Filter interviews by
I have gained extensive experience in project management, team leadership, and strategic planning over the past eight years.
Led multiple cross-functional teams to successfully complete projects on time and within budget
Developed and implemented strategic plans to drive business growth and increase profitability
Managed stakeholder relationships and communicated effectively at all levels
Utilized data analysis and problem...
I applied via Job Portal and was interviewed in Jun 2024. There was 1 interview round.
Hydrostatic Head unit is a measure of water resistance in textiles. Formula: HH = height of water column in mm.
Hydrostatic Head unit measures the pressure water exerts on a fabric.
Formula: HH = height of water column in mm.
Higher HH value indicates better water resistance.
Example: Fabric with HH of 10,000mm can withstand a 10,000mm water column before leaking.
The largest unit of density is g/cm^3. Water is not directly used in drilling due to its low density compared to drilling fluids.
The largest unit of density is grams per cubic centimeter (g/cm^3)
Water has a density of 1 g/cm^3, which is relatively low compared to drilling fluids
Drilling fluids are used in drilling operations to provide lubrication, cooling, and pressure control
Packer is used for creating identical machine images for multiple platforms from a single source configuration.
Packer helps in automating the process of creating machine images for different platforms like AWS, Azure, VMware, etc.
It allows for consistent and repeatable builds, ensuring that the images are always up-to-date and secure.
Packer can be integrated with configuration management tools like Ansible, Chef, or Pu...
Newton's 1st law states that an object will remain at rest or in uniform motion unless acted upon by an external force. The 2nd law states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass.
1. Newton's 1st Law: An object will remain at rest or in uniform motion unless acted upon by an external force.
2. Newton's 2nd Law: The acceleration of an...
Bernoulli's principle states that as the speed of a fluid increases, its pressure decreases.
The principle is based on the conservation of energy in a flowing fluid.
It is commonly used in aviation to explain lift on an airplane's wings.
Another example is the flow of water through a pipe where the pressure decreases as the velocity increases.
Hg is used in barometers due to its high density, low vapor pressure, and wide liquid range.
Hg has a high density, allowing for accurate measurement of atmospheric pressure
Hg has a low vapor pressure, ensuring that the liquid remains in the barometer tube
Hg has a wide liquid range, making it suitable for measuring a wide range of pressures
Density is a measure of how much mass is contained in a given volume.
Density is calculated by dividing the mass of an object by its volume.
It is commonly expressed in units such as grams per cubic centimeter (g/cm^3) or kilograms per liter (kg/L).
Objects with higher density have more mass packed into a smaller volume, while objects with lower density have less mass spread out over a larger volume.
For example, lead has ...
I applied via Company Website and was interviewed in Feb 2024. There was 1 interview round.
CNC stands for Computer Numerical Control. It is a technology used in manufacturing processes to control machine tools and equipment.
CNC is a technology that uses computer software to control machine tools and equipment for manufacturing processes.
CNC machines can perform tasks such as cutting, drilling, milling, and shaping materials with high precision and accuracy.
CNC programming involves writing instructions for th...
Tolerance in CNC machining refers to the allowable deviation from a specified dimension or feature.
Tolerance is the acceptable range of variation in a dimension or feature of a part.
It ensures that parts fit together properly and function as intended.
Tolerance is typically specified in units such as millimeters or inches.
For example, a hole may have a tolerance of +/- 0.1mm, meaning it can be 0.1mm larger or smaller th...
Knowledge of CAM CNC programming involves understanding how to create toolpaths and generate G-code for CNC machines.
Understanding CAM software and its features
Creating toolpaths for different machining operations
Generating G-code for CNC machines
Optimizing toolpaths for efficiency and accuracy
Wellcare Oil Tools interview questions for popular designations
I applied via Indeed and was interviewed in Jun 2023. There were 3 interview rounds.
Relatable questions related to your graduation or other some basics questions from schooling.
Vernier caliper is a precision measuring tool used to measure dimensions with high accuracy.
Used to measure the internal and external dimensions of an object
Consists of a main scale and a sliding vernier scale for more precise measurements
Commonly used in engineering, machining, and manufacturing industries
Example: Measuring the diameter of a shaft or the thickness of a sheet metal
Iron carbon diagram shows the phases of iron and carbon at different temperatures.
Iron carbon diagram is a graphical representation of the phases of iron and carbon at different temperatures.
It shows the phases such as austenite, ferrite, cementite, and pearlite.
The diagram helps in understanding the microstructure of steel and its properties.
The diagram is used in heat treatment processes to control the properties of
Four stroke engines have four stages (intake, compression, power, exhaust) per cycle, while two stroke engines have only two stages (compression, power).
Four stroke engines have separate intake and exhaust strokes, while two stroke engines combine intake and exhaust in one stroke.
Four stroke engines are more fuel efficient and produce less emissions compared to two stroke engines.
Examples of four stroke engines include...
I applied via Walk-in and was interviewed in Jul 2021. There were 3 interview rounds.
Top trending discussions
I applied via Referral and was interviewed in Apr 2024. There were 2 interview rounds.
I am a highly motivated and experienced professional with a strong background in project management and team leadership.
Over 8 years of experience in project management
Proven track record of successfully leading cross-functional teams
Strong communication and problem-solving skills
Proficient in various project management tools such as Microsoft Project and Jira
Setting fake goals and making employees work towards them can be demotivating and harmful to morale.
Fake goals can lead to wasted time and effort
Employees may feel deceived and lose trust in management
Realistic and achievable goals are essential for employee motivation and success
I applied via Company Website and was interviewed in Oct 2022. There were 2 interview rounds.
I applied via Recruitment Consulltant and was interviewed before May 2022. There were 5 interview rounds.
Basic plc, modbus and ring topology related questions
Ring topology is a network topology where each device is connected to exactly two other devices, creating a circular network.
Devices are connected in a circular manner
Data flows in one direction
Failure of one device can affect the entire network
Examples include Token Ring and SONET
Modbus is a communication protocol used for transmitting data over serial lines between electronic devices.
Modbus is used in industrial automation systems to connect a supervisory computer with remote terminal units (RTUs) and programmable logic controllers (PLCs).
It uses a master-slave architecture where the master initiates the communication and the slaves respond to the requests.
Modbus supports different data types ...
I am looking for a competitive salary and better growth opportunities. I am leaving my last company due to lack of growth and learning opportunities.
I am seeking a salary that is competitive with industry standards
I am looking for better growth opportunities and a chance to learn new skills
My previous company did not offer the growth and learning opportunities I was looking for
I am excited about the potential for growt
based on 12 interviews
Interview experience
based on 53 reviews
Rating in categories
Design Engineer
29
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
19
salaries
| ₹0 L/yr - ₹0 L/yr |
Planning Engineer
12
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Executive
8
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
7
salaries
| ₹0 L/yr - ₹0 L/yr |
Baker Hughes
Schlumberger
Halliburton
Weatherford