Upload Button Icon Add office photos

TCE

Compare button icon Compare button icon Compare

Filter interviews by

TCE Interview Questions, Process, and Tips

Updated 3 Mar 2025

Top TCE Interview Questions and Answers

View all 211 questions

TCE Interview Experiences

Popular Designations

248 interviews found

Interview Questionnaire 

16 Questions

  • Q1. Draw a Bending Moment diagram given a particular loading ?
  • Ans. 

    To draw a Bending Moment diagram, one needs to determine the reactions, calculate the shear force and integrate it to get the bending moment.

    • Determine the reactions at the supports

    • Calculate the shear force at each section of the beam

    • Integrate the shear force to get the bending moment

    • Plot the bending moment diagram

  • Answered by AI
  • Q2. What are the provisions you check for, designing a beam/column according to the IS Codes?
  • Ans. 

    Provisions checked for designing a beam/column according to IS Codes

    • Cross-sectional dimensions

    • Minimum reinforcement

    • Maximum spacing of bars

    • Clear cover to reinforcement

    • Grade of concrete and steel

    • Load-bearing capacity

    • Bending moment and shear force

    • Deflection limits

  • Answered by AI
  • Q3. Codes and provisions in IS 456 and IS 800 ?
  • Ans. 

    IS 456 and IS 800 are codes and provisions related to concrete and steel design respectively.

    • IS 456 provides guidelines for the design and construction of reinforced concrete structures.

    • IS 800 provides guidelines for the design and construction of steel structures.

    • IS 456 covers topics such as materials, loads, design of members, and detailing.

    • IS 800 covers topics such as material properties, loads, design of members, a...

  • Answered by AI
  • Q4. What are the permissible stresses in concrete and steel as according to the IS codes ?
  • Ans. 

    Permissible stresses in concrete and steel as per IS codes.

    • Permissible stress in concrete is 0.67 times the characteristic strength of concrete.

    • Permissible stress in steel is 0.2 times the yield strength of steel.

    • For example, if the characteristic strength of concrete is 30 N/mm², then the permissible stress in concrete would be 0.67 x 30 = 20 N/mm².

    • Similarly, if the yield strength of steel is 415 N/mm², then the permi...

  • Answered by AI
  • Q5. What is the permissible values for deflection in a structure according to the IS provisions ?
  • Ans. 

    Permissible values for deflection in a structure according to IS provisions.

    • The maximum permissible deflection for a structure is L/180 for live load and L/325 for total load.

    • L is the span of the beam or slab in meters.

    • The deflection limit is to ensure the safety and comfort of the occupants of the structure.

    • The deflection limit varies for different types of structures and materials used.

    • For example, the deflection lim...

  • Answered by AI
  • Q6. How do you go about in planning a house from the start till the end?
  • Ans. 

    Planning a house involves several steps from conceptualization to construction.

    • Understand the client's requirements and budget

    • Create a design plan and get it approved by the client

    • Obtain necessary permits and approvals from local authorities

    • Prepare a detailed construction plan and schedule

    • Select and hire contractors and subcontractors

    • Supervise the construction process and ensure quality control

    • Ensure compliance with bu...

  • Answered by AI
  • Q7. Explain the BTP project and the main points.
  • Ans. 

    BTP project is a railway project aimed at improving connectivity and reducing travel time.

    • BTP stands for Bangalore-Mysore Infrastructure Corridor

    • It is a 111 km long 6-lane expressway connecting Bangalore and Mysore

    • The project also includes the construction of a high-speed rail link between the two cities

    • The main objective is to reduce travel time and improve connectivity between the two cities

    • The project is expected to

  • Answered by AI
  • Q8. Difference between channel flow and pipe flow
  • Ans. 

    Channel flow is open flow with free surface while pipe flow is confined flow with closed surface.

    • Channel flow occurs in open channels like rivers, canals, etc. while pipe flow occurs in closed conduits like pipes, tubes, etc.

    • In channel flow, the fluid is exposed to the atmosphere and the surface is not fixed while in pipe flow, the fluid is confined and the surface is fixed.

    • Channel flow is affected by gravity and surfa...

  • Answered by AI
  • Q9. Is gutter an example of the open channel flow or a closed pipe flow?
  • Ans. 

    Gutter is an example of open channel flow.

    • Open channel flow is a flow of fluid in a channel with a free surface.

    • Gutter is an open channel that carries rainwater from roofs to the ground.

    • Closed pipe flow is a flow of fluid in a pipe with a closed surface.

    • Examples of closed pipe flow include water supply pipes and sewage pipes.

  • Answered by AI
  • Q10. Explain the distribution system in a town by drawing?
  • Ans. 

    A distribution system in a town can be explained through a drawing.

    • The distribution system starts at the water treatment plant

    • Water is transported through pipes to storage tanks

    • From storage tanks, water is distributed to homes and businesses

    • The distribution system also includes valves, pumps, and meters

    • The system may also include fire hydrants and water mains

    • The drawing should show the flow of water and the location of

  • Answered by AI
  • Q11. Tell us something about yourself.
  • Ans. 

    I am a detail-oriented and motivated individual with a passion for engineering and problem-solving.

    • I have a degree in Mechanical Engineering from XYZ University.

    • I have completed internships at ABC Company and DEF Inc. where I gained experience in CAD software and project management.

    • I am proficient in programming languages such as Python and C++.

    • I enjoy working in a team and collaborating with others to find innovative

  • Answered by AI
  • Q12. Why do you prefer TCE over other firms?
  • Ans. 

    I prefer TCE over other firms because of their strong reputation and commitment to innovation.

    • TCE has a proven track record of delivering high-quality engineering solutions.

    • They prioritize innovation and are always looking for new and better ways to solve problems.

    • TCE values collaboration and teamwork, which creates a positive and productive work environment.

    • Their focus on sustainability aligns with my personal values ...

  • Answered by AI
  • Q13. Tell us about your activities in the Counseling service and E-Club ?
  • Ans. 

    I was actively involved in the Counseling service and E-Club during my college years.

    • In the Counseling service, I provided emotional support and guidance to students who were struggling with personal or academic issues.

    • As a member of the E-Club, I organized and participated in various events related to technology and entrepreneurship.

    • I also helped to promote the club through social media and other channels.

    • Through thes...

  • Answered by AI
  • Q14. What is your family background?
  • Ans. 

    My family background is diverse and has a mix of cultures and professions.

    • My father is a doctor and my mother is a teacher.

    • I have two siblings, one is an artist and the other is a software engineer.

    • We come from a multicultural background with roots in India and the United States.

    • My family values education and hard work.

    • We enjoy spending time together and exploring new places.

  • Answered by AI
  • Q15. What do you know about TCE?
  • Ans. 

    TCE stands for Trichloroethylene, a colorless liquid used as a solvent in various industries.

    • TCE is commonly used in dry cleaning, metal degreasing, and as a refrigerant.

    • It is a potent carcinogen and can cause serious health issues if not handled properly.

    • TCE exposure can lead to liver and kidney damage, respiratory issues, and neurological problems.

    • The EPA has set a maximum contaminant level of 5 parts per billion for...

  • Answered by AI
  • Q16. Questions based on the resume

Interview Preparation Tips

Round: Test
Experience: All questions mainly on structural engineering. Questions were simple objective type and the level of the questions was simple - More based on the knowledge part than the problem solving part.
Technical Test had good conceptual questions and was basically on Structural Engineering-Steel and Concrete Design, Stresses and Materials.
Tips: Aptitude Test was simply based on the CAT pattern and was relatively easy. Make sure you are prepared.
Duration: 45 minutes
Total Questions: 20+15

Round: Other Interview
Experience: Many questions were asked on the projects I was involved.

General Tips: The test was more based on knowledge rather than problem solving. Go through Hibbeler once before going for the test.
Skills: Structural Engineering, Strength of Materials, Concrete Design
College Name: IIT- Kanpur

Top TCE Assistant Engineer Interview Questions and Answers

Q1. What are the provisions you check for, designing a beam/column according to the IS Codes?
View answer (1)

Assistant Engineer Interview Questions asked at other Companies

Q1. Why do we take only 1 set of cube sample at a casting of concrete of 5 or less than 5 Meter cube.
View answer (9)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Aptitude Test 

It was a technicaL + aptitude test with 60 minutes duration.

Round 2 - Technical 

(2 Questions)

  • Q1. Basic questions regarding the projects that i have done.
  • Q2. They asked me about my favourite subjects and then they asked some basic questions regarding those subjects.
Round 3 - HR 

(1 Question)

  • Q1. HR round in TCE is not an interview round rather it is a video assessment wherein we were given with two HR questions and we have to record a video answering the questions. maximum duration of the video sh...

Interview Preparation Tips

Interview preparation tips for other job seekers - Revise the core subjects of your field as it will help you during your technical test or interview as well. Feel confident while answering the question during Technical/HR interview.

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
No response

I was interviewed in Dec 2024.

Round 1 - Aptitude Test 

It is easy for both aptitude and core subjects.

Round 2 - Technical 

(1 Question)

  • Q1. Most of the questions were from structural design. They also asked on geotechnical and transportation and i guess this is because i have done my internship in highway and currently doing project in geotech
Round 3 - HR 

(1 Question)

  • Q1. This was a video round with 2 questions. About yourself? How well do you fit in the company? Skills that you posses?

Interview Preparation Tips

Interview preparation tips for other job seekers - This is a pool drive so the results are announced way too late

Top TCE Engineer Trainee Interview Questions and Answers

Q1. In STAAD what you have done? How you will do the reinforcement calculations?
View answer (2)

Engineer Trainee Interview Questions asked at other Companies

Q1. If 10 people had a meeting and they shake hands only once with each of the others, then how many handshakes will be there in total ?
View answer (8)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. If you need to increase terminal residual pressure in pipe, what would you do?
  • Ans. 

    To increase terminal residual pressure in a pipe, you can adjust the pump speed, increase the pipe diameter, or reduce the pipe length.

    • Adjust the pump speed to increase the pressure in the pipe.

    • Increase the pipe diameter to reduce friction losses and increase pressure.

    • Reduce the pipe length to minimize pressure drop along the pipe.

    • Check for any leaks or blockages in the pipe that may be causing pressure loss.

  • Answered by AI
  • Q2. What are the different Concrete grades?
  • Ans. 

    Concrete grades are classifications that indicate the strength of the concrete mix used in construction projects.

    • Concrete grades are classified based on their compressive strength, measured in megapascals (MPa).

    • Common concrete grades include C10, C15, C20, C25, C30, C35, C40, C45, C50, and C60.

    • Higher grade concrete mixes are used for projects that require stronger and more durable structures.

    • The specific grade of concr...

  • Answered by AI
  • Q3. What are the other software you are experienced in designing water supply networks
  • Ans. 

    I am experienced in designing water supply networks using software such as EPANET, WaterCAD, and Bentley WaterGEMS.

    • EPANET

    • WaterCAD

    • Bentley WaterGEMS

  • Answered by AI

Interview Preparation Tips

Topics to prepare for TCE Water Supply Engineer interview:
  • Water supply analysis
  • Basic civil engineering
  • Software

Water Supply Engineer Interview Questions asked at other Companies

Q1. If you need to increase terminal residual pressure in pipe, what would you do?
View answer (1)

TCE interview questions for popular designations

 Consultant

 (15)

 Assistant Manager

 (13)

 Engineer Trainee

 (12)

 Civil Site Engineer

 (8)

 Site Engineer

 (6)

 Senior Engineer

 (5)

 Graduate Trainee

 (5)

 Manager

 (4)

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed in Jul 2024.

Round 1 - One-on-one 

(4 Questions)

  • Q1. What about safety management
  • Ans. 

    Safety management involves implementing policies, procedures, and practices to ensure a safe work environment.

    • Safety management includes risk assessments to identify hazards and implement controls.

    • Regular safety training and communication are essential for promoting a safety culture.

    • Incident reporting and investigation help in identifying root causes and implementing corrective actions.

    • Safety audits and inspections are...

  • Answered by AI
  • Q2. What is leading and lagging.
  • Ans. 

    Leading and lagging are terms used in project management to describe the relationship between two activities.

    • Leading refers to an activity that must be completed before another activity can start.

    • Lagging refers to an activity that is delayed or starts after another activity has already begun.

    • Leading activities help in speeding up the project schedule, while lagging activities help in delaying the project schedule.

    • For e...

  • Answered by AI
  • Q3. Legal documents are required for lifting equipment.
  • Q4. OSHA Compliances
Round 2 - HR 

(2 Questions)

  • Q1. Disscus about salary .
  • Q2. Disscus about joining date.

HSE Consultant Interview Questions asked at other Companies

Q1. How will you check the effectivness of SMS in the company? What are the main points to be checked during the audit? How the interview of eye witness to be taken during accident investigation?
View answer (1)

Get interview-ready with Top TCE Interview Questions

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
No response

I applied via Campus Placement and was interviewed in Dec 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Quantitative reasoning andtranducer English.

Round 2 - Technical 

(1 Question)

  • Q1. What is a transducer
Round 3 - HR 

(1 Question)

  • Q1. Why do you want to join TCE?

Graduate Trainee Interview Questions asked at other Companies

Q1. Given an array, how do you get the count of pairs that sum to even
View answer (8)

Jobs at TCE

View all
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What are the various code books used in civil engineering?
  • Ans. 

    Various code books used in civil engineering include ACI 318, AISC Steel Construction Manual, and ASCE 7.

    • ACI 318 - American Concrete Institute's Building Code Requirements for Structural Concrete

    • AISC Steel Construction Manual - American Institute of Steel Construction's manual for designing steel structures

    • ASCE 7 - American Society of Civil Engineers' Minimum Design Loads for Buildings and Other Structures

  • Answered by AI
  • Q2. Rcc and steel basic formulas and considerations.

Interview Preparation Tips

Interview preparation tips for other job seekers - Fill ur resume with good projects.
Maintain gpa above 8.0*
Be good at communication.
Chill out don't stress while answering. U'll get ur shot.

Top TCE Engineer Trainee Interview Questions and Answers

Q1. In STAAD what you have done? How you will do the reinforcement calculations?
View answer (2)

Engineer Trainee Interview Questions asked at other Companies

Q1. If 10 people had a meeting and they shake hands only once with each of the others, then how many handshakes will be there in total ?
View answer (8)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(5 Questions)

  • Q1. Sure it possibility
  • Q2. Ok take all responsibility..
  • Q3. Document controller
  • Q4. All deciplen document
  • Q5. Correspondance related job..

Document Controller Interview Questions asked at other Companies

Q1. How many Engineering Documents will be process if you handle EPC project?
View answer (4)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jul 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Basic technical knowledge and aptitude

Round 2 - Technical 

(2 Questions)

  • Q1. Favourite subject
  • Ans. 

    My favourite subject is Mechanical Engineering because I enjoy learning about the principles of mechanics and how machines work.

    • I enjoy studying topics like thermodynamics, fluid mechanics, and materials science.

    • I like working on hands-on projects like designing and building machines or structures.

    • I find the problem-solving aspect of Mechanical Engineering to be challenging and rewarding.

  • Answered by AI
  • Q2. Basic questions on that topic
Round 3 - HR 

(2 Questions)

  • Q1. Why TCE not IT ?
  • Ans. 

    TCE focuses on core engineering principles while IT focuses on information technology.

    • TCE involves designing, building, and maintaining physical structures and systems.

    • IT involves managing and utilizing technology for information processing and communication.

    • TCE requires knowledge of mechanics, materials, and construction techniques.

    • IT requires knowledge of programming, networking, and software development.

    • Examples: Ci...

  • Answered by AI
  • Q2. Why not further education
  • Ans. 

    I believe gaining practical experience in a professional setting will enhance my skills more effectively than further education.

    • I value hands-on experience and believe it is more beneficial for my career growth

    • I want to apply the knowledge I have gained in a real-world setting

    • I prefer to learn through practical application rather than theoretical study

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Best of luck

Top TCE Engineer Trainee Interview Questions and Answers

Q1. In STAAD what you have done? How you will do the reinforcement calculations?
View answer (2)

Engineer Trainee Interview Questions asked at other Companies

Q1. If 10 people had a meeting and they shake hands only once with each of the others, then how many handshakes will be there in total ?
View answer (8)
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
-
Result
No response
Round 1 - Technical 

(2 Questions)

  • Q1. Just basics in java
  • Q2. Advance oops concepts
Round 2 - HR 

(2 Questions)

  • Q1. What do u know about our company
  • Ans. 

    Company is a leading software development firm specializing in creating innovative solutions for various industries.

    • Specializes in creating innovative software solutions

    • Works with clients from various industries

    • Known for high-quality and reliable products

  • Answered by AI
  • Q2. Strengths and waekness

Software Developer Interview Questions asked at other Companies

Q1. Maximum Subarray Sum Problem Statement Given an array of integers, determine the maximum possible sum of any contiguous subarray within the array. Example: Input: array = [34, -50, 42, 14, -5, 86] Output: 137 Explanation: The maximum sum is... read more
View answer (42)

Interview Questions & Answers

user image Anonymous

posted on 19 Jul 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Past experience
  • Q2. How can you contribute to company
Round 2 - One-on-one 

(2 Questions)

  • Q1. Current salary getting in hand
  • Q2. Expected salary

Interview Preparation Tips

Interview preparation tips for other job seekers - Properly go through your past experience

TCE Interview FAQs

How many rounds are there in TCE interview?
TCE interview process usually has 2-3 rounds. The most common rounds in the TCE interview process are Technical, HR and Resume Shortlist.
How to prepare for TCE interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at TCE. The most common topics and skills that interviewers at TCE expect are Consulting, Metallurgy, Hydrogen, Thermal Plant and Mining Engineering.
What are the top questions asked in TCE interview?

Some of the top questions asked at the TCE interview -

  1. If your concrete is M50 and 28 days cube test result is below 100% so that time...read more
  2. What will you do if the site qty differ from Drawing ...read more
  3. If the cubes are failed then what will you d...read more
How long is the TCE interview process?

The duration of TCE interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

TCE Interview Process

based on 200 interviews

Interview experience

4.2
  
Good
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.4k Interviews
Infosys Interview Questions
3.6
 • 7.5k Interviews
Wipro Interview Questions
3.7
 • 5.6k Interviews
Tech Mahindra Interview Questions
3.5
 • 3.8k Interviews
HCLTech Interview Questions
3.5
 • 3.8k Interviews
LTIMindtree Interview Questions
3.8
 • 2.9k Interviews
Mphasis Interview Questions
3.4
 • 790 Interviews
Tata Projects Interview Questions
4.2
 • 425 Interviews
View all

TCE Reviews and Ratings

based on 1.7k reviews

3.8/5

Rating in categories

3.6

Skill development

3.8

Work-life balance

3.3

Salary

3.8

Job security

3.6

Company culture

3.0

Promotions

3.5

Work satisfaction

Explore 1.7k Reviews and Ratings
Assistant Manager
478 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
352 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
321 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
285 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Consultant
254 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare TCE with

Infosys

3.6
Compare

Wipro

3.7
Compare

HCLTech

3.5
Compare

Tech Mahindra

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview