Upload Button Icon Add office photos

Filter interviews by

Vitson Steel Interview Questions and Answers

Be the first one to contribute and help others!

Interview questions from similar companies

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

The HR policy is very bad. The notice period there is 2 months for Assistant Manager and 3 months for Deputy Manager. If you do not serve the notice period, they deduct the gross salary and not the basic salary. And they do not give any full and final breakup certificate.
Because the company I was joining had bought my notice period. But Bharat Wire did not give me any full and final breakup certificate. Due to this, the company I joined did not give me the notice period money. My amount was about 83000 rupees. My money got lost because of Bharat Wire.
I emailed HR many times. But HR did not reply to my email.
If I talk specifically about the electrical department, there is rule of two people who talk like non-technical. And they do not have the manners to talk to seniors and juniors. Only those who do not know anything and who can bear their abuses are working there.
I would especially refuse to join this electrical department as long as these people are there. Even if you join there, within a week you will feel that we took a wrong decision. And you will be mentally stressed. Because you will be tortured so much. The electrical department has a completely toxic environment.
The canteen food is absolutely bad. Even dogs would not like such food.
Bharat Wire had a very good image in the market long ago. People wanted to join this company.
but today no one wants to join Bharat Wire whoever comes to know about it. That is why before joining, people connect with people on LinkedIn and take feedback, which is also right.

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Oct 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. What About concrete mix?
  • Ans. 

    Concrete mix refers to the combination of ingredients used to create concrete, including cement, aggregates, water, and admixtures.

    • Concrete mix typically consists of cement, aggregates (such as sand and gravel), water, and sometimes admixtures.

    • The ratio of these ingredients can vary depending on the desired strength, workability, and durability of the concrete.

    • For example, a common concrete mix for general use is 1 par...

  • Answered by AI
  • Q2. What is retarder in concrete mix?
  • Ans. 

    Retarder in concrete mix is a chemical additive used to slow down the setting time of concrete.

    • Retarders help in preventing the concrete from setting too quickly, allowing more time for placement and finishing.

    • They are commonly used in hot weather conditions to prevent premature setting.

    • Examples of retarders include lignosulfonates, sugars, and citric acid.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - If you get a job opportunity please first select your location after research. And then go for it.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is P2P process
  • Ans. 

    P2P process stands for Procure-to-Pay process, which involves the steps from requisitioning goods/services to making payment.

    • P2P process starts with the requisition of goods or services needed by a department.

    • Next, the purchase order is created and sent to the supplier for approval.

    • Upon receiving the goods/services, the invoice is matched with the purchase order and goods receipt.

    • Finally, payment is made to the supplie...

  • Answered by AI
  • Q2. What is ARC making
  • Ans. 

    ARC is a company that specializes in manufacturing and selling industrial equipment.

    • ARC is known for producing high-quality machinery for various industries.

    • They have a wide range of products including industrial robots, conveyor systems, and automated assembly lines.

    • ARC has a strong reputation for innovation and customer satisfaction in the industrial equipment market.

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - One-on-one 

(13 Questions)

  • Q1. What is power factor
  • Ans. 

    Power factor is a measure of how effectively electrical power is being used in a circuit.

    • Power factor is the ratio of real power (in watts) to apparent power (in volt-amperes).

    • It indicates the efficiency of electrical equipment in converting electrical power into useful work.

    • A power factor of 1 means all the power is being used effectively, while a power factor less than 1 indicates wastage of power.

    • Inductive loads lik...

  • Answered by AI
  • Q2. What is different between MCB and dol Starter
  • Ans. 

    MCB and DOL Starter are both electrical devices used for protection and control, but they have different applications.

    • MCB stands for Miniature Circuit Breaker, while DOL Starter stands for Direct-On-Line Starter.

    • MCB is used for protecting electrical circuits from overcurrents and short circuits, while DOL Starter is used for starting and stopping motors.

    • MCB is a compact device that can be manually reset after tripping,...

  • Answered by AI
  • Q3. What is ragistance
  • Ans. 

    Resistance is the opposition to the flow of electric current in a circuit.

    • Resistance is measured in ohms (Ω).

    • It is caused by factors such as the material of the conductor, its length, and its cross-sectional area.

    • Resistance can be calculated using Ohm's Law: R = V/I, where R is resistance, V is voltage, and I is current.

    • Higher resistance leads to lower current flow.

    • Examples of resistance include the filament in a light

  • Answered by AI
  • Q4. What is timer and used
  • Ans. 

    A timer is a device used to measure and control the passage of time.

    • Timers are commonly used in various electrical and electronic systems.

    • They can be used for scheduling and automating tasks.

    • Timers can be digital or analog, and may have different modes of operation such as countdown or interval timing.

    • Examples of timer applications include turning lights on and off at specific times, controlling the duration of industr...

  • Answered by AI
  • Q5. What is relay what do work
  • Ans. 

    A relay is an electrical device that acts as a switch, using an electromagnet to control the flow of current in a circuit.

    • Relays are used to control high-power devices with low-power signals.

    • They consist of an electromagnet, a set of contacts, and a spring.

    • When the coil of the electromagnet is energized, it creates a magnetic field that attracts the contacts, closing the circuit.

    • Relays are commonly used in industrial a...

  • Answered by AI
  • Q6. What is vfd
  • Ans. 

    VFD stands for Variable Frequency Drive.

    • VFD is an electronic device used to control the speed and torque of an electric motor.

    • It converts fixed frequency and voltage input into variable frequency and voltage output.

    • VFDs are commonly used in industrial applications to save energy and improve motor control.

    • They can be found in HVAC systems, pumps, fans, conveyors, and other motor-driven equipment.

    • VFDs allow for precise c...

  • Answered by AI
  • Q7. What is ac motor
  • Ans. 

    An AC motor is an electric motor that operates on alternating current, converting electrical energy into mechanical energy.

    • AC motor stands for Alternating Current motor.

    • It is commonly used in various applications such as industrial machinery, appliances, and HVAC systems.

    • AC motors consist of a stator and a rotor.

    • The stator contains coils that produce a rotating magnetic field when supplied with AC current.

    • The rotor, wh...

  • Answered by AI
  • Q8. What is no nc push botton
  • Ans. 

    A NO NC push button is a type of push button switch that has normally open (NO) and normally closed (NC) contacts.

    • NO NC push buttons are commonly used in electrical circuits to control the flow of current.

    • The NO contact is open when the button is not pressed and closes when the button is pressed.

    • The NC contact is closed when the button is not pressed and opens when the button is pressed.

    • These push buttons are often use...

  • Answered by AI
  • Q9. What is rectifier
  • Ans. 

    A rectifier is an electrical device that converts alternating current (AC) to direct current (DC).

    • Rectifiers are commonly used in power supplies to convert AC voltage to DC voltage.

    • They are essential in many electronic devices, such as computers, televisions, and smartphones.

    • Rectifiers can be classified into different types, including half-wave rectifiers, full-wave rectifiers, and bridge rectifiers.

    • They typically cons...

  • Answered by AI
  • Q10. What is induction slipring motor
  • Ans. 

    An induction slipring motor is a type of motor that uses slip rings to provide power to the rotor winding.

    • An induction slipring motor is also known as a wound rotor motor.

    • It consists of a stator, rotor, and slip rings.

    • The slip rings are connected to external resistors or other devices.

    • The slip rings allow external control of the rotor circuit.

    • This type of motor is commonly used in applications where high starting torqu...

  • Answered by AI
  • Q11. What is different between ocv and acv
  • Ans. 

    OCV stands for Open Circuit Voltage and ACV stands for Alternating Current Voltage.

    • OCV is the voltage measured when there is no load connected to a circuit.

    • ACV is the voltage of an alternating current, which periodically changes direction.

    • OCV is typically measured using a voltmeter, while ACV is measured using an oscilloscope.

    • OCV is commonly used to determine the state of charge of a battery, while ACV is used to measu...

  • Answered by AI
  • Q12. What is relay
  • Ans. 

    A relay is an electrically operated switch that uses an electromagnet to mechanically control the opening and closing of contacts.

    • Relays are commonly used in electrical systems to control high-power devices with low-power signals.

    • They are used to isolate circuits, amplify signals, and provide electrical protection.

    • Relays can be found in various applications such as industrial machinery, automotive systems, and home app...

  • Answered by AI
  • Q13. What is. a.c.v
  • Ans. 

    a.c.v stands for alternating current voltage.

    • a.c.v refers to the voltage of an alternating current (AC) system.

    • It is the measurement of the electrical potential difference in an AC circuit.

    • AC voltage constantly changes direction and magnitude over time.

    • It is typically measured in volts (V).

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. What is different ac motor and dc motor
  • Ans. 

    AC motors and DC motors differ in their power source and construction.

    • AC motors run on alternating current, while DC motors run on direct current.

    • AC motors use an alternating magnetic field to generate torque, while DC motors use a permanent magnet or electromagnet.

    • AC motors are typically more efficient and require less maintenance than DC motors.

    • AC motors are commonly used in household appliances, industrial machinery...

  • Answered by AI
  • Q2. What is diode
  • Ans. 

    A diode is an electronic component that allows current to flow in one direction and blocks it in the opposite direction.

    • Diodes are commonly used in rectifier circuits to convert AC to DC.

    • They have two terminals: an anode (positive) and a cathode (negative).

    • When the voltage across a diode is forward-biased, it allows current to flow.

    • When the voltage is reverse-biased, it blocks the current.

    • Diodes are used in various app...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I am Raja kushwaha I read shree nath ji institute for technical education I do diploma electrical engineering I have five years experience

Skills evaluated in this interview

Manager Detailing Interview Questions & Answers

Tata Steel Downstream Products user image Anonymous

posted on 17 Jul 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Introduce yourself
  • Q2. What work you have done in past
Round 2 - Technical 

(2 Questions)

  • Q1. Introduce yourself
  • Q2. Explain your design work
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - Technical 

(5 Questions)

  • Q1. Knowledge about HT & LT panels
  • Q2. Knowledge about HT motors like ball mill motors
  • Q3. You have must knowledge about abb umc100
  • Q4. Knowledge about transformers.
  • Q5. Knowledge about conveyor zss,BSS,pcs.
Round 2 - HR 

(2 Questions)

  • Q1. Family background & privious company details
  • Q2. Salary discussion
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Feb 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

Distributor and channel sale

Round 2 - Group Discussion 

Target and scheme achement

Round 3 - HR 

(4 Questions)

  • Q1. Salary structure
  • Q2. Area of marketing and market net work
  • Q3. Engineer and messon meeting
  • Q4. Joint meeting Engineer and masson
Round 4 - Technical 

(3 Questions)

  • Q1. Technical support and advertisement
  • Q2. Mason and Engineer scheme
  • Q3. Joint meeting with Engineer.

Interview Preparation Tips

Interview preparation tips for other job seekers - If you selected I will served of best of capability
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. How to manage your work
  • Ans. 

    I manage my work by prioritizing tasks, setting goals, delegating when necessary, and maintaining open communication with my team.

    • Prioritize tasks based on deadlines and importance

    • Set clear goals and create a plan to achieve them

    • Delegate tasks to team members based on their strengths and workload

    • Maintain open communication with team members to ensure everyone is on the same page

    • Use tools like project management softwar

  • Answered by AI
  • Q2. What is your project in your organization
  • Ans. 

    My project in the organization is to implement a new customer relationship management system to improve efficiency and customer satisfaction.

    • Implementing a new CRM system to streamline customer interactions

    • Training employees on how to use the new system effectively

    • Gathering feedback from customers to make necessary improvements

    • Analyzing data from the CRM system to identify trends and opportunities for growth

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. How much your pakage
  • Q2. Why do you want this job
  • Ans. 

    I am passionate about leading teams and driving strategic initiatives to achieve organizational goals.

    • I have a proven track record of successfully leading teams and implementing strategic plans in my previous roles.

    • I am excited about the opportunity to contribute my skills and experience to help the company achieve its objectives.

    • I am motivated by the challenge of taking on a senior executive role and making a signific

  • Answered by AI
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Selected Selected

I was interviewed in Dec 2023.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Can you tell me about yourself?
  • Ans. 

    Experienced HR professional with a strong background in talent acquisition, employee relations, and performance management.

    • Over 10 years of experience in HR roles

    • Successfully implemented recruitment strategies resulting in a 20% increase in qualified candidates

    • Led training and development programs that improved employee retention rates by 15%

  • Answered by AI
  • Q2. How many years of HR experience
  • Ans. 

    I have 10 years of experience in HR, with a focus on recruitment, employee relations, and training.

    • 10 years of experience in HR

    • Specialize in recruitment, employee relations, and training

    • Implemented successful employee retention strategies

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. How you aware of manufacturing industry?
  • Ans. 

    I am aware of the manufacturing industry through my education, work experience, and research.

    • I have a degree in engineering with a focus on manufacturing processes.

    • I have worked in manufacturing plants where I gained hands-on experience.

    • I stay updated on industry trends and advancements through research and networking.

    • I have completed relevant certifications and training programs in manufacturing safety and regulations

  • Answered by AI
  • Q2. Sections in factors act 1948
  • Ans. 

    The Factories Act, 1948 is a legislation in India that regulates the working conditions in factories.

    • The Factories Act, 1948 is divided into 13 sections.

    • These sections cover various aspects such as health, safety, welfare, working hours, and more.

    • Some important sections include Section 6 (Cleanliness), Section 11 (Fencing of machinery), and Section 41 (Penalties).

  • Answered by AI

Tell us how to improve this page.

Interview Questions from Similar Companies

Amalgam Steel Interview Questions
4.3
 • 10 Interviews
Amit Metaliks Interview Questions
3.1
 • 9 Interviews
Aamor Inox Interview Questions
3.7
 • 6 Interviews
View all

Vitson Steel Reviews and Ratings

based on 6 reviews

4.8/5

Rating in categories

3.8

Skill development

3.5

Work-Life balance

3.2

Salary & Benefits

3.3

Job Security

3.6

Company culture

2.6

Promotions/Appraisal

3.6

Work Satisfaction

Explore 6 Reviews and Ratings
Sales Support Executive
7 salaries
unlock blur

₹2.2 L/yr - ₹2.5 L/yr

Assistant Sales Manager
4 salaries
unlock blur

₹2.7 L/yr - ₹5.8 L/yr

Area Sales Manager
4 salaries
unlock blur

₹4 L/yr - ₹4.5 L/yr

Business Development Officer
4 salaries
unlock blur

₹2.2 L/yr - ₹4.2 L/yr

Explore more salaries
Compare Vitson Steel with

Bharat Wire Ropes

3.5
Compare

Amalgam Steel

4.3
Compare

Peekay Steel Castings

4.1
Compare

Pitti Laminations

3.9
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview