Filter interviews by
To draw a Bending Moment diagram, one needs to determine the reactions, calculate the shear force and integrate it to get the bending moment.
Determine the reactions at the supports
Calculate the shear force at each section of the beam
Integrate the shear force to get the bending moment
Plot the bending moment diagram
Provisions checked for designing a beam/column according to IS Codes
Cross-sectional dimensions
Minimum reinforcement
Maximum spacing of bars
Clear cover to reinforcement
Grade of concrete and steel
Load-bearing capacity
Bending moment and shear force
Deflection limits
IS 456 and IS 800 are codes and provisions related to concrete and steel design respectively.
IS 456 provides guidelines for the design and construction of reinforced concrete structures.
IS 800 provides guidelines for the design and construction of steel structures.
IS 456 covers topics such as materials, loads, design of members, and detailing.
IS 800 covers topics such as material properties, loads, design of members, a...
Permissible stresses in concrete and steel as per IS codes.
Permissible stress in concrete is 0.67 times the characteristic strength of concrete.
Permissible stress in steel is 0.2 times the yield strength of steel.
For example, if the characteristic strength of concrete is 30 N/mm², then the permissible stress in concrete would be 0.67 x 30 = 20 N/mm².
Similarly, if the yield strength of steel is 415 N/mm², then the permi...
Permissible values for deflection in a structure according to IS provisions.
The maximum permissible deflection for a structure is L/180 for live load and L/325 for total load.
L is the span of the beam or slab in meters.
The deflection limit is to ensure the safety and comfort of the occupants of the structure.
The deflection limit varies for different types of structures and materials used.
For example, the deflection lim...
Planning a house involves several steps from conceptualization to construction.
Understand the client's requirements and budget
Create a design plan and get it approved by the client
Obtain necessary permits and approvals from local authorities
Prepare a detailed construction plan and schedule
Select and hire contractors and subcontractors
Supervise the construction process and ensure quality control
Ensure compliance with bu...
BTP project is a railway project aimed at improving connectivity and reducing travel time.
BTP stands for Bangalore-Mysore Infrastructure Corridor
It is a 111 km long 6-lane expressway connecting Bangalore and Mysore
The project also includes the construction of a high-speed rail link between the two cities
The main objective is to reduce travel time and improve connectivity between the two cities
The project is expected to
Channel flow is open flow with free surface while pipe flow is confined flow with closed surface.
Channel flow occurs in open channels like rivers, canals, etc. while pipe flow occurs in closed conduits like pipes, tubes, etc.
In channel flow, the fluid is exposed to the atmosphere and the surface is not fixed while in pipe flow, the fluid is confined and the surface is fixed.
Channel flow is affected by gravity and surfa...
Gutter is an example of open channel flow.
Open channel flow is a flow of fluid in a channel with a free surface.
Gutter is an open channel that carries rainwater from roofs to the ground.
Closed pipe flow is a flow of fluid in a pipe with a closed surface.
Examples of closed pipe flow include water supply pipes and sewage pipes.
A distribution system in a town can be explained through a drawing.
The distribution system starts at the water treatment plant
Water is transported through pipes to storage tanks
From storage tanks, water is distributed to homes and businesses
The distribution system also includes valves, pumps, and meters
The system may also include fire hydrants and water mains
The drawing should show the flow of water and the location of
I am a detail-oriented and motivated individual with a passion for engineering and problem-solving.
I have a degree in Mechanical Engineering from XYZ University.
I have completed internships at ABC Company and DEF Inc. where I gained experience in CAD software and project management.
I am proficient in programming languages such as Python and C++.
I enjoy working in a team and collaborating with others to find innovative
I prefer TCE over other firms because of their strong reputation and commitment to innovation.
TCE has a proven track record of delivering high-quality engineering solutions.
They prioritize innovation and are always looking for new and better ways to solve problems.
TCE values collaboration and teamwork, which creates a positive and productive work environment.
Their focus on sustainability aligns with my personal values ...
I was actively involved in the Counseling service and E-Club during my college years.
In the Counseling service, I provided emotional support and guidance to students who were struggling with personal or academic issues.
As a member of the E-Club, I organized and participated in various events related to technology and entrepreneurship.
I also helped to promote the club through social media and other channels.
Through thes...
My family background is diverse and has a mix of cultures and professions.
My father is a doctor and my mother is a teacher.
I have two siblings, one is an artist and the other is a software engineer.
We come from a multicultural background with roots in India and the United States.
My family values education and hard work.
We enjoy spending time together and exploring new places.
TCE stands for Trichloroethylene, a colorless liquid used as a solvent in various industries.
TCE is commonly used in dry cleaning, metal degreasing, and as a refrigerant.
It is a potent carcinogen and can cause serious health issues if not handled properly.
TCE exposure can lead to liver and kidney damage, respiratory issues, and neurological problems.
The EPA has set a maximum contaminant level of 5 parts per billion for...
I applied via Campus Placement
It was a technicaL + aptitude test with 60 minutes duration.
I was interviewed in Dec 2024.
It is easy for both aptitude and core subjects.
I applied via Approached by Company and was interviewed in Jul 2024. There was 1 interview round.
To increase terminal residual pressure in a pipe, you can adjust the pump speed, increase the pipe diameter, or reduce the pipe length.
Adjust the pump speed to increase the pressure in the pipe.
Increase the pipe diameter to reduce friction losses and increase pressure.
Reduce the pipe length to minimize pressure drop along the pipe.
Check for any leaks or blockages in the pipe that may be causing pressure loss.
Concrete grades are classifications that indicate the strength of the concrete mix used in construction projects.
Concrete grades are classified based on their compressive strength, measured in megapascals (MPa).
Common concrete grades include C10, C15, C20, C25, C30, C35, C40, C45, C50, and C60.
Higher grade concrete mixes are used for projects that require stronger and more durable structures.
The specific grade of concr...
I am experienced in designing water supply networks using software such as EPANET, WaterCAD, and Bentley WaterGEMS.
EPANET
WaterCAD
Bentley WaterGEMS
TCE interview questions for popular designations
I was interviewed in Jul 2024.
Safety management involves implementing policies, procedures, and practices to ensure a safe work environment.
Safety management includes risk assessments to identify hazards and implement controls.
Regular safety training and communication are essential for promoting a safety culture.
Incident reporting and investigation help in identifying root causes and implementing corrective actions.
Safety audits and inspections are...
Leading and lagging are terms used in project management to describe the relationship between two activities.
Leading refers to an activity that must be completed before another activity can start.
Lagging refers to an activity that is delayed or starts after another activity has already begun.
Leading activities help in speeding up the project schedule, while lagging activities help in delaying the project schedule.
For e...
Get interview-ready with Top TCE Interview Questions
I applied via Campus Placement and was interviewed in Dec 2024. There were 3 interview rounds.
Quantitative reasoning andtranducer English.
I applied via Campus Placement and was interviewed in Jul 2024. There was 1 interview round.
Various code books used in civil engineering include ACI 318, AISC Steel Construction Manual, and ASCE 7.
ACI 318 - American Concrete Institute's Building Code Requirements for Structural Concrete
AISC Steel Construction Manual - American Institute of Steel Construction's manual for designing steel structures
ASCE 7 - American Society of Civil Engineers' Minimum Design Loads for Buildings and Other Structures
I applied via Campus Placement and was interviewed in Jul 2024. There were 3 interview rounds.
Basic technical knowledge and aptitude
My favourite subject is Mechanical Engineering because I enjoy learning about the principles of mechanics and how machines work.
I enjoy studying topics like thermodynamics, fluid mechanics, and materials science.
I like working on hands-on projects like designing and building machines or structures.
I find the problem-solving aspect of Mechanical Engineering to be challenging and rewarding.
TCE focuses on core engineering principles while IT focuses on information technology.
TCE involves designing, building, and maintaining physical structures and systems.
IT involves managing and utilizing technology for information processing and communication.
TCE requires knowledge of mechanics, materials, and construction techniques.
IT requires knowledge of programming, networking, and software development.
Examples: Ci...
I believe gaining practical experience in a professional setting will enhance my skills more effectively than further education.
I value hands-on experience and believe it is more beneficial for my career growth
I want to apply the knowledge I have gained in a real-world setting
I prefer to learn through practical application rather than theoretical study
Company is a leading software development firm specializing in creating innovative solutions for various industries.
Specializes in creating innovative software solutions
Works with clients from various industries
Known for high-quality and reliable products
Top trending discussions
The duration of TCE interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 200 interviews
Interview experience
8-14 Yrs
Not Disclosed
Assistant Manager
478
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
352
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
321
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Manager
285
salaries
| ₹0 L/yr - ₹0 L/yr |
Consultant
254
salaries
| ₹0 L/yr - ₹0 L/yr |
Infosys
Wipro
HCLTech
Tech Mahindra