i
Tata Projects
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
Clear (1)
A safety management system is a systematic approach to managing safety, including policies, procedures, and practices.
It involves identifying and assessing risks
Developing and implementing safety policies and procedures
Training employees on safety practices
Monitoring and evaluating safety performance
Continuous improvement through feedback and analysis
Examples include OSHA's Voluntary Protection Program and ISO 45001 st
Emergency planning is the process of preparing for and responding to unexpected events or disasters.
Identifying potential hazards and risks
Developing emergency response procedures
Training employees on emergency protocols
Conducting drills and exercises to test the plan
Maintaining and updating the plan regularly
Confined space is an area with limited entry and exit points, and poor ventilation. UEL stands for Upper Explosive Limit and LEL stands for Lower Explosive Limit.
Confined spaces are often found in tanks, vessels, silos, and pits.
They can pose a serious threat to workers due to the lack of oxygen, toxic gases, and flammable substances.
UEL is the highest concentration of a gas or vapor in air that will burn or explode if...
Work at height refers to any task performed at a height that could cause injury if precautions are not taken.
Examples include working on a ladder, scaffolding, or roof
Precautions include using fall protection equipment and ensuring proper training
Work at height regulations vary by country and industry
Employers have a responsibility to assess and manage the risks associated with work at height
Excavation work involves digging and removing soil or rock to create a hole or trench.
Excavation work requires proper planning and safety measures to prevent accidents.
Workers must be trained on how to operate excavation equipment and use protective gear.
Excavation sites must be inspected regularly for hazards such as unstable soil, underground utilities, and nearby structures.
Proper shoring, sloping, or benching techn...
Check points of a crawler crane include inspection of tracks, boom, cables, hooks, and safety devices.
Inspect tracks for wear and damage
Check boom for cracks and deformation
Inspect cables for fraying and kinks
Check hooks for wear and deformation
Inspect safety devices such as limit switches and overload protection systems
A work permit is a document that authorizes a person to perform a specific job or task in a designated area.
Work permits are used to ensure that work is carried out safely and in compliance with regulations.
They are typically issued by a supervisor or manager and may require specific training or qualifications.
Examples of work permits include hot work permits, confined space entry permits, and excavation permits.
Work p...
Before starting blasting activity, safety points that should be checked are...
Checking the blast area for any potential hazards
Ensuring that all personnel are at a safe distance from the blast site
Checking the weather conditions to ensure that the blast will not be affected by wind or rain
Ensuring that all equipment is in good working condition
Checking that all necessary permits and approvals have been obtained
Ensuring...
JSA stands for Job Safety Analysis, HIRA stands for Hazard Identification and Risk Assessment, and MS stands for Management System.
JSA is a process of identifying potential hazards and risks associated with a specific job or task.
HIRA is a systematic approach to identifying and assessing potential hazards and risks in a workplace.
MS refers to a set of policies, procedures, and practices that an organization uses to man...
Top trending discussions
I applied via Naukri.com and was interviewed in Dec 2017. There were 4 interview rounds.
Experienced safety officer with a background in industrial safety protocols and emergency response procedures.
Over 5 years of experience in implementing safety measures in industrial settings
Proficient in conducting safety audits and inspections to ensure compliance with regulations
Skilled in developing and implementing safety training programs for employees
Strong knowledge of emergency response protocols and procedure...
Safety Officers are responsible for ensuring the safety of employees in the workplace by implementing safety protocols and procedures.
Develop and implement safety policies and procedures
Conduct regular safety inspections and audits
Investigate accidents and incidents to determine root causes
Provide safety training to employees
Ensure compliance with safety regulations and standards
Maintain safety records and reports
posted on 12 Jun 2020
posted on 27 Jul 2020
I applied via Walk-in and was interviewed before Jul 2019. There was 1 interview round.
HSE Supervisor/Officer is responsible for ensuring compliance with health, safety, and environmental regulations in the workplace.
Developing and implementing safety policies and procedures
Conducting regular inspections and audits to identify potential hazards
Training employees on safety protocols and emergency procedures
Investigating accidents and incidents to determine root causes and prevent future occurrences
Maintai...
To manage with site team for following safety rules, effective communication, training, and enforcement are key.
Establish clear safety policies and procedures
Communicate the importance of safety to the team
Provide regular safety training and education
Lead by example and consistently enforce safety rules
Encourage reporting of safety concerns and near misses
Conduct regular safety inspections and audits
Recognize and rewar...
posted on 2 Nov 2021
I applied via Referral and was interviewed before Nov 2020. There was 1 interview round.
Height work safety involves implementing control measures to prevent falls and injuries.
Conducting a risk assessment before starting any work at height
Providing appropriate training and equipment for workers
Implementing a fall protection plan
Regularly inspecting equipment and ensuring it is in good condition
Establishing clear communication and emergency procedures
Examples of control measures include guardrails, safety ...
posted on 2 Nov 2021
I applied via Referral and was interviewed before Nov 2020. There was 1 interview round.
posted on 26 Dec 2021
I applied via Walk-in and was interviewed in Nov 2021. There was 1 interview round.
HIRA stands for Hazard Identification and Risk Assessment.
HIRA is a systematic process of identifying potential hazards and analyzing the associated risks.
It involves identifying the hazards, assessing the risks, and implementing control measures to mitigate the risks.
HIRA is an important tool for safety officers to ensure the safety of employees and the workplace.
Examples of hazards that can be identified through HIRA...
I'm sorry, but the question is not clear and seems to be incomplete.
Please provide more context or rephrase the question.
Without proper information, I cannot provide a relevant answer.
Kindly clarify the question so that I can assist you better.
LMR full from refers to a situation where the Land Mobile Radio system is at maximum capacity.
LMR full from means that the Land Mobile Radio system is unable to accommodate any more users or communications.
This can occur when all available channels or frequencies are in use.
It may result in communication delays or the inability to establish new connections.
LMR full from can impact the effectiveness of emergency respons...
Safety is the state of being protected from harm, danger, or injury.
Safety involves identifying and assessing potential hazards
It requires implementing measures to prevent or mitigate those hazards
It involves training and educating individuals on safe practices
Safety is a continuous process that requires ongoing evaluation and improvement
Examples of safety measures include wearing personal protective equipment, followi...
Shutting down work is a crucial safety measure to prevent accidents and ensure the well-being of workers.
Shutting down work may be necessary in case of an imminent danger or hazard that cannot be immediately controlled.
It is important to have clear protocols and procedures in place for shutting down work in different scenarios.
Examples of situations that may require work shutdown include gas leaks, chemical spills, str...
An accident is an unexpected and unintentional event that causes harm or damage.
Accidents can happen in any setting, including workplaces, homes, and on the road.
They can result in physical injuries, property damage, or both.
Accidents can be caused by human error, equipment failure, or environmental factors.
Examples of accidents include slips and falls, car crashes, and machinery malfunctions.
An incident is an unplanned event that results in injury, damage, or loss.
Incidents can occur in any workplace or environment
They can range from minor incidents such as slips and falls to major incidents such as explosions or fires
Incidents should be reported and investigated to prevent future occurrences
Proper safety measures and training can help prevent incidents from happening
posted on 7 Aug 2023
I applied via Company Website and was interviewed in Mar 2023. There were 5 interview rounds.
Scaffolding job safety analysis
What is mean by risk and hazards
Hazards identify on height work
posted on 31 Jan 2024
Safety is the state of being protected from harm or danger. A hazard is a potential source of harm or adverse health effects.
Safety refers to measures taken to prevent accidents, injuries, or harm to individuals or property.
Hazards are conditions or situations that have the potential to cause harm, such as chemicals, machinery, or unsafe work practices.
Safety supervisors are responsible for identifying and mitigating h...
A fire hydrant is used to access a water supply for firefighting purposes.
Locate the fire hydrant in the vicinity.
Remove the hydrant cap or cover.
Attach a fire hose to the outlet of the hydrant.
Open the hydrant valve to release water.
Control the flow of water using the hydrant valve.
Close the hydrant valve and remove the hose when finished.
posted on 19 Feb 2024
I applied via Walk-in and was interviewed before Feb 2023. There were 2 interview rounds.
Emergency preparedness is a well-known concept in protecting workers' safety and health. Putting together a comprehensive emergency action plan involves conducting a hazard assessment to determine what, if any, physical or chemical hazards inside or from outside the workplaces could cause an emergency.
Make sure electrical equipment is properly connected, grounded and in good working order. Extension cords may not be used as permanent wiring and should be removed after temporary use for an activity or event.
FIRE FIGHTING SYSTEMS · a large store of water in tanks, either underground or on top of the building, called fire storage tanks · a specialised pumping system, ...
Deputy Manager
1.2k
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
716
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
406
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
390
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Manager
365
salaries
| ₹0 L/yr - ₹0 L/yr |
Larsen & Toubro Limited
Reliance Infrastructure
GMR Group
Hindustan Construction Company