failure if it exceeds the bolt's yield strength, while bolt strain can cause permanent deformation.

    • Examples of b...

  • Answered by AI
  • Q2. Meshing reasons and reasons for analysis
  • Ans. 

    Meshing is done to divide the geometry into smaller elements for analysis. Analysis is done to understand the behavior of the system under different conditions.

    • Meshing helps in creating a finite element model of the geometry

    • It helps in accurately capturing the geometry and its features

    • Analysis helps in understanding the stress, strain, and deformation of the system

    • It helps in predicting the behavior of the system under...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It was a good experience. The interviewers were understanding and asked questions based on our interests

I applied via campus placement at Vellore Institute of Technology (VIT) and was interviewed in Aug 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

One hour test on basic aptitute and technical knowledge

Round 3 - Technical 

(1 Question)

  • Q1. Technical interview round based on technical knowledge projects done, and resume
Round 4 - One-on-one 

(1 Question)

  • Q1. Managerial question to assess company compatibility

Interview Preparation Tips

Interview preparation tips for other job seekers - Be yourself and be open. When asked about opinions on things, speak what you feel right to you

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?
Round 1 - Aptitude Test 

40 MCQs are there of CS fundamentals

Round 2 - Technical 

(1 Question)

  • Q1. 3 Data Structure and algo Questions
Round 3 - Technical 

(1 Question)

  • Q1. Based on Resume all the question from resume

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and answers Fully ,
Work on DSA that will help alot

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Aptitude Test 

The test conducted by SHL included sections on technical skills, psychometrics, and data interpretation (interactive G3+).

Round 2 - Group Discussion 

Most of the topics provided were related to electric vehicles and luxury cars.

Round 3 - One-on-one 

(1 Question)

  • Q1. What manufacturing process do you prefer discussing, and can you elaborate on its key aspects for two minutes?
  • Ans. 

    I prefer discussing the injection molding process.

    • Injection molding is a manufacturing process used to produce parts by injecting material into a mold.

    • Key aspects include material selection, mold design, injection pressure, cooling time, and part ejection.

    • Examples of products made using injection molding include plastic bottles, automotive parts, and medical devices.

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
Less than 2 weeks
Result
-

I applied via campus placement at National Institute of Technology (NIT), Tiruchirappalli and was interviewed in Nov 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Basic question on aptitude

Round 2 - Group Discussion 

Topic on emotional intelligence in workplace

Round 3 - Technical 

(1 Question)

  • Q1. Based on basic concepts of material science

Interview Preparation Tips

Interview preparation tips for other job seekers - i went till the last round but unfortounately i cant able to make it , i would say brush up with the basic concept and prepare your resume
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at PSG Institute of Management, Coimbatore and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Questions from thermodynamics, engines, compressors
Round 2 - One-on-one 

(2 Questions)

  • Q1. Write CNC coding for a component
  • Ans. 

    CNC coding is used to program machines to create precise components.

    • Use G-code and M-code to control the machine movements and functions

    • Specify tool paths, speeds, feeds, and other parameters

    • Example: G01 X10 Y5 Z2 F100

  • Answered by AI
  • Q2. Valve port diagram for 4 stroke engine
  • Ans. 

    Valve port diagram for a 4-stroke engine shows the intake and exhaust valves in relation to the piston movement.

    • Intake valve opens to allow air/fuel mixture into the cylinder during the intake stroke

    • Exhaust valve opens to release exhaust gases during the exhaust stroke

    • Valve overlap occurs when both intake and exhaust valves are partially open at the same time

    • Diagram typically shows the position of valves in relation to...

  • Answered by AI

I applied via Campus Placement and was interviewed in Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Domain based questions were asked.

Round 3 - Technical 

(2 Questions)

  • Q1. Most questions were related to domain, I'm from electrical bg so all electrical, electronics and project related questions.
  • Q2. Project related questions were asked mainly, from starting to end process.

Interview Preparation Tips

Interview preparation tips for other job seekers - They ask really difficult questions and try to manipulate freshers.

Interview Questionnaire 

3 Questions

  • Q1. How are you different from others ?
  • Q2. SI and CI engine
  • Ans. 

    SI and CI engines are two types of internal combustion engines used in vehicles and machinery.

    • SI (Spark Ignition) engines use a spark plug to ignite the fuel-air mixture, while CI (Compression Ignition) engines use compression to ignite the fuel.

    • SI engines are commonly used in gasoline-powered vehicles, while CI engines are used in diesel-powered vehicles and heavy machinery.

    • SI engines have a higher power output at hig...

  • Answered by AI
  • Q3. Fe-C diagram
  • Ans. 

    Fe-C diagram is a graphical representation of the phases of iron-carbon alloys at different temperatures and carbon concentrations.

    • Fe-C diagram is used to predict the microstructure and properties of steel.

    • It shows the different phases of iron-carbon alloys such as ferrite, austenite, and cementite.

    • The diagram helps in determining the heat treatment process for steel.

    • The eutectoid point on the diagram represents the co...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and write those things on resume that you have genuinely done because they will ask questions from your Resume

I applied via Campus Placement and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Self introduction, Why you choose this service field.

Interview Preparation Tips

Interview preparation tips for other job seekers - It's wonderful and good experience.Interviewers often ask this question as a way to determine whether or not you took time to research the company and to learn why you see yourself as a good fit. The best way to prepare for this question is to do your homework and learn about the products, services, mission, history and culture of this workplace. In your answer, mention the aspects of the company that appeal to you and align with your career goals. Explain why you’re looking for these things in an employer.

Interview Questionnaire 

3 Questions

  • Q1. Will you do MBA?
  • Q2. What is the difference between Sales & Marketing?
  • Ans. 

    Sales is the process of selling products or services, while marketing is the process of creating demand for those products or services.

    • Sales involves direct interaction with customers to sell products or services, while marketing involves creating brand awareness and promoting products or services through various channels.

    • Sales is focused on short-term goals, such as meeting sales targets, while marketing is focused on...

  • Answered by AI
  • Q3. Basics of SOM

Daimler Truck Interview FAQs

How many rounds are there in Daimler Truck Graduate Engineer Trainee (Get) interview?
Daimler Truck interview process usually has 3 rounds. The most common rounds in the Daimler Truck interview process are Technical, Aptitude Test and One-on-one Round.
What are the top questions asked in Daimler Truck Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the Daimler Truck Graduate Engineer Trainee (Get) interview -

  1. Difference between bolt stress and str...read more
  2. Meshing reasons and reasons for analy...read more
  3. Technical interview round based on technical knowledge projects done, and res...read more

Tell us how to improve this page.

Daimler Truck Graduate Engineer Trainee (Get) Salary
based on 45 salaries
₹8 L/yr - ₹14 L/yr
175% more than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Daimler Truck Graduate Engineer Trainee (Get) Reviews and Ratings

based on 4 reviews

3.4/5

Rating in categories

3.1

Skill development

3.7

Work-life balance

3.3

Salary

3.0

Job security

3.0

Company culture

2.8

Promotions

3.4

Work satisfaction

Explore 4 Reviews and Ratings
Senior Technical Lead
122 salaries
unlock blur

₹15 L/yr - ₹39 L/yr

Senior Engineer
115 salaries
unlock blur

₹10.5 L/yr - ₹25.2 L/yr

Senior Consultant
95 salaries
unlock blur

₹14 L/yr - ₹25.6 L/yr

Principal Consultant
87 salaries
unlock blur

₹15 L/yr - ₹38.7 L/yr

Senior Product Design Engineer
61 salaries
unlock blur

₹12.4 L/yr - ₹19.8 L/yr

Explore more salaries
Compare Daimler Truck with

Tata Motors

4.2
Compare

Ashok Leyland

4.1
Compare

Mahindra & Mahindra

4.1
Compare

Volvo

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview