Premium Employer

i

This company page is being actively managed by Brakes India Team. If you also belong to the team, you can get access from here

Brakes India Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Brakes India Design Engineer Interview Questions, Process, and Tips

Updated 25 Oct 2024

Top Brakes India Design Engineer Interview Questions and Answers

View all 6 questions

Brakes India Design Engineer Interview Experiences

3 interviews found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Oct 2023. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Explain Free body Diagram ?
  • Ans. 

    Free body diagram is a visual representation of all the forces acting on an object in a given situation.

    • It shows all the forces acting on an object as vectors, with arrows indicating the direction and magnitude of each force.

    • The object of interest is represented as a point or a simple shape, with all external forces acting on it shown around it.

    • Internal forces within the object are not shown on a free body diagram.

    • Free...

  • Answered by AI
  • Q2. What is the working principle of a brake system ?
  • Ans. 

    A brake system works by converting kinetic energy into heat energy through friction to slow down or stop a vehicle.

    • Brake pedal is pressed by the driver

    • Brake fluid is compressed in the master cylinder

    • Pressure is transmitted through brake lines to the brake calipers or wheel cylinders

    • Brake pads or shoes press against the brake rotor or drum to create friction and slow down the vehicle

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. What is Stack up tolerance ?
  • Ans. 

    Stack up tolerance refers to the accumulation of tolerances in a series of components or parts that are assembled together.

    • Stack up tolerance is important in ensuring that all components fit together properly in an assembly.

    • It involves considering the individual tolerances of each component and how they may add up or cancel out when assembled.

    • For example, if a shaft has a tolerance of +/- 0.1mm and a hole has a toleran...

  • Answered by AI
  • Q2. What is the difference between cylindricity and roundness in GD&T ?
  • Ans. 

    Cylindricity refers to the overall 3D form of a cylinder, while roundness refers to the deviation of a circle from a perfect circle.

    • Cylindricity is a 3D tolerance that controls the overall form of a cylinder, ensuring that all points on the surface lie within a specified tolerance zone.

    • Roundness is a 2D tolerance that controls the deviation of a circle from a perfect circle, ensuring that the entire circle lies within ...

  • Answered by AI
Round 3 - Tool Test 

(2 Questions)

  • Q1. Create 3d model for the given engineering drawing ?
  • Ans. 

    To create a 3D model from an engineering drawing, use CAD software to accurately replicate the dimensions and features.

    • Use CAD software such as AutoCAD, SolidWorks, or Fusion 360 to create the 3D model.

    • Refer to the engineering drawing for dimensions, angles, and features to accurately replicate in the 3D model.

    • Utilize tools within the CAD software to create extrusions, cuts, fillets, and other features as needed.

    • Check ...

  • Answered by AI
  • Q2. Do drafting for the given 3d model ?
  • Ans. 

    Yes, I can create detailed 2D drawings based on the 3D model provided.

    • Create orthographic views (top, front, side) of the 3D model

    • Include dimensions, annotations, and tolerances in the drawings

    • Generate section views to show internal features

    • Add surface finish symbols and notes as needed

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Brakes India Design Engineer interview:
  • Strength of materials
Interview preparation tips for other job seekers - Do as much preparation for your technical interviews.

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. As usual tell us about you.
  • Ans. My answer is very straight. I told about my educational background, then my former work nature.
  • Answered Anonymously
  • Q2. Most questions were about the previous experience
  • Ans. Mostly about the Engg. Drawings, basic GD&T.
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Brakes India Design Engineer interview:
  • Engineering Drawing
  • GD&T
  • Stackup
  • Strength of materials
Interview preparation tips for other job seekers - Be prepared with what you put in your resume.

All the best.

Design Engineer Interview Questions Asked at Other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel ... read more
Q2. what is the difference between lathe and milling machine?
Q3. What is design considerations to mske while designing a Part?
Q4. Which are the operations performed on sheet metal to increase the ... read more
Q5. WHAT IS GD&T IN MECHANICAL? DESCRIBLE ALL IN DETAILS .
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. In this round , the interviewer are asked questions from what we are learning in college.
Round 3 - One-on-one 

(1 Question)

  • Q1. About ourselves and communication skills

Interview Preparation Tips

Interview preparation tips for other job seekers - I wish to all ,Be hopeful and trying to get a better job .

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. Where do you see yourself in 5 years?
  • Ans. 

    In 5 years, I see myself as a senior design engineer leading a team of designers and working on innovative projects.

    • Leading a team of designers

    • Working on innovative projects

    • Continuing to learn and develop my skills

    • Contributing to the growth and success of the company

    • Building strong relationships with clients and colleagues

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: The initial short-listing was based on an online technical test lasting 1.5 hours.
Tips: Study in detail about Pumps, Compressors, Distillation.
Duration: 150 minutes

Round: Group Discussion
Experience: There was also a Group Discussion Round in which a one page problem statement was given to solve.It had 10 members. It was not an eliminative round.
Tips: Group discussion with friends on recent happenings helps in preparing for the GD.
Duration: 10 minutes

Round: Technical Interview
Experience: There were two interviews of 30 minutes each.
General Engineering. Not a very technical interview.
Tips: Prepare for technical interview and quant.

Round: HR Interview
Experience: HR round had normal set of HR questions.
Tips: Watch YouTube videos on HR interviews.

General Tips: Focus on topics like HT, FM, MT, CRE, Process Control .
College Name: IIT Madras

I applied via Naukri.com and was interviewed before Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Technical questions related to your field,Software knowledge on which your working
  • Q2. Brief introduction about the company that your attending interview

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident,

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Depends on experience
  • Q2. Related to systematic approach
  • Ans. Problem solving tools, OEE, FPY, Root cause analysis. 14Q, 5S
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Never join Bosch chakan if want to have growing future In career and work life balance.

I applied via Naukri.com and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Core Java, J2EE

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

I appeared for an interview in Jul 2020.

Interview Questionnaire 

1 Question

  • Q1. Waht is your achievements
  • Ans. 

    I have achieved several milestones throughout my career as a Senior Engineer.

    • Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.

    • Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.

    • Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - All most 3 Rounds they conducted, they taken 3 days for every round and they taken allmost 3 months to select... For learners this company was good...

I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What are the die casting and machining defects?
  • Ans. 

    Die casting and machining defects are common in manufacturing processes.

    • Die casting defects include porosity, shrinkage, cold shuts, and flash.

    • Machining defects include burrs, chatter marks, and tool marks.

    • Die casting defects can be caused by improper temperature, pressure, or metal flow.

    • Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.

    • Defects can lead to part failure, reduced

  • Answered by AI
  • Q2. What is the formula of filling and high speed ratio?
  • Ans. 

    Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.

    • Filling and high speed ratio formula is V/Q

    • V is the volume of the container and Q is the flow rate of the liquid

    • The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate

    • The higher the flow rate, the faster the c

  • Answered by AI
  • Q3. Why do u want to join Motherson?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be always job needy in front of interviewer.
Interview experience
2
Poor
Difficulty level
Easy
Process Duration
4-6 weeks
Result
No response

I applied via Naukri.com and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Plastics and their uses
  • Ans. 

    Plastics are versatile materials used in various industries for their durability, flexibility, and cost-effectiveness.

    • Plastics are commonly used in packaging materials such as bottles, containers, and bags.

    • They are also used in construction for pipes, insulation, and flooring.

    • In the automotive industry, plastics are used for interior components, bumpers, and body panels.

    • Plastics are essential in electronics for casings...

  • Answered by AI

Brakes India Interview FAQs

How many rounds are there in Brakes India Design Engineer interview?
Brakes India interview process usually has 2-3 rounds. The most common rounds in the Brakes India interview process are Technical, Resume Shortlist and One-on-one Round.
How to prepare for Brakes India Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Brakes India. The most common topics and skills that interviewers at Brakes India expect are CAD, Design Engineering, CATIA, Product Design and Unigraphics.
What are the top questions asked in Brakes India Design Engineer interview?

Some of the top questions asked at the Brakes India Design Engineer interview -

  1. What is the difference between cylindricity and roundness in GD&...read more
  2. What is the working principle of a brake syste...read more
  3. Create 3d model for the given engineering drawin...read more

Tell us how to improve this page.

Brakes India Design Engineer Interview Process

based on 2 interviews

1 Interview rounds

  • Technical Round
View more
Join Brakes India Partners for Safe Mobility
Brakes India Design Engineer Salary
based on 70 salaries
₹1.1 L/yr - ₹7 L/yr
15% less than the average Design Engineer Salary in India
View more details

Brakes India Design Engineer Reviews and Ratings

based on 15 reviews

3.8/5

Rating in categories

2.5

Skill development

3.9

Work-life balance

2.9

Salary

4.7

Job security

2.5

Company culture

1.8

Promotions

2.9

Work satisfaction

Explore 15 Reviews and Ratings
Trainee
273 salaries
unlock blur

₹0.9 L/yr - ₹3.1 L/yr

Engineer
228 salaries
unlock blur

₹3.2 L/yr - ₹9 L/yr

Junior Engineer
217 salaries
unlock blur

₹1.5 L/yr - ₹4.6 L/yr

Senior Engineer
175 salaries
unlock blur

₹5.6 L/yr - ₹12.4 L/yr

Quality Inspector
142 salaries
unlock blur

₹1.4 L/yr - ₹3.5 L/yr

Explore more salaries
Compare Brakes India with

Bosch

4.2
Compare

Samvardhana Motherson Group

3.7
Compare

MRF Tyres

3.7
Compare

UNO Minda

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview