Technisys Interview Questions and Answers

Q1. Brief about your education, career, previous projects handled, and role & responsibility in past organisations?
Add your answer
Q2. Current roles & responsibilities and value addition done by you and your team?
Add your answer
Q3. Process flow for planning throughout project life-cycle?
Add your answer
Q4. Critical/concerning areas to be monitored?
Add your answer
Q5. Productivity and permissible material wastage, process to prepare material reconciliation?
Add your answer
Q6. Understanding about claim and type of claim raised/supported to raise in past experience?
Add your answer
Q7. Experience of technical aspects and planning assessment required at tendering stage, capabilities to prepare tender submittals and proving insights to management on same?
Add your answer
Q8. Necessity of providing PMO support to management?
Add your answer
Q9. Understanding about role & responsibility of regional planning manager?
Add your answer
Q10. MIS and type of reports prepared in past and their significance for Top managemennt?
Add your answer

Q1. What are the various code books used in civil engineering?
Add your answer
Q2. Rcc and steel basic formulas and considerations.
Add your answer

Q1. Highway related Questions
Add your answer
Q2. Highway related
Add your answer

Q1. Highway related Questions
Add your answer
Q2. Highway related Questions
Add your answer

Q1. Highway related Questions
Add your answer

Q1. DM PANTS mechanical
Add your answer
Q2. ITI fitter technician
Add your answer
Q3. All pumps dmPLANT operator
Add your answer

Q1. All pumps dm panlant
Add your answer
Q2. DM PANTS mechanical engineer working
Add your answer

Q1. What is main reason for belt joint failure?
Ans. 
The main reason for belt joint failure is usually due to improper installation or maintenance.
• Improper installation of the belt joint, such as incorrect alignment or tensioning

• Lack of proper maintenance, leading to wear and tear of the joint

• Use of low-quality materials for the joint

• Excessive load or stress on the belt joint

• Environmental factors like temperature or humidity affecting the joint
Answered by AI
Add your answer
Q2. What was the alignment maximum tolerance?
Ans. 
The alignment maximum tolerance refers to the maximum allowable deviation from the specified alignment.
• Alignment maximum tolerance is the maximum allowable deviation from the specified alignment.

• It is typically expressed in terms of a percentage or a specific measurement unit.

• For example, a machine part may have an alignment maximum tolerance of +/- 0.005 inches.

• Exceeding the alignment maximum tolerance can lead to per
Answered by AI
Add your answer
Q3. How to replace the bucket wheel reclaimer luffing cylinder?
Ans. 
To replace the bucket wheel reclaimer luffing cylinder, follow these steps.
• 1. Shut down the machine and ensure all power sources are disconnected.

• 2. Remove any surrounding components that may obstruct access to the luffing cylinder.

• 3. Use appropriate tools to disconnect the hydraulic hoses and fittings from the cylinder.

• 4. Support the weight of the cylinder as it is removed to prevent damage to surrounding components.

• 5...read more
Answered by AI
Add your answer
Q4. What is different between JSA and HIRA?
Ans. 
JSA stands for Job Safety Analysis, focusing on specific job tasks, while HIRA stands for Hazard Identification and Risk Assessment, focusing on overall workplace hazards.
• JSA is task-specific, focusing on individual job tasks and potential hazards

• HIRA is broader, looking at overall workplace hazards and assessing risks

• JSA involves breaking down a job into steps and identifying potential hazards for each step

• HIRA involv...read more
Answered by AI
Add your answer
Q5. How create a PR in SAP?
Ans. 
To create a PR in SAP, you can use transaction code ME51N or ME21N.
• Use transaction code ME51N to create a purchase requisition in SAP.

• Enter the necessary details such as material, quantity, delivery date, etc.

• Save the purchase requisition and it will be created in the system.

• Alternatively, you can also use transaction code ME21N to create a purchase order directly.
Answered by AI
Add your answer
Q6. What is procedure of pulley replacement?
Ans. 
The procedure of pulley replacement involves identifying the faulty pulley, removing the old pulley, installing the new pulley, and testing the system.
• Identify the faulty pulley by checking for any signs of wear or damage.

• Use appropriate tools to remove the old pulley, such as a pulley puller or wrench.

• Install the new pulley by aligning it properly and securing it in place.

• Test the system to ensure the new pulley is fu...read more
Answered by AI
Add your answer
Q7. Explain the procedure of PTW?
Ans. 
PTW stands for Permit to Work, a procedure used to ensure that work is carried out safely in potentially hazardous environments.
• PTW is a formal written system used to control certain types of work that are identified as potentially hazardous.

• Before starting work, a permit must be obtained from a designated authority.

• The permit outlines the work to be done, the hazards involved, and the necessary precautions to be taken...read more
Answered by AI
Add your answer

Topic : How AI influences engineering life

Q1. About steel structural construction
Add your answer
Q2. About risk and mitigation
Add your answer
Q3. Sub sea pipeline design
Add your answer

Q1. Tell me about your self
Ans. 
I am a recent graduate with a degree in Mechanical Engineering and a passion for problem-solving and innovation.
• Recent graduate with a degree in Mechanical Engineering

• Passionate about problem-solving and innovation

• Experience with CAD software such as SolidWorks

• Completed internships at engineering firms
Answered by AI
Add your answer
Q2. What do you expect from company
Add your answer
Q3. Where do you see yourself in 5 years
Add your answer

Simple aptitude questions

This is a shortlisting round, and many technically knowledgeable individuals did not qualify for this stage.

Q1. Which flow system is more effective: countercurrent flow or concurrent flow, and what are the reasons for this?
Ans. 
Countercurrent flow is more effective due to increased concentration gradient and better utilization of resources.
• Countercurrent flow allows for a greater concentration gradient between the two fluids, leading to more efficient mass transfer.

• Countercurrent flow also allows for better utilization of resources as the fluids are in contact for a longer period of time.

• Concurrent flow, on the other hand, results in a lower ...read more
Answered by AI
Add your answer
Q2. What is the procedure for designing a heat exchanger?
Ans. 
The procedure for designing a heat exchanger involves determining heat transfer requirements, selecting appropriate materials, designing the geometry, and analyzing performance.
• Determine the heat transfer requirements based on the fluids involved, flow rates, temperatures, and desired heat transfer rate.

• Select appropriate materials for the heat exchanger based on compatibility with the fluids, operating conditions, and...read more
Answered by AI
Add your answer

Q1. What is Sheetmetal?
Ans. 
Sheetmetal is a type of metal formed into thin and flat pieces, commonly used in manufacturing for creating various products.
• Sheetmetal is a thin and flat metal material that can be easily bent, cut, and formed into different shapes.

• It is commonly used in manufacturing processes for creating products such as car bodies, aircraft wings, HVAC ductwork, and household appliances.

• Sheetmetal fabrication involves processes li...read more
Answered by AI
Add your answer
Q2. Had discussion more than 10 minutes on package only out of 30 minutes.
Add your answer
Q3. What are the sheetmetal operation?
Ans. 
Sheetmetal operations are processes used to manipulate sheetmetal into desired shapes and forms.
• Bending: Folding the sheetmetal along a straight axis to create angles or curves.

• Cutting: Removing excess material from the sheetmetal to achieve the desired shape.

• Punching: Creating holes or other cutouts in the sheetmetal using a punch and die set.

• Forming: Shaping the sheetmetal into complex curves or contours using specia...read more
Answered by AI
Add your answer
Q4. Explain your one sheetmetal project in detail.
Add your answer
Q5. Question on IP rating.
Add your answer

If everyone is cheating you should also do it?

Q1. Everyhting about project..
Add your answer
Q2. Linear vs logistic regression
Ans. 
Linear regression is used for continuous variables, while logistic regression is used for binary outcomes.
• Linear regression is used to predict a continuous outcome based on one or more input variables.

• Logistic regression is used to predict the probability of a binary outcome based on one or more input variables.

• Linear regression assumes a linear relationship between the independent and dependent variables, while logist...read more
Answered by AI
Add your answer
Q3. Normalization in dbms
Ans. 
Normalization in DBMS is the process of organizing data in a database to reduce redundancy and improve data integrity.
• Normalization involves breaking down data into smaller, more manageable tables and establishing relationships between them.

• It helps in reducing data redundancy, minimizing data anomalies, and improving data consistency.

• There are different normal forms such as 1NF, 2NF, 3NF, BCNF, and 4NF, each with spec...read more
Answered by AI
Add your answer
Q4. List array difference etc
Ans. 
Array difference is finding the elements that are present in one array but not in another.
• Use set operations like difference to find elements in one array but not in another.

• Example: arr1 = ['a', 'b', 'c'], arr2 = ['b', 'c', 'd'], arr_diff = set(arr1) - set(arr2) = ['a']
Answered by AI
Add your answer