Filter interviews by
I applied via Referral and was interviewed in Jun 2021. There were 3 interview rounds.
Before, during, and after welding, various aspects are inspected to ensure quality and safety.
Before welding, the materials and equipment are inspected for cleanliness, proper setup, and suitability for the welding process.
During welding, the inspector checks for proper welding technique, adherence to welding procedures, and the quality of welds being produced.
After welding, the inspector inspects the completed welds f...
Fabrication spools must be inspected thoroughly before releasing to the erection site.
Check for any defects or damages on the spool.
Ensure that the spool meets the required specifications and standards.
Verify that all necessary documentation and certifications are in place.
Perform visual and dimensional inspections on the spool.
Conduct hydrostatic testing to check for leaks or other issues.
Ensure that the spool is prop...
I will check both Ground Inspection and IMIR for quality control purposes.
I will check the ground inspection report for any discrepancies or issues with the physical product.
I will also review the IMIR (In-Process Material Inspection Report) to ensure that all necessary inspections and tests have been completed.
I will verify that all required documentation is present and accurate.
I will communicate any issues or concer...
In RT film check, I will inspect for any defects or anomalies in the radiographic image. Sensitivity calculation is the measure of the smallest detectable flaw.
Inspect for any defects or anomalies in the radiographic image
Check for proper exposure and contrast
Ensure that the film is free from any artifacts or processing errors
Calculate the sensitivity of the film to detect the smallest flaw
Use a penetrameter to determi...
Hydro test procedures involve filling a vessel or pipeline with water and pressurizing it to check for leaks or structural integrity.
The vessel or pipeline is filled with water
The water is pressurized to a predetermined level
The pressure is held for a specified amount of time
The vessel or pipeline is inspected for leaks or structural damage
If no issues are found, the water is drained and the vessel or pipeline is deeme...
During spool erection time, I will check for proper alignment, fit-up, welding quality, and dimensional accuracy.
Check for proper alignment of spool components
Ensure fit-up is correct and there are no gaps or misalignments
Inspect welding quality for defects such as cracks, porosity, and incomplete fusion
Verify dimensional accuracy of the spool according to the design specifications
Check for any damage or corrosion on t
I applied via Naukri.com and was interviewed in Jun 2024. There were 3 interview rounds.
NDT methods include ultrasonic testing, radiographic testing, magnetic particle testing, liquid penetrant testing, and visual testing.
Ultrasonic testing uses high-frequency sound waves to detect flaws or measure material thickness.
Radiographic testing involves the use of X-rays or gamma rays to inspect the internal structure of a component.
Magnetic particle testing is used to detect surface and near-surface flaws in fe...
Soil testing procedures involve collecting samples, analyzing them for nutrients and pH levels, and interpreting the results.
Collect soil samples from different areas of the field
Air dry the samples before sending them to a lab for analysis
Test for nutrients like nitrogen, phosphorus, and potassium
Measure pH levels to determine soil acidity or alkalinity
Interpret the results to make recommendations for fertilizers or s
My current Cost to Company (CTC) is $80,000 per annum, including a 10% variable component.
My current CTC is $80,000 per annum
Includes a 10% variable component
Variable component is based on performance and sales targets
I was interviewed in Jan 2025.
I have 5 years of experience working with coal in various inspection roles.
Performed visual inspections on coal samples to check for quality and impurities
Conducted tests to determine the moisture content and calorific value of coal
Interpreted data from inspections to ensure compliance with industry standards
Collaborated with mining companies to improve coal quality and safety measures
I am joining this company because of its reputation for excellence in the field of inspection and quality control.
I am impressed by the company's track record of ensuring high standards in inspections.
I believe that my skills and experience align well with the company's values and goals.
I am excited about the opportunity to contribute to the company's success and growth.
I have heard positive feedback from current emplo...
I applied via Recruitment Consulltant and was interviewed in Nov 2024. There were 2 interview rounds.
Why should we hire you?
Bureau Veritas interview questions for popular designations
I am currently working as a Credit Controller at XYZ Company.
Responsible for monitoring and managing the company's credit policies
Contacting customers regarding overdue payments
Negotiating payment plans with customers
Preparing reports on credit status
Working closely with sales and finance teams
Get interview-ready with Top Bureau Veritas Interview Questions
I applied via Naukri.com and was interviewed in May 2024. There was 1 interview round.
I applied via AmbitionBox and was interviewed in Apr 2024. There was 1 interview round.
Prioritize tasks, delegate when possible, communicate with team, take breaks to avoid burnout.
Prioritize tasks based on deadlines and importance.
Delegate tasks to team members if possible.
Communicate with team and supervisor about workload.
Take short breaks to avoid burnout and maintain productivity.
Maintaining work-life balance involves setting boundaries, prioritizing self-care, and practicing time management.
Set boundaries by establishing designated work hours and sticking to them
Prioritize self-care by making time for activities that bring you joy and relaxation
Practice time management by creating to-do lists and scheduling breaks throughout the day
I applied via Naukri.com and was interviewed in Oct 2024. There was 1 interview round.
Dsa hard was asked. prepare from any sheet.
To conduct a compaction test, follow these steps:
1. Select a representative sample of soil from the site.
2. Determine the moisture content of the soil sample.
3. Place the soil sample in a compaction mold in layers and compact each layer using a standard compaction method (e.g. Proctor test).
4. Measure the density of the compacted soil sample using a nuclear density gauge or sand cone method.
5. Calculate the compaction ...
My strengths include strong communication skills, adaptability, and a positive attitude.
Strong communication skills - able to effectively convey information and ideas
Adaptability - able to quickly adjust to new situations and challenges
Positive attitude - able to maintain optimism and motivation in difficult circumstances
Top trending discussions
The duration of Bureau Veritas interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 113 interviews
Interview experience
based on 1.8k reviews
Rating in categories
Surveyor
215
salaries
| ₹0 L/yr - ₹0 L/yr |
Project Coordinator
180
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Inspector
162
salaries
| ₹0 L/yr - ₹0 L/yr |
Chemist
151
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Surveyor
127
salaries
| ₹0 L/yr - ₹0 L/yr |
SGS
Intertek
TÜV NORD
DNV