Filter interviews by
I applied via Recruitment Consulltant and was interviewed in Apr 2022. There were 3 interview rounds.
I applied via Approached by Company and was interviewed before Dec 2021. There was 1 interview round.
I applied via Naukri.com and was interviewed in Mar 2022. There were 3 interview rounds.
TIG welding is used for precision welding of thin materials while MIG welding is used for thicker materials and faster welding.
TIG welding is ideal for welding aluminum, stainless steel, and other non-ferrous metals
MIG welding is commonly used for welding steel, iron, and other ferrous metals
TIG welding produces high-quality welds with minimal distortion and no spatter
MIG welding is faster and more efficient for thicke...
Yes, I am willing to relocate to the existing plant.
I am open to relocating for the right opportunity.
I understand the importance of being present at the plant for effective quality control.
I have previous experience relocating for work.
I am flexible and adaptable to new environments.
What people are saying about Applied Materials
I applied via campus placement at Maulana Azad National Institute of Technology (NIT), Bhopal and was interviewed before Aug 2021. There were 4 interview rounds.
Basic level reasoning and simple math
Stress is the force per unit area that a material experiences when subjected to an external load.
Stress is a measure of the internal forces within a material.
It is calculated as force per unit area.
Stress can cause deformation or failure of a material.
There are different types of stress, such as tensile, compressive, and shear stress.
Examples of stress include the weight of a book on a table, the force applied to a bri...
Aluminium stress strain curve shows its elastic and plastic deformation behavior under stress.
Aluminium has a linear elastic region up to a certain point, beyond which it undergoes plastic deformation.
The yield strength of aluminium is around 40-90 MPa.
Ultimate tensile strength of aluminium is around 90-200 MPa.
Aluminium has a low modulus of elasticity compared to steel.
The stress strain curve of aluminium can be affec...
Designed a chair for a class that is comfortable, durable, and ergonomic.
Consider the height of the desk and the average height of the students
Use materials that are sturdy and easy to clean
Incorporate lumbar support and adjustable features for comfort
Add armrests for additional support
Ensure the chair has a non-slip base for safety
Basic laws of thermodynamics
First law: Energy cannot be created or destroyed, only transferred or converted
Second law: Entropy of a closed system always increases over time
Third law: Absolute zero cannot be reached
Examples: car engine, refrigerator, power plant
Cooling a pipe in a chamber without coolant
Use natural convection by placing the pipe vertically and allowing air to circulate around it
Use a heat sink to absorb the heat from the pipe
Use a thermoelectric cooler to create a temperature gradient and cool the pipe
Use a phase change material to absorb the heat from the pipe
Use a heat exchanger to transfer the heat from the pipe to a cooler fluid or gas
Use a radiation shie
Micromaterials refer to materials with microscale dimensions, typically less than 100 micrometers.
Micromaterials have unique properties due to their small size, such as increased surface area to volume ratio and altered mechanical, electrical, and optical properties.
Examples of micromaterials include microelectromechanical systems (MEMS), microfluidic devices, and microscale sensors.
Research in micromaterials has appli...
If pressure valve fails in boiler, shut down the boiler immediately and isolate it from the system.
Shut down the boiler immediately to prevent any further damage.
Isolate the boiler from the system to prevent any pressure build-up.
Inspect the pressure valve to determine the cause of failure.
Replace the pressure valve with a new one.
Test the new pressure valve to ensure it is functioning properly before restarting the bo
I research and gather information to understand the client's needs and requirements.
Ask the client questions to gather more information
Research and study the client's industry and field
Consult with colleagues or experts in the field
Provide regular updates to the client on progress and findings
Be honest about limitations and seek help when needed
Applied Materials interview questions for popular designations
I applied via Company Website and was interviewed before Nov 2022. There were 4 interview rounds.
Too tough written test kind of
Get interview-ready with Top Applied Materials Interview Questions
I applied via Approached by Company
I applied via Job Portal and was interviewed before Mar 2023. There were 3 interview rounds.
ZeroOddEven program will always be asked
I applied via Approached by Company and was interviewed before Dec 2021. There were 2 interview rounds.
MCB selection and types of control systems and devices with examples.
MCB selection depends on the load current and short circuit current rating.
Types of control systems include open-loop, closed-loop, and feedback control.
Examples of control devices include sensors, actuators, and programmable logic controllers (PLCs).
I applied via Recruitment Consulltant and was interviewed before Jun 2023. There was 1 interview round.
Implement vector using c++
Poka Yoke is a technique used in manufacturing to prevent errors or mistakes from occurring.
Poka Yoke is a Japanese term that translates to 'mistake-proofing' or 'error-proofing'.
It involves designing processes or systems in a way that makes it impossible or difficult for errors to occur.
Poka Yoke techniques can include using sensors, guides, or visual cues to prevent or detect errors.
Examples of Poka Yoke include usin...
GD&T stands for Geometric Dimensioning and Tolerancing. It is a system used to define and communicate engineering tolerances.
GD&T is a symbolic language used to specify the dimensions, form, orientation, and location of features on a part.
It ensures that parts are manufactured within acceptable limits and that they fit and function properly.
GD&T uses symbols, such as concentricity, perpendicularity, and position, to co...
5S is a methodology for organizing and maintaining a clean, efficient, and safe work environment. Lean Manufacturing is a systematic approach to eliminating waste and improving efficiency.
5S focuses on five principles: Sort, Set in Order, Shine, Standardize, and Sustain.
Sort involves removing unnecessary items from the workplace.
Set in Order involves organizing and arranging necessary items in a logical and efficient m...
RPN stands for Risk Priority Number. It is a numerical value used in risk assessment to prioritize potential failures.
RPN is calculated by multiplying three factors: Severity, Occurrence, and Detection.
Severity represents the potential impact of a failure on the system or process.
Occurrence represents the likelihood of the failure occurring.
Detection represents the ability to detect the failure before it causes harm.
Th...
The duration of Applied Materials interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 54 interviews
Interview experience
based on 432 reviews
Rating in categories
Technical Lead
248
salaries
| ₹12.1 L/yr - ₹46 L/yr |
Senior Software Engineer
123
salaries
| ₹10 L/yr - ₹30 L/yr |
Manufacturing Engineer
88
salaries
| ₹5.5 L/yr - ₹17 L/yr |
Software Engineer
87
salaries
| ₹6 L/yr - ₹20.8 L/yr |
Senior Engineer Mechanical
61
salaries
| ₹9 L/yr - ₹20 L/yr |
Lam Research
KLA
ASML
Entegris