Upload Button Icon Add office photos

Filter interviews by

Indraprastha Gas Interview Questions, Process, and Tips

Updated 29 Jan 2025

Top Indraprastha Gas Interview Questions and Answers

View all 16 questions

Indraprastha Gas Interview Experiences

Popular Designations

20 interviews found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Sep 2024. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Clouds are just water vapor, so why do they move?
  • Ans. 

    Clouds move due to the combination of wind, temperature, and pressure differences in the atmosphere.

    • Clouds are carried along by the wind in the atmosphere.

    • Temperature differences cause air to rise or sink, affecting cloud movement.

    • Pressure variations also play a role in cloud motion.

    • For example, warm air rising from the ground can create cumulus clouds that move with the wind.

  • Answered by AI
  • Q2. What keeps space empty?
  • Ans. 

    Space is empty due to the extremely low density of matter and the vast distances between objects.

    • Space is mostly empty because of the low density of matter in the universe.

    • The vast distances between celestial bodies also contribute to the emptiness of space.

    • Even though space is not completely empty and contains various particles and radiation, it is considered a vacuum due to the low density of matter.

  • Answered by AI
  • Q3. Why don't the gases in the atmosphere separate out according to mass
  • Ans. 

    Gases in the atmosphere do not separate out according to mass due to the constant mixing caused by wind and turbulence.

    • Constant mixing caused by wind and turbulence prevents gases from separating based on mass

    • Gravity also plays a role in keeping gases well-mixed in the atmosphere

    • Different gases have different molecular weights but are still evenly distributed in the atmosphere

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Where does the atmosphere end? Where is the edge of space?
  • Ans. 

    The atmosphere gradually thins out as altitude increases, eventually merging into outer space.

    • The atmosphere is composed of several layers, with the exosphere being the outermost layer before transitioning into space.

    • The Kármán line, located at an altitude of 100 km (62 miles) above sea level, is often considered the boundary between Earth's atmosphere and outer space.

    • Beyond the Kármán line, the atmosphere becomes extr...

  • Answered by AI
  • Q2. Why does the air only contain water vapor and not other kinds of vapors?
  • Ans. 

    Air mainly contains water vapor due to the evaporation of water bodies, plants, and human activities.

    • Water vapor is the most abundant gas in the atmosphere due to evaporation from oceans, lakes, rivers, and plants.

    • Other vapors like alcohol, gasoline, or perfume are present in the air but in much lower concentrations compared to water vapor.

    • Water vapor is constantly being added to the air through processes like transpir...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I'm currently need to job

Junior Mechanical Engineer Interview Questions asked at other Companies

Q1. How to improve cycle time and how to do rejection control
View answer (1)
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. What is your educational background?
Round 2 - Technical 

(1 Question)

  • Q1. Mdpe testing & gi testing

Inspection Engineer Interview Questions asked at other Companies

Q1. What is least count of any measuring instrument?
View answer (2)

NGN Engineer Interview Questions & Answers

user image magic channel

posted on 19 Dec 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

These tests often include verbal

Round 2 - Group Discussion 

There is a group for special discussions

Interview Preparation Tips

Interview preparation tips for other job seekers - Customer Support:

Address customer complaints regarding gas supply.

Guide customers on safe usage of gas appliances.

Technician Interview Questions & Answers

user image Anonymous

posted on 5 Dec 2023

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(6 Questions)

  • Q1. Igl ka full name
  • Q2. Png ka full name
  • Q3. Cng ka full name
  • Ans. 

    CNG stands for Compressed Natural Gas.

    • CNG is a type of fuel that is used as an alternative to gasoline or diesel.

    • It is composed mainly of methane gas and is stored under high pressure.

    • CNG is commonly used in vehicles, especially in public transportation.

    • It is considered a cleaner and more environmentally friendly fuel compared to traditional fossil fuels.

    • CNG can be used in both spark-ignition and compression-ignition e

  • Answered by AI
  • Q4. India ki sabse badi gas company kon hi
  • Q5. Cng gas kis cheez se banti hi
  • Q6. Metheen gas ch4

Interview Preparation Tips

Interview preparation tips for other job seekers - god

Technician Interview Questions asked at other Companies

Q1. What kinds of pipe used for hot and cold water supply ?
View answer (7)

Indraprastha Gas interview questions for popular designations

 Inspection Engineer

 (3)

 Manager

 (2)

 Fire & Safety Supervisor

 (1)

 Fire Supervisor

 (1)

 General Manager

 (1)

 Graduate Engineer

 (1)

 Graduate Engineer Trainee (Get)

 (1)

 Junior Mechanical Engineer

 (1)

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via LinkedIn and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Group Discussion 

It is wonderful and the topics given is related to industry and energy

Round 2 - HR 

(2 Questions)

  • Q1. In this round, all the questions asked are basic from your 3rd, 4th sem
  • Q2. DBMS and Algorithms

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well and study briefly about your fielf

Graduate Engineer Interview Questions asked at other Companies

Q1. What is Finite Element Analysis? Explain using examples.
View answer (1)

Get interview-ready with Top Indraprastha Gas Interview Questions

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via Campus Placement and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Aptitude: GK, GS, Math and Reasoning

Round 2 - Technical 

(3 Questions)

  • Q1. What is Entropy and what is the unit of Entropy?
  • Ans. 

    Entropy is a measure of disorder or randomness in a system. Its unit is joules per kelvin (J/K).

    • Entropy quantifies the number of possible microstates in a system

    • It is a measure of the system's energy dispersal or the degree of randomness

    • Entropy increases with an increase in disorder or randomness

    • The unit of entropy is joules per kelvin (J/K)

    • Entropy can be calculated using statistical mechanics or thermodynamics

    • Example:...

  • Answered by AI
  • Q2. Which engine is best 2 strokes or 4 strokes?
  • Ans. 

    Both engines have their own advantages and disadvantages depending on the application.

    • 2-stroke engines are lighter and have higher power-to-weight ratio, making them ideal for small applications like chainsaws and mopeds.

    • 4-stroke engines are more fuel-efficient and have a longer lifespan, making them ideal for larger applications like cars and boats.

    • Environmental concerns have led to a decline in the use of 2-stroke en...

  • Answered by AI
  • Q3. It totally depends on you what you want. If you want power then go for 2 Strokes engine and if you want efficiency then go for 4 Stroke.

Interview Preparation Tips

Interview preparation tips for other job seekers - IGL Keep smiling and answer confidently.gehsrbrwekgvbkwejhbfvwefhiwuehuhfwejndkjeiuwhihwi

Graduate Engineer Trainee (Get) Interview Questions asked at other Companies

Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Difference between Otto cycle and Diesel cycle? What is the process of both cycle and what is the effeciency of both cycle ? Which one is good in effeciency? Q:3 Difference between... read more
View answer (2)
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Dec 2022. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. How to do work in igl.
  • Ans. 

    To work in IGL, one must have knowledge of inspection techniques and equipment used in the oil and gas industry.

    • Understand the inspection requirements and standards set by IGL

    • Use appropriate inspection techniques and equipment

    • Ensure compliance with safety regulations

    • Maintain accurate records of inspections and findings

    • Communicate effectively with team members and clients

    • Continuously improve knowledge and skills through...

  • Answered by AI
  • Q2. What type of work in Bonace.

Interview Preparation Tips

Interview preparation tips for other job seekers - Again I want to do inspection engineer job in Greater Noida.

Inspection Engineer Interview Questions asked at other Companies

Q1. What is least count of any measuring instrument?
View answer (2)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is specifications code of mdpe pipe
  • Ans. 

    The specifications code of MDPE pipe varies depending on the manufacturer and intended use.

    • MDPE pipes are commonly used for gas and water distribution systems

    • Some common specifications codes for MDPE pipes include ISO 4437, ASTM D2513, and AS/NZS 4130

    • The specifications code will provide information on the pipe's dimensions, pressure rating, and material composition

  • Answered by AI
  • Q2. Is-14885 specifications code of mdpe pipe
  • Ans. 

    Yes, IS-14885 is a specification code for MDPE pipes.

    • IS-14885 is a standard specification for Medium Density Polyethylene (MDPE) pipes.

    • It covers the requirements for MDPE pipes for water supply and gas distribution.

    • The specification includes dimensions, physical properties, performance requirements, and testing methods.

    • MDPE pipes complying with IS-14885 are widely used in India for various applications.

    • The specificatio...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - All employee work with seafty and his responsibility

Tpi Inspection Engineer Interview Questions asked at other Companies

Q1. Is-14885 specifications code of mdpe pipe
View answer (1)
Round 1 - One-on-one 

(2 Questions)

  • Q1. What do you mean by mdpe?
  • Ans. 

    MDPE stands for Medium Density Polyethylene.

    • MDPE is a type of plastic commonly used in the manufacturing of pipes and fittings.

    • It has a higher density than LDPE (Low Density Polyethylene) but lower than HDPE (High Density Polyethylene).

    • MDPE is known for its excellent resistance to stress cracking and good chemical resistance.

    • It is often used for gas and water distribution systems, as well as in the agricultural and min

  • Answered by AI
  • Q2. Medium density polyethylene It is used to keep gas underground to main chamber It is of various dimensions such as 20mm 40mm etc

Interview Preparation Tips

Topics to prepare for Indraprastha Gas Third Party Inspector interview:
  • Gi and mdpe
Interview preparation tips for other job seekers - Do your best in your worst possible manner

Third Party Inspector Interview Questions asked at other Companies

Q1. What do you mean by mdpe?
View answer (1)

I applied via Naukri.com and was interviewed in Jun 2022. There were 11 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Manish kumar BA complete h indraprasth Gas limited me job karta hu or lic ka agent bhi hu
Round 2 - HR 

(1 Question)

  • Q1. Kya mujhe job mil sakti h
Round 3 - HR 

(1 Question)

  • Q1. Me work at home job chahata hu
Round 4 - HR 

(1 Question)

  • Q1. Kya mujhe calling ,chat job h
Round 5 - HR 

(1 Question)

  • Q1. Kya email chat job h
Round 6 - Assignment 

Me mehnat or imandari work karenge

Round 7 - Assignment 

Me bahut hard worker hu

Round 8 - Coding Test 

Kya app online test lenge

Round 9 - Case Study 

Kya aap work ki training denge

Round 10 - Assignment 

Mujhe aap mouka denge

Round 11 - Group Discussion 

Mujhe sangthan me mouka denge

Interview Preparation Tips

Interview preparation tips for other job seekers - Mehnat or lagan se karen safalta milegi h

Sales Executive (Dse) Interview Questions asked at other Companies

Q1. What about maruti suzuki?
View answer (2)

Indraprastha Gas Interview FAQs

How many rounds are there in Indraprastha Gas interview?
Indraprastha Gas interview process usually has 2-3 rounds. The most common rounds in the Indraprastha Gas interview process are HR, Resume Shortlist and Technical.
How to prepare for Indraprastha Gas interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Indraprastha Gas. The most common topics and skills that interviewers at Indraprastha Gas expect are Contracts, Legal Documentation, Litigation, Consumer and Criminal.
What are the top questions asked in Indraprastha Gas interview?

Some of the top questions asked at the Indraprastha Gas interview -

  1. What is Entropy and what is the unit of Entro...read more
  2. Why does the air only contain water vapor and not other kinds of vapo...read more
  3. Where does the atmosphere end? Where is the edge of spa...read more
How long is the Indraprastha Gas interview process?

The duration of Indraprastha Gas interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

Indraprastha Gas Interview Process

based on 25 interviews

Interview experience

4.6
  
Excellent
View more

Interview Questions from Similar Companies

Shell Interview Questions
4.0
 • 191 Interviews
Torrent Gas Interview Questions
3.2
 • 49 Interviews
Adani Gas Interview Questions
3.3
 • 29 Interviews
Gujarat Gas Interview Questions
4.0
 • 12 Interviews
Gail Gas Interview Questions
4.2
 • 6 Interviews
Green Gas Interview Questions
4.2
 • 6 Interviews
Sabarmati Gas Interview Questions
4.0
 • 3 Interviews
View all

Indraprastha Gas Reviews and Ratings

based on 314 reviews

4.0/5

Rating in categories

3.7

Skill development

3.8

Work-life balance

3.6

Salary

3.5

Job security

3.7

Company culture

3.2

Promotions

3.7

Work satisfaction

Explore 314 Reviews and Ratings
Inspection Engineer
163 salaries
unlock blur

₹2.4 L/yr - ₹5 L/yr

Deputy Manager
68 salaries
unlock blur

₹5.6 L/yr - ₹15.9 L/yr

Shift Engineer
52 salaries
unlock blur

₹2 L/yr - ₹4.4 L/yr

Additional Manager
45 salaries
unlock blur

₹12 L/yr - ₹20 L/yr

Site Engineer
42 salaries
unlock blur

₹1.8 L/yr - ₹4 L/yr

Explore more salaries
Compare Indraprastha Gas with

Adani Gas

3.3
Compare

Gujarat Gas

4.0
Compare

Maharashtra Natural GAS

3.6
Compare

Gail Gas

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview