Upload Button Icon Add office photos

Filter interviews by

URC Construction Junior Manager Interview Questions and Answers

Updated 22 Jul 2022

URC Construction Junior Manager Interview Experiences

1 interview found

Round 1 - Technical 

(1 Question)

  • Q1. What kind of reinforcement using pre cost drains
  • Ans. 

    Pre cost drains are used for reinforcement in junior manager roles.

    • Pre cost drains are a type of reinforcement used in management.

    • They are used to reduce costs and improve efficiency.

    • Examples of pre cost drains include implementing cost-saving measures, streamlining processes, and optimizing resource allocation.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - You don't trust this advertisement . Will face direct interview

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Electrical based aptitude

Round 2 - Technical 

(5 Questions)

  • Q1. They will ask the question related to the your field
  • Q2. What is tranformer
  • Ans. 

    A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Consists of two coils of wire, known as primary and secondary windings

    • Primary winding receives electrical energy and induces a magnetic field

    • Magnetic field then transfers energy to secondary winding

    • Used to step up or step down voltage in electrical systems

    • Commonly used in power distribution systems

  • Answered by AI
  • Q3. What is induction motor
  • Ans. 

    An induction motor is a type of AC motor where power is supplied to the rotor by electromagnetic induction.

    • Consists of a stator and a rotor

    • Does not require any physical connection between the rotor and the stator

    • Commonly used in household appliances, industrial machinery, and electric vehicles

  • Answered by AI
  • Q4. Types of ac motors
  • Ans. 

    Types of AC motors include induction motors, synchronous motors, and single-phase motors.

    • Induction motors: most commonly used type, work on the principle of electromagnetic induction

    • Synchronous motors: maintain constant speed with the help of external DC supply

    • Single-phase motors: used in household appliances, have a single-phase power supply

  • Answered by AI
  • Q5. Types of induction motor
  • Ans. 

    Types of induction motors include single-phase, three-phase, squirrel cage, and wound rotor motors.

    • Single-phase induction motor: used in household appliances and small industrial applications

    • Three-phase induction motor: most commonly used in industrial settings for their efficiency and reliability

    • Squirrel cage induction motor: simple and rugged design, widely used in various applications

    • Wound rotor induction motor: all...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Feb 2024. There were 3 interview rounds.

Round 1 - Assignment 

Question and answer regarding basics of engineering

Round 2 - Technical 

(1 Question)

  • Q1. What are the steps in the construction of building?
  • Ans. 

    The steps in the construction of a building involve planning, designing, obtaining permits, site preparation, foundation construction, framing, roofing, finishing, and landscaping.

    • Planning: Determine the purpose, size, and layout of the building.

    • Designing: Create blueprints and architectural drawings.

    • Obtaining permits: Obtain necessary approvals from local authorities.

    • Site preparation: Clear the land and level the site...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Are you ready to relocate?
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Technical questions

Round 3 - Technical 

(2 Questions)

  • Q1. Technical questions
  • Q2. Felld related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - NA
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. 1) different between diafraam wall and retaining wall
  • Ans. 

    Diaphragm walls are used to create a barrier while retaining walls are used to hold back soil.

    • Diaphragm walls are underground walls that are used to create a barrier to prevent water from entering a construction site.

    • Retaining walls are used to hold back soil and prevent it from sliding or eroding.

    • Diaphragm walls are typically made of reinforced concrete and are used in deep excavations.

    • Retaining walls can be made of v...

  • Answered by AI
  • Q2. Which type of material used for shuttering
  • Ans. 

    Plywood, steel, aluminum, and plastic are commonly used materials for shuttering.

    • Plywood is the most commonly used material for shuttering due to its durability and affordability.

    • Steel is used for heavy-duty construction projects as it can withstand high pressure and weight.

    • Aluminum is lightweight and easy to handle, making it ideal for small-scale projects.

    • Plastic is a cost-effective option for simple construction pro...

  • Answered by AI
  • Q3. Calculate the bbs of 4 by 3m footing, d = 300mm , dia of steel = 12mm
  • Ans. 

    Calculate the bbs of a 4x3m footing with d=300mm and 12mm dia steel.

    • Calculate the total length of steel required

    • Determine the spacing between the bars

    • Prepare a detailed bar bending schedule

  • Answered by AI
  • Q4. Hot to calculate the quantity of concrete for trapezoidal footing
  • Ans. 

    To calculate the quantity of concrete for trapezoidal footing, we need to use the formula for volume of a trapezoidal prism.

    • Measure the length, width, and height of the trapezoidal footing

    • Calculate the area of the trapezoidal base using the formula (a+b)/2 * h

    • Calculate the volume of the trapezoidal prism using the formula area of base * height

    • Multiply the volume by the number of trapezoidal footings needed

    • Add an additi

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and tell about your experience then they ask questions from you work experience
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Assignment 

About any road ways and types of bridges and classification of is codes for building construction

Round 2 - Group Discussion 

About any road ways and classification of turnouts.

Interview Preparation Tips

Topics to prepare for AECOM Junior Engineer interview:
  • Salary
Interview preparation tips for other job seekers - Going to Job and there have safely. Be careful and keep safe.And be strong and be happy.

I applied via Walk-in and was interviewed before May 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Share your previous company details like qualification experience & sallery slip..
  • Q2. How much salary would you expect to take?
Round 3 - Technical 

(2 Questions)

  • Q1. Which thikness of shutting plywood used ?
  • Ans. 

    The thickness of shutting plywood used varies depending on the specific application and requirements.

    • The thickness of shutting plywood can range from 1/4 inch to 3/4 inch.

    • Thinner plywood, such as 1/4 inch, is commonly used for cabinet backs or drawer bottoms.

    • Thicker plywood, such as 3/4 inch, is often used for structural applications like subfloors or roofing.

    • The choice of plywood thickness depends on factors like load...

  • Answered by AI
  • Q2. Binding wire used in construction Which gauge used?
  • Ans. 

    Binding wire gauge used in construction depends on the type of construction work and the size of the reinforcement bars.

    • Binding wire is used to tie the reinforcement bars together in construction.

    • The gauge of the binding wire used depends on the size of the reinforcement bars and the type of construction work.

    • For example, for heavy-duty construction work, thicker gauge binding wire is used.

    • The most commonly used gauges...

  • Answered by AI
Round 4 - HR 

(1 Question)

  • Q1. Finally selection I should be selected on the salary I wanted

Interview Preparation Tips

Topics to prepare for Gannon Dunkerley & Co. Junior Engineer interview:
  • Visual Basic
Interview preparation tips for other job seekers - Basic of civil engineering and basic of site exacution.

Interview Questionnaire 

1 Question

  • Q1. Strength of Materials
  • Ans. 

    Strength of Materials is the study of how materials behave under different types of stress and strain.

    • It involves analyzing the properties of materials such as elasticity, plasticity, and toughness.

    • It is used to design structures that can withstand different types of loads and forces.

    • Examples include analyzing the strength of a bridge, the durability of a building, or the resistance of a material to wear and tear.

    • It is...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via campus placement at Dr Bhanuben Nanavati College of Architecture For Women, Pune and was interviewed before May 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Portfolio showcase
  • Q2. Autocad question : what are cad blocks
  • Ans. 

    CAD blocks are pre-drawn objects or symbols that can be easily inserted into a CAD drawing to save time and maintain consistency.

    • CAD blocks are reusable 2D or 3D objects that represent common items or elements in a design.

    • They can include furniture, fixtures, equipment, doors, windows, and more.

    • CAD blocks help streamline the design process by allowing architects to quickly add standard elements to their drawings.

    • They c...

  • Answered by AI
  • Q3. What is group in cad
  • Ans. 

    In CAD, a group is a collection of objects that are treated as a single entity for editing and manipulation.

    • Groups help organize and manage complex CAD drawings

    • Objects within a group can be moved, rotated, scaled, or edited together

    • Groups can be nested within other groups for further organization

    • Example: Grouping furniture objects in a floor plan for easy editing

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company good work culture
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Aptitude Test 

Engineering based Question paper

Round 3 - Technical 

(2 Questions)

  • Q1. Experienced based question
  • Q2. Why you left old job

Interview Preparation Tips

Interview preparation tips for other job seekers - go with strong Reference you will selected other wise they will enroll you on third party

URC Construction Interview FAQs

How many rounds are there in URC Construction Junior Manager interview?
URC Construction interview process usually has 1 rounds. The most common rounds in the URC Construction interview process are Technical.

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Projects Interview Questions
4.3
 • 397 Interviews
AECOM Interview Questions
4.3
 • 109 Interviews
Apco Infratech Interview Questions
3.8
 • 108 Interviews
GMR Group Interview Questions
4.1
 • 72 Interviews
View all
Assistant Engineer
201 salaries
unlock blur

₹1.8 L/yr - ₹5.5 L/yr

Senior Engineer
128 salaries
unlock blur

₹3 L/yr - ₹9 L/yr

Assistant Engineer - Civil
61 salaries
unlock blur

₹2.4 L/yr - ₹5.7 L/yr

Assistant Manager
48 salaries
unlock blur

₹4.6 L/yr - ₹9.9 L/yr

Civil Site Engineer
47 salaries
unlock blur

₹2.1 L/yr - ₹6.2 L/yr

Explore more salaries
Compare URC Construction with

Larsen & Toubro Limited

4.0
Compare

Tata Projects

4.3
Compare

Shapoorji Pallonji Group

4.2
Compare

GMR Group

4.1
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview