Filter interviews by
I appeared for an interview in Sep 2024, where I was asked the following questions.
DPT stands for Dye Penetrant Testing in the Non-Destructive Testing (NDT) process.
DPT is a method used to detect surface-breaking defects in non-porous materials.
The process involves applying a liquid dye penetrant to the surface of the material, allowing it to seep into any cracks or defects.
After a certain dwell time, excess penetrant is removed and a developer is applied to draw out the penetrant from the defects, m...
Erection sequence refers to the order in which components of a structure are assembled to ensure stability and safety.
Erection sequence typically starts with the foundation and then progresses to the structural frame.
Next, walls and floors are added followed by roof installation.
Finally, finishing touches such as windows, doors, and interior fittings are completed.
An example of erection sequence for a building would be...
Erection productivity in structure refers to the efficiency and speed at which the construction of a building or infrastructure is completed.
Erection productivity is influenced by factors such as skilled labor availability, equipment efficiency, and project management.
Efficient planning and coordination among different teams can improve erection productivity.
Using prefabricated components can also help speed up the ere...
Erection tolerance for a column refers to the acceptable level of deviation from verticality or straightness.
Erection tolerance is typically specified in the project's design or construction documents.
Common erection tolerances for columns are around 1/500 to 1/1000 of the column height.
Tolerances may vary based on the material of the column and its intended use.
Erection tolerance ensures structural integrity and aesth
Various codes are applicable for structure erection depending on the country and type of structure.
The International Building Code (IBC) is commonly used in the United States for structural requirements.
Eurocode is used in European countries for structural design and construction.
British Standards (BS) are also commonly used in the UK for structural engineering.
Local building codes and regulations may also apply depend
A lift plan for erection is a detailed plan outlining the process of safely lifting and placing heavy equipment or materials during construction.
Identify the weight and dimensions of the equipment or materials to be lifted
Determine the location for the lift and assess any obstacles or hazards
Select the appropriate lifting equipment such as cranes or hoists
Calculate the load capacity and ensure it does not exceed the eq...
How many manpower is required for complete the 500mt erection in one month.
Seeking new challenges and growth opportunities in a larger organization.
Desire for career advancement
Looking for new challenges
Seeking opportunities for professional growth
Interested in a larger organization with more resources
Want to broaden my skill set
My expected CTC is negotiable based on the responsibilities and benefits offered for the Deputy Manager position.
My expected CTC is based on industry standards and my experience level.
I am open to discussing the salary range during the interview process.
I am looking for a competitive salary package with additional benefits such as health insurance and performance bonuses.
I appeared for an interview before Mar 2024, where I was asked the following questions.
I applied via Approached by Company and was interviewed in Feb 2024. There was 1 interview round.
The critical piping welding procedure for main steam and HRH line joints involves several steps to ensure proper joint integrity and safety.
Preparation of the welding area by cleaning and removing any contaminants
Selection of appropriate welding materials and techniques based on the specific requirements of the joint
Welding of the joint using approved procedures and qualified welders
Inspection of the weld to ensure it ...
Alkali flushing and steam blowing are procedures used to clean pipelines and equipment in power plants and industrial settings.
Alkali flushing involves circulating a solution of alkali through the pipelines to remove impurities and deposits.
Steam blowing uses high-pressure steam to remove any remaining debris and ensure the pipelines are clean and ready for operation.
Both procedures are essential for maintaining the ef...
Adani Infra interview questions for designations
I applied via Referral and was interviewed before Feb 2022. There were 3 interview rounds.
Piling work involves driving piles into the ground to provide support for structures. The procedure includes several steps.
Site preparation and surveying
Pile installation using equipment such as pile drivers or hydraulic hammers
Testing and inspection of piles to ensure they meet design specifications
Cutting and capping of piles to finish the installation process
Backfilling and site restoration
Examples of piling work in...
Get interview-ready with Top Adani Infra Interview Questions
I applied via Approached by Company and was interviewed before Jul 2021. There were 2 interview rounds.
Planning for execution and laying of bituminous involves detailed scheduling, coordination, and quality control.
Develop a detailed project plan outlining tasks, timelines, and resources required
Coordinate with suppliers for timely delivery of materials
Ensure proper equipment and manpower are available for the execution
Implement quality control measures to ensure the final product meets specifications
Regularly monitor p...
posted on 24 Feb 2024
posted on 17 Dec 2023
I applied via Approached by Company and was interviewed in Jun 2023. There were 4 interview rounds.
posted on 10 Jan 2025
I applied via Approached by Company and was interviewed in Jul 2024. There were 4 interview rounds.
Office work in team management
Me one company manager in all my team handling in company work
Meri company ko meri puri team ka sahoyg milta he
Technical problems in a company can range from software bugs to hardware malfunctions.
Software bugs causing system crashes or errors
Hardware malfunctions leading to equipment failures
Network issues causing slow internet or connectivity problems
Outdated technology hindering productivity
Lack of IT support for troubleshooting and maintenance
based on 5 interviews
Interview experience
based on 15 reviews
Rating in categories
Assistant Manager
115
salaries
| ₹6.5 L/yr - ₹15 L/yr |
Deputy Manager
75
salaries
| ₹10.1 L/yr - ₹20 L/yr |
Associate Manager
59
salaries
| ₹13.4 L/yr - ₹25 L/yr |
Senior Engineer
41
salaries
| ₹5.7 L/yr - ₹12 L/yr |
Manager
27
salaries
| ₹19.9 L/yr - ₹33 L/yr |
Patel Infrastructure
CTS Consulting & Technical Support
J K Fenner
Saudi Binladin Group