Add office photos
Filter interviews by
Applied Materials Mechanical Engineer Interview Questions, Process, and Tips
Top Applied Materials Mechanical Engineer Interview Questions and Answers
- Q1. What we need to do if pressure valve fail in boiler
- Q2. What are the basic parts of an aeroplane and there working functions?
- Q3. How we cool a pipe in a chamber without using coolent
Applied Materials Mechanical Engineer Interview Experiences
6 interviews found
deepak verma
I applied via campus placement at Maulana Azad National Institute of Technology (NIT), Bhopal and was interviewed before Aug 2021. There were 4 interview rounds.
Basic level reasoning and simple math
(4 Questions)
- Q1. Hoop stress Heat exchanger depth Critical radius of insulation And some basic som questions
- Q2. 3-d printer discussion
- Q3. Major project discussion
- Q4. Defination of stress
- Ans.
Stress is the force per unit area that a material experiences when subjected to an external load.
Stress is a measure of the internal forces within a material.
It is calculated as force per unit area.
Stress can cause deformation or failure of a material.
There are different types of stress, such as tensile, compressive, and shear stress.
Examples of stress include the weight of a book on a table, the force applied to a bri...
(8 Questions)
- Q1. Situation based questions
- Q2. Stress strain Curve of aluminium
- Ans.
Aluminium stress strain curve shows its elastic and plastic deformation behavior under stress.
Aluminium has a linear elastic region up to a certain point, beyond which it undergoes plastic deformation.
The yield strength of aluminium is around 40-90 MPa.
Ultimate tensile strength of aluminium is around 90-200 MPa.
Aluminium has a low modulus of elasticity compared to steel.
The stress strain curve of aluminium can be affec...
- Q3. Design a chair for a class
- Ans.
Designed a chair for a class that is comfortable, durable, and ergonomic.
Consider the height of the desk and the average height of the students
Use materials that are sturdy and easy to clean
Incorporate lumbar support and adjustable features for comfort
Add armrests for additional support
Ensure the chair has a non-slip base for safety
- Q4. What applied do and how your study make change into this
- Q5. Basic laws of thermodynamics
- Ans.
Basic laws of thermodynamics
First law: Energy cannot be created or destroyed, only transferred or converted
Second law: Entropy of a closed system always increases over time
Third law: Absolute zero cannot be reached
Examples: car engine, refrigerator, power plant
- Q6. How we cool a pipe in a chamber without using coolent
- Ans.
Cooling a pipe in a chamber without coolant
Use natural convection by placing the pipe vertically and allowing air to circulate around it
Use a heat sink to absorb the heat from the pipe
Use a thermoelectric cooler to create a temperature gradient and cool the pipe
Use a phase change material to absorb the heat from the pipe
Use a heat exchanger to transfer the heat from the pipe to a cooler fluid or gas
Use a radiation shie
- Q7. What is micromaterials
- Ans.
Micromaterials refer to materials with microscale dimensions, typically less than 100 micrometers.
Micromaterials have unique properties due to their small size, such as increased surface area to volume ratio and altered mechanical, electrical, and optical properties.
Examples of micromaterials include microelectromechanical systems (MEMS), microfluidic devices, and microscale sensors.
Research in micromaterials has appli...
- Q8. What we need to do if pressure valve fail in boiler
- Ans.
If pressure valve fails in boiler, shut down the boiler immediately and isolate it from the system.
Shut down the boiler immediately to prevent any further damage.
Isolate the boiler from the system to prevent any pressure build-up.
Inspect the pressure valve to determine the cause of failure.
Replace the pressure valve with a new one.
Test the new pressure valve to ensure it is functioning properly before restarting the bo
(7 Questions)
- Q1. How you contribute with your knowledge in your society
- Q2. How you explore your college
- Q3. Condition where you show your team leader skills
- Q4. How you took you failmly member up in different field
- Q5. What is your extra skills except college study
- Q6. How you deal with a clients regarding which you don't know much
- Ans.
I research and gather information to understand the client's needs and requirements.
Ask the client questions to gather more information
Research and study the client's industry and field
Consult with colleagues or experts in the field
Provide regular updates to the client on progress and findings
Be honest about limitations and seek help when needed
- Q7. Any feedback or queries
Interview Preparation Tips
- Strength of materials
- Thermodynamics
- Manufacturing
- Design
I applied via LinkedIn and was interviewed in May 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Tell me about your experience
- Q2. High level questions on resume
(2 Questions)
- Q1. Mechanical testing related
- Q2. Deep dive in technical- FMEA, DVP&R
Selected
I applied via Naukri.com and was interviewed in Oct 2023. There were 4 interview rounds.
Reasoning & Engineering knowledge.
(2 Questions)
- Q1. Engineering Thermodynamics
- Q2. Engineering mechanics
Engineering subjects
Interview Preparation Tips
- Thermodynamics
- Strength of materials
I was interviewed in Dec 2016.
Interview Questionnaire
15 Questions
- Q1. What was KiteTech(a project undertaken in school) all about?
- Q2. Explain the working of a water rocket?
- Ans.
A water rocket works by pressurizing water and air inside a bottle, creating thrust that propels the rocket upwards.
Water and air are added to a plastic bottle, with the air pressurized using a pump or compressed air source.
When the bottle is released, the pressurized air forces the water out of the nozzle, creating a reaction force that propels the rocket upwards.
The height the rocket reaches depends on factors such a...
- Q3. What is MR Braking?
- Ans.
MR Braking stands for Magnetic Resistance Braking. It is a type of braking system used in trains and other vehicles.
MR Braking uses magnetic fields to slow down or stop a vehicle.
It is commonly used in trains as it provides a smooth and efficient braking system.
The braking force is generated by the resistance between the magnetic field and the conductive material on the train's wheels.
MR Braking is also used in roller ...
- Q4. What are the basic parts of an aeroplane and there working functions?
- Ans.
An aeroplane consists of several basic parts that work together to enable flight.
The wings generate lift and provide stability
The fuselage houses the cockpit, passengers, and cargo
The engines provide thrust to move the plane forward
The tail section includes the horizontal stabilizer and vertical fin for directional control
The landing gear allows the plane to take off and land
The avionics system includes instruments and
- Q5. What software's do you know and what are there working algorithms?
- Ans.
I know software's like AutoCAD, SolidWorks, ANSYS, MATLAB, and their working algorithms.
AutoCAD - used for 2D and 3D design and drafting
SolidWorks - used for 3D modeling and simulation
ANSYS - used for finite element analysis and computational fluid dynamics
MATLAB - used for numerical computing and data analysis
- Q6. Tell me about yourself?
- Q7. Why applied materials and not the other companies which have visited your campus since the inception of your academic year(as AMAT visited in December)?
- Q8. What is it that you look for in the job you want to take up?
- Q9. Have you given GATE or GRE?
- Q10. With such good scores, how would you assure if selected to jointed company?
- Q11. What is your story so far?
- Q12. What are the two values you value the most?
- Q13. Give examples quoting the significance of the values you value?
- Q14. What is your vision in your life?
- Q15. Give 20 applications of a stapler for any other use.
- Ans.
20 alternative uses of a stapler
As a makeshift hole puncher
To hold together a broken necklace chain
To create a makeshift zipper pull
To create a makeshift lock for a door
To create a makeshift weight for a fishing line
To create a makeshift needle for sewing
To create a makeshift screwdriver
To create a makeshift zipper repair tool
To create a makeshift paper clip
To create a makeshift zipper stopper
To create a makeshift zipp...
Interview Preparation Tips
Experience: The online test was held at the campus itself. Comprising of 60 odd questions which included 15 aptitude questions and 45 technical questions, the test was of standard difficulty level. The technical questions were from almost all the basic subjects of mechanical, like, strength of materials, fluid mechanics, dynamics of machines, machine design, turbo machinery, etc.
Tips: Aptitude is surely a scoring area, so strive to get all the 15 questions right. Also the technical questions are basic ones so with basic knowledge of the basic subjects these are also not that difficult to answer.
Duration: 1 hour
Total Questions: 60
Round: Technical Interview
Experience: The technical interview was completely a resume based interview. The questions were all based on the technicalities of the achievements, projects and papers undertaken which were mentioned in the resume.
Tips: Keep your resume strong and it should be completely honest.
Round: HR Interview
Experience: The interview which lasted for around an hour was nothing less than a formal talk. The interviewer only sought for the honesty behind all my answers, spontaneity and the thought process I adopt for doing work.
Tips: The HR completely seeks for your intent to join the company and your interest in the work they do. The interview must be completely honest and should be given unprepared.
Skills: Technical, Communication, Teamwork, Research Interests
College Name: Maulana Azad National Institute of Technology
Skills evaluated in this interview
Applied Materials interview questions for designations
Career Contrails
Get interview-ready with Top Applied Materials Interview Questions
Top trending discussions
Interview questions from similar companies
(1 Question)
- Q1. Tell me about you previous internship experience
- Ans.
I completed a 6-month internship at ABC Company where I worked on designing and testing mechanical components for automotive applications.
Designed and analyzed mechanical components using CAD software
Conducted tests and simulations to evaluate performance and durability
Collaborated with cross-functional teams to optimize designs and troubleshoot issues
Interview Preparation Tips
(2 Questions)
- Q1. WHAT COVERS YOUR INTEREST IN MOLEX AND PRODUCTS
- Ans.
I am interested in Molex and its products because of their innovative technology and impact on various industries.
Innovative technology used in Molex products
Impact of Molex products on various industries
Opportunities for growth and learning at Molex
Strong reputation and history of success
- Q2. SUBJECTS RELATED TO MOLDING AND CAST PRODUCTS
Interview Preparation Tips
ANSWER QUESTIONS SHORTLY AND LEARN MORE ABOUT first use PLASTICS
SOLIDWORKS MOLD DESIGN - fair idea is sufficient
material number knowledge necessary
I applied via Campus Placement and was interviewed in Sep 2021. There were 3 interview rounds.
Interview Questionnaire
3 Questions
- Q1. What is prandtl number?
- Ans.
Prandtl number is a dimensionless number used in fluid mechanics to describe the ratio of momentum diffusivity to thermal diffusivity.
It is named after the German physicist Ludwig Prandtl.
It is used to predict fluid flow behavior and heat transfer in different materials.
It is calculated as the ratio of kinematic viscosity to thermal diffusivity.
It is important in the study of boundary layers, turbulence, and convection...
- Q2. Why are manholes circular?
- Ans.
Manholes are circular because they cannot fall through their own opening.
Circular manholes cannot fall through their own opening, unlike square or rectangular ones.
Circular shape distributes weight evenly, making it easier to move and handle.
Circular shape also reduces the risk of injury from sharp corners.
Circular manholes are easier to manufacture and install.
Circular shape allows for easier access from any angle.
Cir...
- Q3. Explain bernoulli's equation
- Ans.
Bernoulli's equation relates the pressure, velocity, and height of a fluid in motion.
Bernoulli's equation is based on the principle of conservation of energy.
It is commonly used in fluid mechanics to analyze the flow of fluids through pipes and channels.
The equation states that as the velocity of a fluid increases, its pressure decreases, and vice versa.
It can be expressed as P + 1/2ρv^2 + ρgh = constant, where P is pr...
Interview Preparation Tips
Mechanical Maintenance Engineer Interview Questions & Answers
TDK India Private Limited
Anonymous
posted on 4 Feb 2024
Selected
I applied via Recruitment Consulltant and was interviewed before Feb 2023. There was 1 interview round.
(4 Questions)
- Q1. Material required for shaft,gear,pully manufacturing?
- Ans.
The materials required for shaft, gear, and pulley manufacturing include metals such as steel, cast iron, and aluminum.
Shafts are commonly made from steel due to its strength and durability.
Gears can be manufactured from materials like cast iron, steel, or even plastic depending on the application.
Pulleys are often made from aluminum or steel, with steel being preferred for heavy-duty applications.
Other materials like ...
- Q2. Different types of direction control valve?
- Ans.
Direction control valves are used to control the flow of fluid in a hydraulic or pneumatic system.
Solenoid-operated directional control valve
Manual directional control valve
Pilot-operated directional control valve
Proportional directional control valve
Check valve
- Q3. Mechanical engineering drawing?
- Q4. What is sequence valve?
- Ans.
A sequence valve is a type of pressure control valve that opens and allows flow when a set pressure is reached.
Sequence valves are used to ensure a specific sequence of operations in hydraulic systems.
They are typically used in applications where multiple hydraulic cylinders need to be actuated in a specific order.
When the pressure in the system reaches the set pressure of the sequence valve, it opens and allows flow t...
Interview Preparation Tips
Applied Materials Interview FAQs
Tell us how to improve this page.
Applied Materials Interviews By Designations
- Applied Materials Mechanical Engineer Interview Questions
- Applied Materials Senior Software Engineer Interview Questions
- Applied Materials Data Scientist Interview Questions
- Applied Materials Manufacturing Engineer Interview Questions
- Applied Materials Software Developer Interview Questions
- Applied Materials Software Engineer Interview Questions
- Applied Materials Technical Lead Interview Questions
- Applied Materials Design Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Mechanical Maintenance Engineer Interview Questions
- Diploma Mechanical Engineer Interview Questions
- Mechanical Technician Interview Questions
- Senior Engineer Mechanical Interview Questions
- Mechanical Supervisor Interview Questions
- Junior Mechanical Engineer Interview Questions
- Mechanical Fitter Interview Questions
- Mechanical Maintenance Fitter Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Fast track your campus placements
Applied Materials Mechanical Engineer Reviews and Ratings
based on 4 reviews
Rating in categories
|
Technical Lead
224
salaries
|  ₹11 L/yr - ₹45 L/yr |
|
Senior Software Engineer
118
salaries
| ₹8.9 L/yr - ₹33 L/yr |
|
Software Engineer
89
salaries
| ₹6 L/yr - ₹20 L/yr |
|
Manufacturing Engineer
82
salaries
| ₹5.5 L/yr - ₹16 L/yr |
|
Mechanical Engineer
61
salaries
| ₹5 L/yr - ₹16.9 L/yr |
Lam Research
KLA
ASML
Entegris
Calculate your in-hand salary
- Home >
- Interviews >
- Applied Materials Interview Questions >
- Applied Materials Mechanical Engineer Interview Questions
