Upload Button Icon Add office photos

Filter interviews by

CHANDERPUR WORKS Assistant Engineer Interview Questions and Answers

Updated 29 Dec 2024

CHANDERPUR WORKS Assistant Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at Seth Jai Prakash Mukund Lal Institute of Engineering and Technology, Yamunanagar and was interviewed before Dec 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Reasoning, maths & english + 1-2 question on engineering

Round 2 - Technical 

(2 Questions)

  • Q1. Introduce yourself
  • Ans. 

    I am a recent graduate with a degree in Mechanical Engineering and a passion for problem-solving and innovation.

    • Recent graduate with a degree in Mechanical Engineering

    • Passionate about problem-solving and innovation

    • Strong technical skills in CAD software and mechanical design

    • Experience with project management and teamwork

    • Excellent communication and interpersonal skills

  • Answered by AI
  • Q2. And rest based on your resume and work experience.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Assignment 

Software or tool test

Round 2 - Technical 

(2 Questions)

  • Q1. Related to technical question about fabrication.
  • Q2. Tool related question
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Asked about target starting date, current and expected salary
Round 3 - One-on-one 

(1 Question)

  • Q1. Asked on familiarity with codes, structural design and digital skills

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be natural in answering interview questions and don't think too much
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Feb 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Steel and shuttering releted questions
Round 3 - HR 

(1 Question)

  • Q1. Expectation releted questions

Interview Preparation Tips

Interview preparation tips for other job seekers - This company is very good but management is very bed management was not know how to deal with client and how to deal out staff

I applied via LinkedIn and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Group Discussion 

CFBC Boiler related questions

Interview Preparation Tips

Topics to prepare for KEPCO Plant Service & Engineering Assistant Engineer interview:
  • Boiler Operations
Interview preparation tips for other job seekers - CFBC Boiler good knowledge and experience, Emergency handling boiler

I applied via Recruitment Consulltant and was interviewed before May 2021. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. What is blinding? Different types of blinds used in o&g?
  • Ans. 

    Blinding is the process of isolating a section of a pipeline or equipment to prevent flow or contamination.

    • Temporary or permanent blinds can be used depending on the situation

    • Common types of blinds include spectacle blinds, paddle blinds, and bleed rings

    • Blinding is often used during maintenance or repair work to ensure safety

    • Blinding can also be used to prevent contamination during storage or transportation

    • Blinding can...

  • Answered by AI
  • Q2. Procedures before starting a work in a refinery equipment,
  • Ans. 

    Before starting work in a refinery equipment, certain procedures must be followed.

    • Obtain a work permit

    • Perform a safety check of the equipment

    • Ensure proper personal protective equipment is worn

    • Verify that all valves are in the correct position

    • Confirm that the equipment is properly grounded

    • Check for any leaks or abnormal conditions

    • Communicate with other workers in the area

    • Follow all established procedures and protocols

  • Answered by AI
  • Q3. What will you do if there's an H2S leak and there's no wind movement,
  • Ans. 

    I will follow the emergency response plan and evacuate the area immediately.

    • Activate the alarm system to alert others in the area

    • Put on personal protective equipment (PPE) including a respirator

    • Evacuate the area immediately and move to a safe location

    • Notify emergency services and follow the emergency response plan

    • Monitor the situation and wait for the all-clear signal before returning to the area

  • Answered by AI
  • Q4. From where you'll advice your workers to start unbloting a heat exchanger head?
  • Ans. 

    I would advise my workers to start unbolting the heat exchanger head from the top and work their way down.

    • Start from the top and work your way down

    • Use appropriate tools and safety equipment

    • Follow proper procedures and guidelines

    • Ensure all bolts are properly labeled and accounted for

    • Inspect the gasket and replace if necessary

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident, answer what you know.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Indeed and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. BMD of Retaining wall, Box Culvert, Bridges.
  • Q2. Identification of truss member in tension or in compression
  • Ans. 

    Truss members in tension have forces pulling them apart, while members in compression have forces pushing them together.

    • Tension members have forces acting away from the joint they are connected to.

    • Compression members have forces acting towards the joint they are connected to.

    • Identify tension or compression based on the direction of the force on the member.

    • Consider the overall equilibrium of forces in the truss to deter...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Study only your CV, word to word you have written in your CV should be justified by job. Seeker.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. What is the HR life cycle
  • Ans. 

    HR life cycle refers to the stages of an employee's journey within an organization, from recruitment to exit.

    • The HR life cycle includes stages such as recruitment, onboarding, performance management, career development, and exit

    • Recruitment involves sourcing, screening, and selecting candidates for open positions

    • Onboarding includes orientation, training, and integration into the company culture

    • Performance management inv...

  • Answered by AI
  • Q2. Recruiting procedures

Interview Preparation Tips

Interview preparation tips for other job seekers - Be calm and answer honestly and don’t panic be prepared

I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What is the height of top guard rails,mid rails and toe board rails?
  • Ans. 

    The height of top guard rails, mid rails, and toe board rails varies depending on the specific application and regulations.

    • The height of top guard rails is typically between 42 and 45 inches above the walking surface.

    • Mid rails are typically located halfway between the top rail and the walking surface.

    • Toe board rails are typically between 4 and 6 inches high and are installed at the base of the guardrail system.

    • Specific...

  • Answered by AI
  • Q2. What is safe working load and formula?
  • Ans. 

    Safe working load is the maximum weight a structure or equipment can safely support without risk of failure.

    • SWL is determined by factors such as material strength, design, and intended use.

    • Formula for SWL varies depending on the type of equipment or structure.

    • For example, the SWL formula for a crane may take into account the boom length, angle, and weight distribution.

    • It is important to always follow the manufacturer's...

  • Answered by AI
  • Q3. Job role and duties of HSE engineer

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was good and very soon joining offer was given.

Interview Questionnaire 

1 Question

  • Q1. What is the role of mechanical engineers in building a sky-scrapper? What are the different challenges faced?
  • Ans. 

    Mechanical engineers play a crucial role in building a sky-scraper by designing and implementing the mechanical systems.

    • Designing and implementing HVAC systems to regulate temperature and air quality

    • Designing and implementing plumbing systems for water supply and drainage

    • Designing and implementing elevator and escalator systems for vertical transportation

    • Designing and implementing fire protection systems to ensure safe...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: I specified about my extra-curricular activities in an organized manner. I had loads of techno-managerial activities. Whatever extra-curricular activities that I was involved in, I had been pursuing them since my first year, hence I found it necessary to group them in an appropriate manner in the resume. Also I had participated in an event called Robocon, I had done a project and had 2 different internships, I highlighted all these specifically in my resume.
Tips: I referred a site of Princeton University to prepare the resume. It’s a very good website and hugely referred by students for preparing their resume. I also got some valuable insights from my seniors in accordance to building my resume. I intended to join a technical company hence I had framed a technical resume.

Round: HR Interview
Experience: This was a direct personal interview round. They started asking H.R. questions initially and then floated over to the technical questions. In total 8 students were short-listed for this round, 2 from mechanical, 2 from electrical and 2 from civil and each and every student was practically asked the same set of the HR questions.

My interview was taken by 2 people, one Indian and the other was a foreigner. Right at the start of the interview they explained me how the interview would proceed. They even told me that the interview would be conducted only for 20 minutes. They started asking questions like ‘Tell me about yourself.’ and the likes. While I was answering the foreign interviewer seemed to be noting down some points. He also asked me whether I had any knowledge whatsoever regarding the company. I gave him an apt reply based on the knowledge of the company that I possessed.

Further he went into the technical questions. He asked me to state the role of a mechanical engineer in a company like Arup which mainly dealt with engineering design and construction. I said that mechanical engineers look after the refrigeration and the piping system. They also asked me to name the building that fascinated me the most and that was built by Arup. I said I liked the building built by Arup in Hong-Kong which consisted of the overhanging beam. I was not aware of the name of the building. They enlightened me further about that building for themselves.

They asked me about which monument did I like the most. I gave a very honest reply to this. I told them that earlier when I was in an internship at Mumbai I had seen the sky-scrappers for the first time. I told them as to how intriguing I found those huge structures and how different I found the world from the top of these sky-scrappers. They were pretty impressed with my honest reply. They moved on to asking me questions on the sky-scrappers. I started talking on vibrations, but they corrected me stating that this is looked after by the civil engineers. They started dropping some hints. I thought for a moment and finally figured out that the mechanical engineers carried out the works related to energy and sustainable development, refrigeration and ventilation and also the piping systems. I also gave some suitable examples for each of them.

He asked whether I had any experiences of working in a team. I gave them a brief account of the Robocon event that we participated in and how under my leadership we gave the best performance compared to the past three years that IIT- Roorkee participated in the event. The Indian interviewer further inquired about my family background. I told them about my father’s business and convinced them that I would never do business and that I would remain loyal to the company.

College Name: IIT ROORKEE
Motivation: I heard about the company for the first time during the recruitment process. I did not even attend the pre-placement talk held by the company; consequently I was not much aware either about the company or the profile on offer.

CHANDERPUR WORKS Interview FAQs

How many rounds are there in CHANDERPUR WORKS Assistant Engineer interview?
CHANDERPUR WORKS interview process usually has 2 rounds. The most common rounds in the CHANDERPUR WORKS interview process are Technical and Aptitude Test.

Tell us how to improve this page.

People are getting interviews through

based on 1 CHANDERPUR WORKS interview
Campus Placement
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.
CHANDERPUR WORKS Assistant Engineer Salary
based on 16 salaries
₹1.8 L/yr - ₹3.6 L/yr
18% less than the average Assistant Engineer Salary in India
View more details

CHANDERPUR WORKS Assistant Engineer Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

3.0

Skill development

5.0

Work-Life balance

5.0

Salary & Benefits

3.0

Job Security

4.0

Company culture

5.0

Promotions/Appraisal

4.0

Work Satisfaction

Explore 1 Review and Rating
Assistant Engineer
16 salaries
unlock blur

₹1.8 L/yr - ₹3.6 L/yr

Engineer
13 salaries
unlock blur

₹2.6 L/yr - ₹5.9 L/yr

Senior Engineer
11 salaries
unlock blur

₹3 L/yr - ₹6 L/yr

Design Engineer
10 salaries
unlock blur

₹2.1 L/yr - ₹4 L/yr

Quality Engineer
8 salaries
unlock blur

₹2 L/yr - ₹3.6 L/yr

Explore more salaries
Compare CHANDERPUR WORKS with

BHEL

4.2
Compare

Larsen & Toubro Limited

4.0
Compare

Thermax Limited

4.2
Compare

Siemens

4.1
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview