Upload Button Icon Add office photos

TCE

Compare button icon Compare button icon Compare

Filter interviews by

TCE Interview Questions, Process, and Tips

Updated 3 Mar 2025

Top TCE Interview Questions and Answers

View all 211 questions

TCE Interview Experiences

Popular Designations

248 interviews found

Interview Questionnaire 

9 Questions

  • Q1. What is rolling margin
  • Ans. 

    Rolling margin is a financial term that refers to the difference between the revenue generated and the variable costs incurred over a specific period of time.

    • Rolling margin is used to measure the profitability of a business or project.

    • It helps in assessing the efficiency of operations and identifying areas for cost reduction.

    • The formula for calculating rolling margin is: (Revenue - Variable Costs) / Revenue * 100.

    • For e...

  • Answered by AI
  • Q2. What will you do if the site qty differ from Drawing qty
  • Ans. 

    If the site quantity differs from the drawing quantity, I will take the following steps to address the issue.

    • I will review the drawings and specifications to ensure accuracy.

    • I will communicate with the project team, including the architect and engineer, to clarify any discrepancies.

    • I will conduct a site visit to physically verify the quantities and compare them with the drawings.

    • If there are significant differences, I ...

  • Answered by AI
  • Q3. Tell me about ur self
  • Q4. What is reconciliation of steel
  • Ans. 

    Reconciliation of steel involves comparing the actual quantity of steel used in a construction project with the estimated quantity.

    • Reconciliation of steel is a process used in construction projects to ensure that the actual quantity of steel used matches the estimated quantity.

    • It involves comparing the quantity of steel recorded in the project's documentation, such as drawings and specifications, with the quantity of s...

  • Answered by AI
  • Q5. What is the procedure for BBS
  • Ans. 

    BBS stands for Bar Bending Schedule, which is a detailed list of reinforcement bars in a concrete element.

    • BBS is prepared based on the structural drawings and specifications.

    • It includes the diameter, length, shape, and number of reinforcement bars required for the element.

    • BBS helps in estimating the quantity of steel required and also ensures the correct placement of reinforcement bars.

    • It is an essential document for t...

  • Answered by AI
  • Q6. How you do the rate analysis
  • Ans. 

    Rate analysis is done by breaking down the cost of each item in a construction project to determine the overall cost.

    • Rate analysis involves breaking down the cost of each item in a construction project.

    • The cost of materials, labor, and equipment is analyzed to determine the overall cost.

    • Quantities of each item are measured and multiplied by their respective rates to calculate the cost.

    • Rate analysis helps in estimating ...

  • Answered by AI
  • Q7. What is margin for OH & Profits in Rate analysis
  • Ans. 

    Margin for OH & Profits in rate analysis is the additional amount added to cover overhead costs and generate profit.

    • Margin for OH & Profits is added to the direct cost of a project to cover indirect costs and generate profit.

    • It is usually expressed as a percentage of the direct cost.

    • The margin for OH & Profits varies depending on the nature of the project and market conditions.

    • For example, if the direct cost of a proje...

  • Answered by AI
  • Q8. Wastage % for Reinforcement Steel
  • Ans. 

    The wastage percentage for reinforcement steel varies depending on factors such as project complexity and workmanship.

    • Wastage percentage for reinforcement steel is typically estimated between 2-5%.

    • Factors such as project complexity, workmanship, and site conditions can affect the wastage percentage.

    • Proper planning, accurate cutting, and careful handling can help minimize wastage.

    • Examples of wastage include incorrect cu...

  • Answered by AI
  • Q9. Code for Structural steel and reinforced steel
  • Ans. 

    The code for structural steel is typically governed by the American Institute of Steel Construction (AISC) while reinforced steel is governed by the American Concrete Institute (ACI).

    • Structural steel is commonly used in the construction of buildings, bridges, and other structures.

    • The AISC provides standards and guidelines for the design, fabrication, and erection of structural steel.

    • Reinforced steel, also known as reba...

  • Answered by AI

Top TCE Quantity Surveyor Interview Questions and Answers

Q1. What will you do if the site qty differ from Drawing qty
View answer (8)

Quantity Surveyor Interview Questions asked at other Companies

Q1. What will you do if the site qty differ from Drawing qty
View answer (8)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Aptitude Test 

It was a technicaL + aptitude test with 60 minutes duration.

Round 2 - Technical 

(2 Questions)

  • Q1. Basic questions regarding the projects that i have done.
  • Q2. They asked me about my favourite subjects and then they asked some basic questions regarding those subjects.
Round 3 - HR 

(1 Question)

  • Q1. HR round in TCE is not an interview round rather it is a video assessment wherein we were given with two HR questions and we have to record a video answering the questions. maximum duration of the video sh...

Interview Preparation Tips

Interview preparation tips for other job seekers - Revise the core subjects of your field as it will help you during your technical test or interview as well. Feel confident while answering the question during Technical/HR interview.

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)
TCE Interview Questions and Answers for Freshers
illustration image
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
No response

I was interviewed in Dec 2024.

Round 1 - Aptitude Test 

It is easy for both aptitude and core subjects.

Round 2 - Technical 

(1 Question)

  • Q1. Most of the questions were from structural design. They also asked on geotechnical and transportation and i guess this is because i have done my internship in highway and currently doing project in geotech
Round 3 - HR 

(1 Question)

  • Q1. This was a video round with 2 questions. About yourself? How well do you fit in the company? Skills that you posses?

Interview Preparation Tips

Interview preparation tips for other job seekers - This is a pool drive so the results are announced way too late

Top TCE Engineer Trainee Interview Questions and Answers

Q1. In STAAD what you have done? How you will do the reinforcement calculations?
View answer (2)

Engineer Trainee Interview Questions asked at other Companies

Q1. If 10 people had a meeting and they shake hands only once with each of the others, then how many handshakes will be there in total ?
View answer (8)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. If you need to increase terminal residual pressure in pipe, what would you do?
  • Ans. 

    To increase terminal residual pressure in a pipe, you can adjust the pump speed, increase the pipe diameter, or reduce the pipe length.

    • Adjust the pump speed to increase the pressure in the pipe.

    • Increase the pipe diameter to reduce friction losses and increase pressure.

    • Reduce the pipe length to minimize pressure drop along the pipe.

    • Check for any leaks or blockages in the pipe that may be causing pressure loss.

  • Answered by AI
  • Q2. What are the different Concrete grades?
  • Ans. 

    Concrete grades are classifications that indicate the strength of the concrete mix used in construction projects.

    • Concrete grades are classified based on their compressive strength, measured in megapascals (MPa).

    • Common concrete grades include C10, C15, C20, C25, C30, C35, C40, C45, C50, and C60.

    • Higher grade concrete mixes are used for projects that require stronger and more durable structures.

    • The specific grade of concr...

  • Answered by AI
  • Q3. What are the other software you are experienced in designing water supply networks
  • Ans. 

    I am experienced in designing water supply networks using software such as EPANET, WaterCAD, and Bentley WaterGEMS.

    • EPANET

    • WaterCAD

    • Bentley WaterGEMS

  • Answered by AI

Interview Preparation Tips

Topics to prepare for TCE Water Supply Engineer interview:
  • Water supply analysis
  • Basic civil engineering
  • Software

Water Supply Engineer Interview Questions asked at other Companies

Q1. If you need to increase terminal residual pressure in pipe, what would you do?
View answer (1)

TCE interview questions for popular designations

 Consultant

 (15)

 Assistant Manager

 (13)

 Engineer Trainee

 (12)

 Civil Site Engineer

 (8)

 Site Engineer

 (6)

 Senior Engineer

 (5)

 Graduate Trainee

 (5)

 Manager

 (4)

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed in Jul 2024.

Round 1 - One-on-one 

(4 Questions)

  • Q1. What about safety management
  • Ans. 

    Safety management involves implementing policies, procedures, and practices to ensure a safe work environment.

    • Safety management includes risk assessments to identify hazards and implement controls.

    • Regular safety training and communication are essential for promoting a safety culture.

    • Incident reporting and investigation help in identifying root causes and implementing corrective actions.

    • Safety audits and inspections are...

  • Answered by AI
  • Q2. What is leading and lagging.
  • Ans. 

    Leading and lagging are terms used in project management to describe the relationship between two activities.

    • Leading refers to an activity that must be completed before another activity can start.

    • Lagging refers to an activity that is delayed or starts after another activity has already begun.

    • Leading activities help in speeding up the project schedule, while lagging activities help in delaying the project schedule.

    • For e...

  • Answered by AI
  • Q3. Legal documents are required for lifting equipment.
  • Q4. OSHA Compliances
Round 2 - HR 

(2 Questions)

  • Q1. Disscus about salary .
  • Q2. Disscus about joining date.

HSE Consultant Interview Questions asked at other Companies

Q1. How will you check the effectivness of SMS in the company? What are the main points to be checked during the audit? How the interview of eye witness to be taken during accident investigation?
View answer (1)

Get interview-ready with Top TCE Interview Questions

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
No response

I applied via Campus Placement and was interviewed in Dec 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Quantitative reasoning andtranducer English.

Round 2 - Technical 

(1 Question)

  • Q1. What is a transducer
Round 3 - HR 

(1 Question)

  • Q1. Why do you want to join TCE?

Graduate Trainee Interview Questions asked at other Companies

Q1. Given an array, how do you get the count of pairs that sum to even
View answer (8)

Jobs at TCE

View all
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What are the various code books used in civil engineering?
  • Ans. 

    Various code books used in civil engineering include ACI 318, AISC Steel Construction Manual, and ASCE 7.

    • ACI 318 - American Concrete Institute's Building Code Requirements for Structural Concrete

    • AISC Steel Construction Manual - American Institute of Steel Construction's manual for designing steel structures

    • ASCE 7 - American Society of Civil Engineers' Minimum Design Loads for Buildings and Other Structures

  • Answered by AI
  • Q2. Rcc and steel basic formulas and considerations.

Interview Preparation Tips

Interview preparation tips for other job seekers - Fill ur resume with good projects.
Maintain gpa above 8.0*
Be good at communication.
Chill out don't stress while answering. U'll get ur shot.

Top TCE Engineer Trainee Interview Questions and Answers

Q1. In STAAD what you have done? How you will do the reinforcement calculations?
View answer (2)

Engineer Trainee Interview Questions asked at other Companies

Q1. If 10 people had a meeting and they shake hands only once with each of the others, then how many handshakes will be there in total ?
View answer (8)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(5 Questions)

  • Q1. Sure it possibility
  • Q2. Ok take all responsibility..
  • Q3. Document controller
  • Q4. All deciplen document
  • Q5. Correspondance related job..

Document Controller Interview Questions asked at other Companies

Q1. How many Engineering Documents will be process if you handle EPC project?
View answer (4)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jul 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Basic technical knowledge and aptitude

Round 2 - Technical 

(2 Questions)

  • Q1. Favourite subject
  • Ans. 

    My favourite subject is Mechanical Engineering because I enjoy learning about the principles of mechanics and how machines work.

    • I enjoy studying topics like thermodynamics, fluid mechanics, and materials science.

    • I like working on hands-on projects like designing and building machines or structures.

    • I find the problem-solving aspect of Mechanical Engineering to be challenging and rewarding.

  • Answered by AI
  • Q2. Basic questions on that topic
Round 3 - HR 

(2 Questions)

  • Q1. Why TCE not IT ?
  • Ans. 

    TCE focuses on core engineering principles while IT focuses on information technology.

    • TCE involves designing, building, and maintaining physical structures and systems.

    • IT involves managing and utilizing technology for information processing and communication.

    • TCE requires knowledge of mechanics, materials, and construction techniques.

    • IT requires knowledge of programming, networking, and software development.

    • Examples: Ci...

  • Answered by AI
  • Q2. Why not further education
  • Ans. 

    I believe gaining practical experience in a professional setting will enhance my skills more effectively than further education.

    • I value hands-on experience and believe it is more beneficial for my career growth

    • I want to apply the knowledge I have gained in a real-world setting

    • I prefer to learn through practical application rather than theoretical study

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Best of luck

Top TCE Engineer Trainee Interview Questions and Answers

Q1. In STAAD what you have done? How you will do the reinforcement calculations?
View answer (2)

Engineer Trainee Interview Questions asked at other Companies

Q1. If 10 people had a meeting and they shake hands only once with each of the others, then how many handshakes will be there in total ?
View answer (8)
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
-
Result
No response
Round 1 - Technical 

(2 Questions)

  • Q1. Just basics in java
  • Q2. Advance oops concepts
Round 2 - HR 

(2 Questions)

  • Q1. What do u know about our company
  • Ans. 

    Company is a leading software development firm specializing in creating innovative solutions for various industries.

    • Specializes in creating innovative software solutions

    • Works with clients from various industries

    • Known for high-quality and reliable products

  • Answered by AI
  • Q2. Strengths and waekness

Software Developer Interview Questions asked at other Companies

Q1. Maximum Subarray Sum Problem Statement Given an array of integers, determine the maximum possible sum of any contiguous subarray within the array. Example: Input: array = [34, -50, 42, 14, -5, 86] Output: 137 Explanation: The maximum sum is... read more
View answer (42)

Interview Questions & Answers

user image Anonymous

posted on 19 Jul 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Past experience
  • Q2. How can you contribute to company
Round 2 - One-on-one 

(2 Questions)

  • Q1. Current salary getting in hand
  • Q2. Expected salary

Interview Preparation Tips

Interview preparation tips for other job seekers - Properly go through your past experience
Contribute & help others!
anonymous
You can choose to be anonymous

TCE Interview FAQs

How many rounds are there in TCE interview?
TCE interview process usually has 2-3 rounds. The most common rounds in the TCE interview process are Technical, HR and Resume Shortlist.
How to prepare for TCE interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at TCE. The most common topics and skills that interviewers at TCE expect are Consulting, Metallurgy, Hydrogen, Thermal Plant and Mining Engineering.
What are the top questions asked in TCE interview?

Some of the top questions asked at the TCE interview -

  1. If your concrete is M50 and 28 days cube test result is below 100% so that time...read more
  2. What will you do if the site qty differ from Drawing ...read more
  3. If the cubes are failed then what will you d...read more
How long is the TCE interview process?

The duration of TCE interview process can vary, but typically it takes about less than 2 weeks to complete.

Recently Viewed

JOBS

Browse jobs

Discover jobs you love

COMPANY BENEFITS

KNR Constructions

20 benefits

COMPANY BENEFITS

IRB Infrastructure

60 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

JOBS

J P Extrusiontech

No Jobs

SALARIES

Afcons Infrastructure

SALARIES

Afcons Infrastructure

SALARIES

KEC International

No Salaries

SALARIES

KEC International

Tell us how to improve this page.

TCE Interview Process

based on 200 interviews

Interview experience

4.2
  
Good
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.4k Interviews
Infosys Interview Questions
3.6
 • 7.5k Interviews
Wipro Interview Questions
3.7
 • 5.6k Interviews
Tech Mahindra Interview Questions
3.5
 • 3.8k Interviews
HCLTech Interview Questions
3.5
 • 3.8k Interviews
LTIMindtree Interview Questions
3.8
 • 2.9k Interviews
Mphasis Interview Questions
3.4
 • 790 Interviews
Tata Projects Interview Questions
4.2
 • 425 Interviews
View all

TCE Reviews and Ratings

based on 1.7k reviews

3.8/5

Rating in categories

3.6

Skill development

3.8

Work-life balance

3.3

Salary

3.8

Job security

3.6

Company culture

3.0

Promotions

3.5

Work satisfaction

Explore 1.7k Reviews and Ratings
Assistant Manager
478 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
352 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
321 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
285 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Consultant
254 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare TCE with

Infosys

3.6
Compare

Wipro

3.7
Compare

HCLTech

3.5
Compare

Tech Mahindra

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview